Nothing Ear 2
See price on AmazonOverall Score 7 Represents average audio ecosystem compatibility score.
Ingress protection ratings refer to the rank of protection offered by a casing, against solids and water. The letters 'IP' are followed by two values The first value of the IP rating represents protection against solids such as dust, while the second refers to protection against liquids (water).
Having a value of IP54, the Nothing Ear 2's rating for solids indicates that ingress of dust is not totally prevented but dust does not enter in harmful quantities to interfere with the correct operation or impair safety, and of liquids that they can withstand low pressure spray similar to that of a shower head when tilted at 180° for 10 minutes.
The Nothing Ear 2 have a weight of 9g . We consider a lower weight better because lighter devices are more comfortable to move with.
For a device to be true wireless it should have no cables connecting any part of the device together, Nothing Ear 2 are true wireless for this matter since they have no wires. This is a major distinction since wireless earbuds have cables linking the 2 earbuds .
Nothing Ear 2 are resistant to sweat
The earbud foam is designed to be ultracompact and lightweight, with almost no interference with earrings, spectacles, hats, or hairstyles. The Nothing Ear 2 have an earbud foam for some people it is more comfortable than the in-ear foam.
Nothing Ear 2 have stereo speakers, devices with stereo speakers deliver sound from separate channels on both left and right sides, creating a richer sound and a better listening experience.
ANC uses advanced kind of tech to reduce ambient sounds. ANC works when, it listens to the sound pattern outside and inside the earbud and after inverts the soundwaves to cancel it out. Simply put, it's like having +1 (sound from your surrounding) then producing -1 (counter sound by the device) giving zero therefore "diluting" the noise.
Nothing Ear 2 have ANC allowing you to listen at lower volume levels, causing less ear fatigue since you don't need to crank up the device volume to outcompete background noise.
The Nothing Ear 2 stay well in place, creating a sound covering that tones down your environment noise well as preventing the device voice audio from leaking out at the same.
The Nothing Ear 2 have a unit size of 11.6mm in diameter, bigger drivers are more powerful, therefor producing better bass. The driver unit is the component that makes sound in the earbuds, the unit size determines the loudness of the device.
Nothing Ear 2's lowest frequency is at 20Hz, low-frequency response measures if and how well an audio device generates low recognizable frequencies and if it makes any changes to the signal while at it.
The Nothing Ear 2's highest frequency is at 20,000Hz, high-frequency response tells how well an audio component generates high audible frequencies and if it makes any adjustments to the signal on its way through.
The Nothing Ear 2's battery life is 6 hours, these last longer than 5 hours of listening which is considered average for a single charge. A device's battery life is usually given by the manufacturer, and with more battery hours, you get to use it for longer and have to charge the device less often.
The battery life of the charging case is given by the vendor, and the Nothing Ear 2's case is said to have a charge of 30 hours. A charging case with a longer battery life allows you to recharge your earbuds on the go multiple times before recharging the case itself.
It requires 1 hours to fully charge the Nothing Ear 2's battery. It is recommended to charge fully the battery before using the earbuds when they have been unused for extended periods.
Nothing Ear 2's battery capacity is 33mAh, battery capacity, represents the amount of electrical energy that a battery can keep.
Nothing Ear 2, the device supports wireless charging. To charge the earbuds, you just put down on a compatible charging pad.
Nothing Ear 2 have a battery level indicator, an indicator alerts you when the device has a low battery. Its lights indicate the charging status of your device and charging case.
The Nothing Ear 2 support USB TYPE-C, a standard connector for transmitting both data and power through a single cable.
Nothing Ear 2 have Bluetooth version of 5.3, Bluetooth is a wireless technology standard that enables data movement between devices placed in close proximity, using short-wavelength, ultra-high frequency radio waves.
The Nothing Ear 2 have a 10meters distance connecting via Bluetooth.
Nothing Ear 2 support AAC, a codec that is used for Bluetooth audio. It supports 24-bit audio at 250kbps. Because it uses psychoacoustic modeling, it can provide better results than other codecs at the same bit rate.
Since its the highest quality codec that any Bluetooth-supporting Apple product supports, the Nothing Ear 2 will work well with your MacBook. If you intend on using these with Android , ensure that they also support aptX HD, LDAC, or LHDC as well.
Nothing Ear 2 have 6 microphones.
Nothing Ear 2 have a noise-canceling microphone, these microphones are made to reduce background sounds from the earbuds' sound.
The Nothing Ear 2 microphone sensitivity is measured at -40dBV/Pa. The vastness of the analog or digital output signal from the microphone with its input stimulus is a measure of its sensitivity. It's the 'loudness' of the sound that the microphone can pick up.
Nothing Ear 2 support ambient sound mode, which uses microphones to pass through ambient sound so that they can still be heard even while wearing the earbuds
Nothing Ear 2 support in/on-ear detection, the sensors in the earbuds can detect when they are removed from your ears .
When lost in a room, or can't be found in your bag, the Nothing Ear 2 support the find earbuds feature.
The Nothing Ear 2 support fast charging. Most often, technologies like Qualcomm’s Quick Charge, are used to reduce the time it takes to charge the earbuds.
The Nothing Ear 2 have a multipoint of 2 connections, this feature allows you connect to more than one Bluetooth device and switch between them. Say, you can easily switch calls from one device to another without manually disconnect and reconnect.
Nothing Ear 2 have a mute function, they have the option to mute/unmute a conversation directly from the earbuds.
The Nothing Ear 2, so you can access the volume control, pause, play, mute, etc whichever functions are supported on the device.
The Nothing Ear 2 have voice prompts. Automatically receive information through audio messages, like if there is a problem with the connection.
The Nothing Ear 2 come with their own special case. Carrying earbuds openly, or placing them in your bag without a casing may easily put them at risk of getting damaged.