Anker Soundcore Liberty 3 Pro Review

Ingress protection ratings is the rank of protection offered by an enclosure, against solids and water. The letters 'IP' are followed by two values The first value means protection against solids say dust, followed by the one that refers to resistance against liquids (water).

Having a value of IPX4, the Anker Soundcore Liberty 3 Pro's rating is read as, the first number of X denotes that no data available to specify a protection rating, and the second number of 4 means that they can withstand low pressure spray similar to that of a shower head when tilted at 180° for 10 minutes. The Anker Soundcore Liberty 3 Pro have a weight of 12g . We take in account a lower weight better because lighter devices are easier to move with.

For a device to be true wireless it should have no wires linking any part of the device together, Anker Soundcore Liberty 3 Pro are true wireless for this case since they have no cables. This is an important difference as some wireless earbuds have wires linking the two earbuds . Anker Soundcore Liberty 3 Pro have wingtips, these are reserved for workout earbuds and are usually an optional add-on to each silicone ear tip for a better fit. Anker Soundcore Liberty 3 Pro have sweat resistance Anker Soundcore Liberty 3 Pro have stereo speakers, devices with stereo speakers deliver sound from separate channels on both left and right sides, this creates a richer sound and a better listening experience.

ANC utilises advanced technology to actively cancel noise. How it works, it studies the sound pattern outside and inside the earbud and after inverts the soundwaves to cancel it out. In simple terms, it's like having +1 (noise) then adding -1 (inverted noise) giving 0 which results in a reduced level of noise.

The Anker Soundcore Liberty 3 Pro have ANC allowing you to listen at lower volume levels, good for your ears as you don't need to crank up the device volume to overcome background sounds. The Anker Soundcore Liberty 3 Pro stay tightly in place, this creates an acoustic seal that reduces your environment sounds while preventing the device music from leaking out . The Anker Soundcore Liberty 3 Pro have a unit size of 10.6mm in diameter, bigger drivers are more powerful, and can produce better bass. A driver unit is basically a mini speaker that produces sound in the earbuds, the unit size dictates the sound made by the earbuds.

The Anker Soundcore Liberty 3 Pro's lowest frequency is at 20Hz, low-frequency response inidcates how well an audio component produces low frequencies that can be heard, and if it alters the signal while at it. The Anker Soundcore Liberty 3 Pro's highest frequency is at 40,000Hz, high-frequency response indicates how well an audio device generates high human frequencies and if it makes any adjustments to the signal while at it. SPL, is the level of pressure of sound, in decibels, dB, Anker Soundcore Liberty 3 Pro's measurement is 92dB/mW.

Devices with a higher sound pressure level are generally louder when supplied with any given audio source. The Anker Soundcore Liberty 3 Pro's battery life is 8 hours, these last longer than 5 hours of listening which is considered average before recharge. A device's battery life is usually given by the manufacturer, and with longer battery life, you get to use it for longer and have to charge the device less often.

This is given by the manufacturer, and Anker Soundcore Liberty 3 Pro's case has a charge of 24 hours. A charging case with a longer battery life enables you to recharge your earbuds on the go several times before having to recharge the case itself. It requires 2 hours to fully charge the Anker Soundcore Liberty 3 Pro's battery.

It is highly adivsable to fully charge the battery before using the earbuds for the first time. The Anker Soundcore Liberty 3 Pro, the device supports wireless charging. To charge the device, you simply place down on a supported charging pad.

Anker Soundcore Liberty 3 Pro have a battery level indicator, an indicator shows you when the device has a low battery. Its lights display the charging status of your earbuds and case. The Anker Soundcore Liberty 3 Pro use USB TYPE-C, a standard connector for transmitting both data and power through a single cable.

Anker Soundcore Liberty 3 Pro have Bluetooth version of 5.2, Bluetooth is a wireless technology standard that allows data movement between devices placed in range, using short-wavelength, ultra-high frequency radio waves. The Anker Soundcore Liberty 3 Pro have a 10meters distance connecting via Bluetooth. Anker Soundcore Liberty 3 Pro support AAC, a codec that is used for Bluetooth audio.

It supports 24-bit audio at 250kbps. Since it uses psychoacoustic modeling, it provides better results than other codecs at the same bit rate.

Being the highest quality codec that any Bluetooth-supporting Apple product supports, the Anker Soundcore Liberty 3 Pro will work fine with your MacBook.

If you intend on using these with Android , ensure that they also support aptX HD, LDAC, or LHDC as well. The Anker Soundcore Liberty 3 Pro support LDAC, a codec developed by Sony which allows streaming high-resolution audio over Bluetooth connections at up to 990 kbps at 32 bit/96 kHz. It is capable of a very high bitrate of 990kbps, providing high-resolution audio.

Anker Soundcore Liberty 3 Pro have 6 microphones. Anker Soundcore Liberty 3 Pro use a noise-canceling type of microphone, these microphones are intended to reduce noise from the earbuds' sound. Anker Soundcore Liberty 3 Pro support ambient sound mode, which uses microphones to pass through ambient noises so that they can still be heard even when wearing them The Anker Soundcore Liberty 3 Pro support in/on-ear detection, the sensors in the earbuds can detect when removed from your ears . When misplaced in a room, or can't be found in your bag, Anker Soundcore Liberty 3 Pro support the find earbuds feature.

Anker Soundcore Liberty 3 Pro support fast charging. Usually, technologies like MediaTek’s Pump Express, are used to lower the amount of time it takes to fully charge a device. Anker Soundcore Liberty 3 Pro support multipoint of 2 connections, this feature allows you connect to more than one Bluetooth device and switch between them.

Say, you can switch calls from one device to another without having to manually disconnect and reconnect. Anker Soundcore Liberty 3 Pro have a mute function, they have the option to mute/unmute a conversation directly from the earbuds. With the Anker Soundcore Liberty 3 Pro, so you can easily access the volume control, pause, play, mute, etc whichever functions are supported on the earbuds.

The Anker Soundcore Liberty 3 Pro have a warranty period of 1 Years, the period of time that warrant free repair and adjustment services in case of a malfunction occurring under normal use that has followed instruction manuals. The Anker Soundcore Liberty 3 Pro have voice prompts. Automatically receive information via audio messages, like if there is a problem with the connection.

The Anker Soundcore Liberty 3 Pro come with a special case. Carrying earphones openly, or putting them in your pockets without a cover can easily put them at risk of getting damaged.