Overall Score 5.3 Represents average audio ecosystem compatibility score.
Overall Score 5.1 Represents average audio ecosystem compatibility score.
Category | Features | Razer Hammerhead True Wireless X | JBL Endurance Peak |
---|---|---|---|
DESIGN | ingress protection (ip) rating | ipX4 | ipX7 |
weight | 20g | 30g | |
has no wires or cables | ✓ | ✓ | |
wingtips included | ✗ | ✓ | |
sweat resistance | ✓ | ✓ | |
is dust proof and water-resistant | ✗ | ✓ | |
has an earbud foam | ✗ | ✓ | |
has stereo speakers | ✓ | ✓ | |
SOUND QUALITY | has active noise cancellation (noise control) | ✗ | ✓ |
driver unit size | 13mm | 10mm | |
lowest frequency | 20hz | 16hz | |
highest frequency | 20,000hz | 22,000hz | |
sound pressure level | 91db/mw | ✗ | |
POWER | battery life | 7hours | 4hours |
battery life of charging case | 21hours | 24hours | |
charge time | 1.5hours | 2hours | |
battery power | ✗ | 75mah | |
has a battery level indicator | ✓ | ✓ | |
CONNECTIVITY | has usb type-c | ✓ | ✗ |
bluetooth version | v5.2 | v4.2 | |
maximum bluetooth range | 10meters | 10meters | |
has aac | ✓ | ✗ | |
audio latency | 60ms | ✗ | |
MICROPHONE | number of microphones | 2only | 1only |
mic sensitivity | -26dbv/pa | ✗ | |
EXTRAS | supports fast charging | ✓ | ✗ |
has a mute function | ✓ | ✗ | |
control panel placed on a device | ✓ | ✓ | |
warranty period | ✗ | 1years | |
has voice prompts | ✓ | ✓ | |
travel bag is included | ✓ | ✓ | |
See price on Amazon | See price on Amazon |
Ingress protection ratings refer to the level of protection given by an enclosure, against solids and liquids. The letters 'IP' are followed by two values The first value refers to protection against solids such as dust, followed by the one that refers to protection against liquids (water).
Scoring IPX4, the Razer Hammerhead True Wireless X's rating is read as, the first value of X denotes that no data available to specify a protection rating, and the second value of 4 means that they can withstand low pressure spray similar to that of a shower head when tilted at 180° for 10 minutes.
Compared to the Razer Hammerhead True Wireless X, JBL Endurance Peak have a rating of IPX7 meaning that
we are not yet certain of their rating with solids (dust)
and that of liquids is that,
JBL Endurance Peak has a higher liquid rating than Razer Hammerhead True Wireless X
The Razer Hammerhead True Wireless X have a weight of 20g . We take in account a lower weight better because lighter devices are more comfortable to transport.
JBL Endurance Peak, at 30g
are heavier than the Razer Hammerhead True Wireless X by of 10g
True wireless devices have no cables linking any part of the device together, Razer Hammerhead True Wireless X are true wireless for this matter since they have no wires. This is a major distinction since wireless earbuds have cables connecting the pair of earbuds together.
JBL Endurance Peak also is true wireless because it has no cables linking the two earbuds .
JBL Endurance Peak have wingtips, these are reserved for earbuds for workouts and are usually an optional add-on to the separate silicone ear tip for a more secure fit.
Razer Hammerhead True Wireless X have sweat resistance
JBL Endurance Peak's resistance to sweat makes both devices good for use while doing sports such as long-distance running, marathons, training in workout bodysuits, etc
The JBL Endurance Peak are both dustproof and water-resistant.
The earbud foam is designed to be ultracompact and lightweight, with little interference with earrings, spectacles, hats, or hairstyles. The JBL Endurance Peak have an earbud foam for some people it is more comfortable than the in-ear foam.
Razer Hammerhead True Wireless X have stereo speakers, what this means is that Razer Hammerhead True Wireless X's speakers deliver sound from independent channels on both left and right sides, creating a richer sound and a better listening experience.
The JBL Endurance Peak also have stereo speakers
ANC uses more advanced kind of tech to reduce unwanted ambient sounds. How it works, it studies the sound pattern outside and inside the earbud and after inverts the soundwaves to cancel it out. In simple terms, it's like taking +1 (sound from your surrounding) and producing -1 (counter sound by the device) to make 0 hence "diluting" the noise.
The JBL Endurance Peak have Active Noise Cancellation enabling you to listen at lower volume levels, good for your ears as you don't have to crank up the earbuds volume to overcome background sounds.
The Razer Hammerhead True Wireless X driver unit is 13mm in diameter, the bigger the unit the more powerful, and can produce better bass.
The driver unit is the component that makes sound in the device, the unit size determines the loudness of the device.
JBL Endurance Peak driver unit is 10mm in diameter,
which means that they have a smaller driver unit than that of Razer Hammerhead True Wireless X by 3mm
, a common assumption that driver units of a bigger size automatically produce better sound quality.
However, large drivers usually have difficulty producing high frequencies so it's true that, larger drivers are capable of generating louder sound, but this does not imply that they deliver better quality sound.
Razer Hammerhead True Wireless X's lowest frequency is at 20Hz, low-frequency response measures if and how well a particular audio device generates low frequencies that can be heard, and if it alters the signal on its way through.
