Has Active Noise Cancellation (Noise Control)
Samsung Galaxy Buds Live
✓
JLab Go Air ✗
Active noise cancellation uses advanced kind of tech to reduce unwanted ambient sounds. How it works, it detects and analyzes the sound pattern outside and inside the earbud and then inverts the soundwaves to counter it. Simply put, it's like taking +1 (noise) then producing -1 (inverted noise) to make zero resulting in a reduced level of noise.
Samsung Galaxy Buds Live have ANC allowing you to listen at lower levels of volume, good for your ears since you don't have to crank up the device volume to overcome background noise.
Has Passive Noise Reduction
Samsung Galaxy Buds Live
✗
JLab Go Air ✓
JLab Go Air sit tightly in place, creating an acoustic covering that tones down your environment sounds while preventing the device voice audio from leaking out at the same.
Driver Unit Size
Samsung Galaxy Buds Live
12mm
JLab Go Air 8mm
Samsung Galaxy Buds Live driver unit is 12mm in diameter, bigger drivers are more powerful, and can produce better bass.
A driver unit is the component that produces sound in the earbuds, its size determines the sound produced by the earbuds.
JLab Go Air driver unit is 8mm in diameter,
which means that they have a smaller driver unit than that of Samsung Galaxy Buds Live by 4mm
, as many tend to believe that driver units of a bigger size automatically produce better sound quality.
However, large drivers find it difficult to produce high frequencies so it's true that, larger drivers can generate louder sound, but this does not imply that they produce better quality sound.
Lowest Frequency
Samsung Galaxy Buds Live
20Hz
JLab Go Air 20Hz
The Samsung Galaxy Buds Live's lowest frequency is at 20Hz, low-frequency response inidcates how well an audio device produces low frequencies that can be heard, and if it makes any changes to the signal on its way through.
JLab Go Air's lowest frequency is at 20Hz, this implies that
both devices produce equal bass
Highest Frequency
Samsung Galaxy Buds Live
20000Hz
JLab Go Air 20000Hz
The Samsung Galaxy Buds Live's highest frequency is at 20000Hz, high-frequency response tells how well a particular audio device makes high audible frequencies and if it makes any changes to the signal on its way through.
JLab Go Air's highest frequency is at 20000Hz, this implies that
both devices generate equal treble
Sound Pressure Level
Samsung Galaxy Buds Live
✗
JLab Go Air 103dB/mW
SPL, is the level of pressure of sound, measured in decibels, dB, JLab Go Air's measurement is 103dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source.
Has A Neodymium Magnet
Samsung Galaxy Buds Live
✗
JLab Go Air ✓
The JLab Go Air have neodymium magnets, when used in audio devices produce a higher sensitivity and substantial sound output while using less power. They can help produce music at quite a high SPL, with the use of high magnetic flux.
A Review By Comparison Of The Samsung Galaxy Buds Live Vs. Sony Wf 1000Xm3
A Review By Comparison Of The Huawei Freebuds Pro 2 Vs. Samsung Galaxy Buds Live