Razer Hammerhead Pro HyperSpeedSee price on Amazon
Overall Score 7.4 Represents average audio ecosystem compatibility score.
JBL Endurance Peak 2See price on Amazon
Overall Score 5.7 Represents average audio ecosystem compatibility score.
|Razer Hammerhead Pro HyperSpeed
|JBL Endurance Peak 2
|ingress protection (ip) rating
|has no wires or cables
|has an earbud foam
|has stereo speakers
|has active noise cancellation (noise control)
|has passive noise reduction
|driver unit size
|sound pressure level
|battery life of charging case
|has wireless charging
|has a battery level indicator
|has usb type-c
|maximum bluetooth range
|number of microphones
|has a noise-canceling microphone
|highest mic frequency
|lowest mic frequency
|has ambient sound mode
|has in/on-ear detection
|supports fast charging
|has a mute function
|control panel placed on a device
|has voice prompts
|travel bag is included
|See price on Amazon
|See price on Amazon
Ingress protection ratings is the level of protection given by an enclosure, against dust and water. In the format of IPXX, 'X' represents a number The first value represents protection against solids say dust, followed by the one that refers to resistance against liquids (sweat).
Having a value of IPX4, the Razer Hammerhead Pro HyperSpeed's rating is read as, the first value of X denotes that no data available to specify a protection rating, and of liquids that they can withstand low pressure spray similar to that of a shower head when tilted at 180° for 10 minutes.
In comparison to the Razer Hammerhead Pro HyperSpeed, JBL Endurance Peak 2 have a rating of IPX7 meaning that we are not yet certain of their rating with solids (dust) and that of liquids is that, JBL Endurance Peak 2 has a higher liquid rating than Razer Hammerhead Pro HyperSpeed
Razer Hammerhead Pro HyperSpeed have a weight of 12g . We prefer a lower weight best for the reason that lighter devices are easier to move with.
The JBL Endurance Peak 2, at 26g are heavier than the Razer Hammerhead Pro HyperSpeed with a difference of 14g
For a device to be true wireless it should have no cables linking any part of the device together, Razer Hammerhead Pro HyperSpeed are true wireless for this matter since they don't have wires. This is an important difference since wireless earbuds have cables linking the two earbuds together.
JBL Endurance Peak 2 also is true wireless since it doesn't have cables connecting the 2 earbuds .
JBL Endurance Peak 2 have wingtips, these are commonly used for earbuds for workouts and are usually an optional add-on to the separate silicone ear tip for a more secure fit.
Razer Hammerhead Pro HyperSpeed have sweat resistance
JBL Endurance Peak 2's resistance to sweat makes both devices good for use during long-distance running, marathons, training in workout bodysuits, etc
The earbud foam is designed to be ultracompact and lightweight, with little interference with earrings, spectacles, hats, or hairstyles. The Razer Hammerhead Pro HyperSpeed have an earbud foam to some it is more comfortable than the in-ear foam.
Razer Hammerhead Pro HyperSpeed have stereo speakers, devices with stereo speakers deliver sound from separate channels on both left and right sides, this creates a richer sound and a better listening experience.
Both JBL Endurance Peak 2 and Razer Hammerhead Pro HyperSpeed have stereo speakers
Active noise cancellation makes use of advanced kind of tech to actively counter noise. How it works, it detects and analyzes the sound pattern of incoming noise and inverts the soundwaves to counter it. Simply put, it's like taking +1 (sound from your surrounding) then adding -1 (inverted noise) giving zero resulting in a reduced level of noise.
Razer Hammerhead Pro HyperSpeed have ANC enabling you to listen at lower levels of volume, good for your ears since you don't need to crank up the earbuds volume to outcompete background noise.
Razer Hammerhead Pro HyperSpeed sit tightly in place, creating an acoustic covering that reduces your environment noise and also prevents the earbuds music from leaking out at the same.
Both JBL Endurance Peak 2, and Razer Hammerhead Pro HyperSpeed have passive noise reduction which implies that they tone down ambient noise without using ANC to cancel it out.