JBL Endurance Peak's lowest frequency is at 16Hz, this implies that
JBL Endurance Peak make sound with a juicier bass than the Razer Hammerhead True Wireless X
The Razer Hammerhead True Wireless X's highest frequency is at 20,000Hz, high-frequency response measures if and how well a particular audio device generates high recognizable frequencies and if it adjustments to the signal while at it.
JBL Endurance Peak's highest frequency is at 22,000Hz, this means that
JBL Endurance Peak produce a clearer and crispier treble than the Razer Hammerhead True Wireless X
SPL, is the level of pressure of sound, measured in decibels, dB, Razer Hammerhead True Wireless X's measurement is 91dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source.
The Razer Hammerhead True Wireless X's battery life is 7 hours, these last longer than 5 hours of listening which is considered average before recharge. A device's battery life is commonly given by the manufacturer, and with longer battery life, you get to use it for longer and have to charge the device less often.
JBL Endurance Peak's battery life is
less than that of Razer Hammerhead True Wireless X by 3 hours
. Every time you recharge your earbuds, they get a little less playing time. The effect is not noticeable at first, but over time, your wireless earbuds will no longer play for long like they used to.
This is given by the manufacturer, and the Razer Hammerhead True Wireless X's case has a full charge of 21 hours. A charging case with a longer battery life enables you to recharge your earbuds on the go many times before recharging the case itself.
JBL Endurance Peak's charging case has a battery life of 24 hours,
more than that of Razer Hammerhead True Wireless X by 3 hours
It takes 1.5 hours to fully charge the Razer Hammerhead True Wireless X's battery. It is highly adivsable to fully charge the battery before using the earbuds for the first time.
JBL Endurance Peak takes 2 hours to fully charge the battery,
more than that of Razer Hammerhead True Wireless X by 0.5 hours
JBL Endurance Peak's battery power is 75mAh, battery power, shows the amount of electrical energy that a battery can keep.
Razer Hammerhead True Wireless X have a battery level indicator, an indicator alerts you when the earbuds has a low battery. Its lights display the charging status of your device and case.
JBL Endurance Peak too have a battery level indicator, charging indicators enable you to determine the charging state of your earbuds, if charged fully, or the battery is running low.
Razer Hammerhead True Wireless X have USB TYPE-C, a standard connector for transmitting both data and power through a single cable.
The Razer Hammerhead True Wireless X have Bluetooth version of 5.2, Bluetooth is a wireless technology standard that allows data movement between devices placed in range, using short-wavelength, ultra-high frequency radio waves.
JBL Endurance Peak has a Bluetooth version of 4.2,
older than that of Razer Hammerhead True Wireless X
. Newer versions provide faster data transfers.
Razer Hammerhead True Wireless X have a 10meters distance to connect via Bluetooth.
JBL Endurance Peak have a maximum range of 10meters,
equal to that of the Razer Hammerhead True Wireless X
Razer Hammerhead True Wireless X support AAC, a codec used for Bluetooth audio. It supports 24-bit audio at 250kbps. Because it uses psychoacoustic modeling, it provides better results than other codecs at the same bit rate.
Since its the highest quality codec that any Bluetooth-supporting Apple product supports, the Razer Hammerhead True Wireless X will work fine with your iPhone. If you are planning on using these with Android you need to pay even closer attention to codec support for if they only have AAC they won't provide the best audio quality possible, ensure that they also support aptX HD, LDAC, or LHDC as well.
Latency refers to the time it takes for the audio signal to be transmitted to your earbuds. Razer Hammerhead True Wireless X have a latency of 60ms, a lower latency reduces audio lag and is particularly important when playing games or watching videos.
Razer Hammerhead True Wireless X have 2 microphones.
The JBL Endurance Peak microphones are 1,
less than that of Razer Hammerhead True Wireless X by 1
. More microphones result in better sound quality and enable the device to filter out background sounds.
The Razer Hammerhead True Wireless X microphone sensitivity is measured at -26dBV/Pa. The size of the analog or digital output signal from the microphone with its input stimulus is a calculation of its sensitivity. It's the 'loudness' of the voice that the microphone can pick up.
The Razer Hammerhead True Wireless X support fast charging. Usually, technologies like Qualcomm’s Quick Charge, are used to lower the time it takes to fully charge a device.
The Razer Hammerhead True Wireless X have a mute function, they support the feature to mute/unmute a conversation directly from the device.
The Razer Hammerhead True Wireless X, so you can easily access the volume control, pause, play, mute, etc whichever features are supported on the device.
JBL Endurance Peak too have a control panel on them.
The JBL Endurance Peak have a warranty period of 1 Years, the period of time that warrant free repair and adjustment services in case of a malfunction occurring under normal use following instruction manuals.
The Razer Hammerhead True Wireless X support voice prompts. Automatically receive information through audio messages, like if there is an issue with the connection.
The JBL Endurance Peak also have voice prompts meaning the device will notify you if the battery is running low, and you need to recharge the earbuds.
The Razer Hammerhead True Wireless X come with their own special case. Carrying earphones openly, or placing them in your pockets without a casing may easily damage them.
JBL Endurance Peak also have a case included, which is useful for safe transportation.