Nothing Ear 2
See price on AmazonOverall Score 7.8 Represents average audio ecosystem compatibility score.
Ingress protection ratings refer to the level of protection given by a casing, against solids and water. The letters 'IP' are followed by two values The first value represents protection against solids say dust, while the second refers to resistance against liquids (sweat).
Having a value of IP54, the Nothing Ear 2's rating is read as, the first value of 5 denotes that ingress of dust is not totally prevented but dust does not enter in harmful quantities to interfere with the correct operation or impair safety, and the second value of 4 means that they can withstand low pressure spray similar to that of a shower head when tilted at 180° for 10 minutes.
Nothing Ear 2 have a weight of 9g . We take in account a lower weight best for the reason that lighter devices are more comfortable to carry.
For a device to be true wireless it must have no wires linking any part of the device together, Nothing Ear 2 are true wireless for this case since they don't have cables. This is a key distinction since wireless earbuds have wires linking the pair of earbuds .
Nothing Ear 2 are resistant to sweat
Nothing Ear 2 have stereo speakers, what this means is that Nothing Ear 2's speakers deliver sound from independent channels on both left and right sides, creating a richer sound and a better listening experience.
ANC uses advanced kind of tech to actively counter noise. ANC works when, it studies the sound pattern of incoming noise and then inverts the soundwaves to counter it. In simple terms, it's like having +1 (noise) and producing -1 (inverted noise) giving zero which results in a reduced level of noise.
The Nothing Ear 2 have Active Noise Cancellation allowing you to listen at lower volume levels, good for your ears since you don't need to crank up the device volume to outcompete background sounds.
Nothing Ear 2 stay tightly in place, creating an acoustic seal that tones down background noise and also prevents the earbuds music from leaking out .
Nothing Ear 2 driver unit is 11.6mm in diameter, bigger drivers are more powerful, and can produce better bass. A driver unit is basically a mini speaker that produces sound in the device, the unit size dictates the sound produced by the earbuds.
Nothing Ear 2's lowest frequency is at 20Hz, low-frequency response measures if and how well a particular audio component produces low frequencies that can be heard, and if it makes any changes to the signal on its way through.
Nothing Ear 2's highest frequency is at 20,000Hz, high-frequency response shows how well a particular audio device generates high human frequencies and if it makes any changes to the signal while at it.
The Nothing Ear 2's battery life is 6 hours, these last longer than 5 hours of listening which is considered average before recharge. A device's battery life is given by the manufacturer, and with more battery hours, you get to use it for longer and requires fewer chargings.
The battery life of the charging case is given by the manufacturer, and Nothing Ear 2's case has a full charge of 30 hours. A charging case with more battery hours allows you to recharge your earbuds on the go many times before recharging the case itself.
It takes 1 hours to fully charge the Nothing Ear 2's battery. It is recommended to charge fully the battery before using the earbuds for the first time.
The Nothing Ear 2, the device supports wireless charging. To charge the earbuds, you just place down on a supported charging pad.
Nothing Ear 2 have a battery level indicator, an indicator notifies you when the earbuds has a low battery. The battery indicator lights indicate the charging status of your earbuds and case.
The Nothing Ear 2 support USB TYPE-C, a standard connector for transmitting both data and power through a single cable.
The Nothing Ear 2 have Bluetooth version of 5.3, Bluetooth is a wireless technology standard that allows data movement between devices placed in close proximity, using short-wavelength, ultra-high frequency radio waves.
Nothing Ear 2 have a 10meters distance to connect via Bluetooth.
Nothing Ear 2 support AAC, a codec used for Bluetooth audio. It supports 24-bit audio at 250kbps. Because it uses psychoacoustic modeling, it can provide better results than other codecs at the same bit rate.
Since its the highest quality codec that any Bluetooth-supporting Apple product supports, the Nothing Ear 2 will work well with your iPhone. If you intend on using these with Android you need to pay even closer attention to codec support for if they only have AAC they won't provide the best audio quality possible, ensure that they also support aptX HD, LDAC, or LHDC as well.
The Nothing Ear 2 have 6 microphones.
The Nothing Ear 2 have a noise-canceling type of microphone, these microphones are intended to filter out background sounds from the earbuds' sound.
The Nothing Ear 2 microphone sensitivity is measured at -40dBV/Pa. The magnitude of the analog or digital output signal from the microphone with its input stimulus is a measure of its sensitivity. It's the 'loudness' of the sound that the microphone can pick up.
Nothing Ear 2 support ambient sound mode, which uses microphones to channel ambient noises to still be heard even when wearing the earbuds
The Nothing Ear 2 have in/on-ear detection, the sensors in the device can detect when they are removed from your ears .
When misplaced in a room, or can't easily find them in your bag, the Nothing Ear 2 have a find earbuds feature.
The Nothing Ear 2 support fast charging. Usually, technologies like Qualcomm’s Quick Charge, are used to reduce the amount of time it takes to charge the earbuds.
Nothing Ear 2 support multipoint of 2 connections, this feature allows you connect to more than one Bluetooth device and switch between them. For example, you can switch calls from one device to another without manually disconnect and reconnect.
Nothing Ear 2 have a mute function, they have the feature to mute/unmute a conversation directly from the device.
With the Nothing Ear 2, so you can easily access the volume control, pause, play, mute, etc whichever features are supported on the earbuds.
The Nothing Ear 2 support voice prompts. Automatically receive information through audio messages, say if there is a problem with the connection.
The Nothing Ear 2 come with their own special pouch. Carrying earbuds without a case, or putting them in your pockets without a cover can easily put them at risk of getting damaged.