Razer Hammerhead Pro HyperSpeed have a unit size of 10mm in diameter, the bigger the unit the more powerful, and can produce better bass.
A driver unit is the component that makes sound in the device, its size dictates the sound produced by the device.
JBL Endurance Peak 2 driver unit is 10mm in diameter, making both devices similar in how loud their sound gets , as many tend to believe that driver units of a bigger size automatically produce better sound quality.
However, large drivers usually have difficulty producing high frequencies so yes, larger drivers are capable of generating louder sound, but this does not mean that they produce better quality sound.
The Razer Hammerhead Pro HyperSpeed's lowest frequency is at 20Hz, low-frequency response measures if and how well an audio device generates low audible frequencies and if it makes any changes to the signal on its way through.
JBL Endurance Peak 2's lowest frequency is at 20Hz, this means that both devices make sound with equal bass
The Razer Hammerhead Pro HyperSpeed's highest frequency is at 20,000Hz, high-frequency response measures if and how well an audio device produces high human frequencies and if it changes to the signal on its way through.
JBL Endurance Peak 2's highest frequency is at 20,000Hz, this means that both devices produce equal treble
The sound pressure level, is the pressure level of sound, measured in decibels, dB, Razer Hammerhead Pro HyperSpeed's measurement is 95dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source.
JBL Endurance Peak 2's sound pressure level measurement is 93dB/mW. The sound pressure level, something is can be taken differently by different persons, so we need to have a way of getting an objective measurement of sound level expressed in numerical terms.
Razer Hammerhead Pro HyperSpeed's battery life is 6.5 hours, these last longer than 5 hours of listening which is considered average before recharge. A device's battery life is commonly given by the manufacturer, and with longer battery life, you get to use it for longer and requires fewer chargings.
JBL Endurance Peak 2's battery life is less than that of Razer Hammerhead Pro HyperSpeed by 0.5 hours . Each time you recharge your device, they get a little less playing time. The effect is barely noticeable at first, but over a few years, your wireless earbuds will have shorter listening time.
This is given by the vendor, and Razer Hammerhead Pro HyperSpeed's case has a charge of 24 hours. A charging case with a longer battery life allows you to recharge your earbuds on the go multiple times before recharging the case itself.
JBL Endurance Peak 2's charging case has a battery life of 24 hours, equal to that of the Razer Hammerhead Pro HyperSpeed
It requires 3 hours to fully charge the Razer Hammerhead Pro HyperSpeed's battery. It is recommended to fully charge the battery before using the earbuds when they have been unused for long periods.
JBL Endurance Peak 2 takes 2 hours to fully charge the battery, less than that of Razer Hammerhead Pro HyperSpeed by 1 hours
JBL Endurance Peak 2's battery power is 60mAh, battery capacity, shows the amount of electrical energy that a battery can store.
Razer Hammerhead Pro HyperSpeed, the device supports wireless charging. To charge the device, you just put down on a supported charging pad.
The Razer Hammerhead Pro HyperSpeed have a battery level indicator, an indicator notifies you when the device has a low battery. The battery indicator lights indicate the charging state of your earbuds and case.
JBL Endurance Peak 2 too have a battery level indicator, these enable you determine the charging state of your earbuds, whether fully charged, or the battery is running low.
Razer Hammerhead Pro HyperSpeed use USB TYPE-C, a standard connector for transmitting both data and power in a single cable.
JBL Endurance Peak 2 too support USB TYPE-C. This USB-C plug is part and parcel of most current electronics.
Razer Hammerhead Pro HyperSpeed have Bluetooth version of 5.3, Bluetooth is a wireless technology standard that enables data movement between devices placed in close proximity, using short-wavelength, ultra-high frequency radio waves.
JBL Endurance Peak 2 has a Bluetooth version of 5, older than that of Razer Hammerhead Pro HyperSpeed . Newer versions provide faster data transfers.
The Razer Hammerhead Pro HyperSpeed have a 10meters distance to connect via Bluetooth.
JBL Endurance Peak 2 have a maximum range of 10meters, equal to that of the Razer Hammerhead Pro HyperSpeed
Razer Hammerhead Pro HyperSpeed support AAC, a codec used for Bluetooth audio. It supports 24-bit audio at 250kbps. Since it uses psychoacoustic modeling, it can provide better results than other codecs at the same bit rate.
Being the highest quality codec that any Bluetooth-supporting Apple product supports, the Razer Hammerhead Pro HyperSpeed will work well with your iPhone. If you intend on using these with Android , ensure that they also support aptX HD, LDAC, or LHDC as well.
The JBL Endurance Peak 2 support AAC as well. Designed to be the successor of the MP3 format, AAC generally achieves higher sound quality than MP3 encoders at the same bit rate.
Latency refers to the time it takes for the audio signal to be transmitted to your earbuds. Razer Hammerhead Pro HyperSpeed have a latency of 40ms, a lower latency reduces audio lag and is particularly important when playing games or watching videos.
The JBL Endurance Peak 2 have 2 microphones.
The Razer Hammerhead Pro HyperSpeed have a noise-canceling microphone, these microphones are designed to filter out noise from the desired sound.
Razer Hammerhead Pro HyperSpeed microphone sensitivity is measured at -26dBV/Pa. The extent of the analog or digital output signal from the microphone with its input stimulus is a measure of its sensitivity. It's the 'loudness' of the sound that the microphone can recognize.
While the JBL Endurance Peak 2 microphone sensitivity is measured at -38dBV/Pa. Microphone sensitivity is a measurement of a microphone's efficiency as a transducer.
The Razer Hammerhead Pro HyperSpeed's highest mic frequency is 10,000Hz, high frequencies are better for recording treble. The highest mic frequency of a microphone is defined as its upper limiting frequency.
The Razer Hammerhead Pro HyperSpeed's lowest mic frequency is 100Hz, low frequencies are best for picking up bass. The lowest mic frequency of a microphone is defined as its lower limiting frequency.
The Razer Hammerhead Pro HyperSpeed support ambient sound mode, which uses microphones to pass through ambient noises so that they can still be heard even when wearing them
The Razer Hammerhead Pro HyperSpeed have in/on-ear detection, the sensors in the device can detect when removed from your ears so that the music is paused.
Razer Hammerhead Pro HyperSpeed support fast charging. Commonly, technologies like MediaTek’s Pump Express, are used to lower the amount of time it takes to fully charge the earbuds.
Also the JBL Endurance Peak 2 support fast charging. It's very similar to regular charging, just that the battery is filling up much faster. Say, with Quick Charge 3.0, the battery can be charged to 50% in thirty minutes.
Razer Hammerhead Pro HyperSpeed have a multipoint of 2 connections, this feature allows you connect to more than one Bluetooth device and switch between them. Say, you can switch calls from one device to another without manually disconnect and reconnect.
The Razer Hammerhead Pro HyperSpeed have a mute function, they have the feature to mute/unmute a conversation directly from the device.
With the Razer Hammerhead Pro HyperSpeed, so you can access the volume control, pause, play, mute, etc whichever features are supported on the earbuds.
The JBL Endurance Peak 2 too have a control panel on them.
Razer Hammerhead Pro HyperSpeed have a warranty period of 2 Years, the period of time that warrant free repair and adjustment services in case of a malfunction occurring under normal use that has followed instruction manuals.
When covered under the manufacturer’s warranty it is possible to get a replacement a malfunction occurs. JBL Endurance Peak 2 have a warranty period of 1Years, less than that of Razer Hammerhead Pro HyperSpeed by 1 Years .
Razer Hammerhead Pro HyperSpeed have voice prompts. Automatically receive information through audio messages, say if there is an issue with the connection.
JBL Endurance Peak 2 too support voice prompts .i.e the device notifies you if the battery is running low, and it's time to recharge them.
Razer Hammerhead Pro HyperSpeed come with their own special pouch. Carrying earbuds openly, or placing them inside your bag without a casing may easily damage them.
JBL Endurance Peak 2 too have a travel bag included, which offers safe transportation.