Home Headphones Sennheiser Momentum 4 Wireless Vs. Bowers & Wilkins Px7 S2

Sennheiser Momentum 4 Wireless Vs. Bowers & Wilkins Px7 S2 Review

Last updated on Aug 18, 2024   17 minute read
Note: This page may contain affiliate links, we only earn from qualifying purchases!
Sennheiser Momentum 4 Wireless

Sennheiser Momentum 4 Wireless

See price on Amazon

Reasons why you might like the Sennheiser Momentum 4 Wireless

Overall Score 6.4 Represents average audio ecosystem compatibility score.

  • Weight of 293 g
  • Has Active Noise Cancellation (Anc)
  • Battery Life of 60 hours
  • Can Be Used Wirelessly
  • Has Ambient Sound Mode
VS
Bowers & Wilkins PX7 S2

Bowers & Wilkins PX7 S2

See price on Amazon

Reasons why you might like the Bowers & Wilkins PX7 S2

Overall Score 5.8 Represents average audio ecosystem compatibility score.

  • Weight of 307 g
  • Has Active Noise Cancellation (Anc)
  • Battery Life of 30 hours
  • Can Be Used Wirelessly
  • Has Ambient Sound Mode

Sennheiser Momentum 4 Wireless Vs. Bowers & Wilkins Px7 S2 Review In Summary

Category Features Sennheiser Momentum 4 Wireless Bowers & Wilkins PX7 S2
DESIGN weight 293g 307g
has a detachable cable
can be folded
has a tangle free cable
cable length 1.2meters
has an over-the-ear foam
has stereo speakers
SOUND QUALITY has active noise cancellation (anc)
has passive noise reduction
lowest frequency 6Hz
highest frequency 22,000Hz
sound pressure level 106dB/mW
driver unit size 42mm 40mm
impedance 60Ohms
has a neodymium magnet
POWER battery life 60hours 30hours
charge time 2hours 2hours
has a battery level indicator
has wireless charging
battery power 700mAhmAh
has a rechargeable battery
CONNECTIVITY can be used wirelessly
bluetooth version v5.2 v5.2
has usb type-c
has aptx adaptive
has aptx hd
has bluetooth aptx
has aac
maximum bluetooth range 10meters 10meters
supports bluetooth pairing using nfc
MICROPHONE number of microphones 4only 6only
has a noise-canceling microphone
highest mic frequency 10,000Hz
lowest mic frequency 50Hz
EXTRAS has ambient sound mode
has in/on-ear detection
has a mute function
control panel placed on a device
can be used as a headset
travel bag is included
See price on Amazon See price on Amazon

Sennheiser Momentum 4 Wireless have a weight of 293g, these weigh below 320g, which we consider as the highest average a headphone should weigh for comfort during long use. We take in account a lower weight best because lighter devices are more comfortable to carry. Bowers & Wilkins PX7 S2, at 307g are heavier than the Sennheiser Momentum 4 Wireless by 14g Detachable cables are cables that have connectors on both ends.

One end goes into your headphone earpieces, while the other end is inserted into a source device. Some new headphones, and not just the expensive ones, are coming with detachable cables, Sennheiser Momentum 4 Wireless are one of those. With a detachable cable, Bowers & Wilkins PX7 S2 too can use alternative cables and if the cable is pulled, it will pop out instead of breaking.

Twisted headphone cables can be a great source of annoyance and inconvenience, Sennheiser Momentum 4 Wireless's cable is designed to minimize tangling. Constant twisting of the cables can also lead to bends in the copper wires, affecting sound quality, or rendering your headphones defective. Bowers & Wilkins PX7 S2 too have a cable designed to help prevent tangles.

Over-ear headphones have larger earpads that fit around your entire ear Sennheiser Momentum 4 Wireless have a comfortable full-size form with earcups that fully enclose your ears. This design is loved for its increased sound isolation and the fact that it won't leak sound to your neighbors. Bowers & Wilkins PX7 S2 with this design offer potential for maximum bass and loudness levels.

Sennheiser Momentum 4 Wireless have stereo speakers, devices with stereo speakers deliver sound from independent channels on both left and right sides, this creates a richer sound and a better listening experience. Both Bowers & Wilkins PX7 S2 and Sennheiser Momentum 4 Wireless have stereo speakers Active noise cancellation uses more advanced technology to actively counter noise. How it works, it listens to the sound pattern of incoming noise and then generates a mirror signal to cancel it out.

In simple terms, it's like taking +1 outside (noise from your surrounding) and adding -1 inside (counter sound within the device) to make zero hence "diluting" the noise.

Sennheiser Momentum 4 Wireless allow you to listen at lower volume levels, causing less ear fatigue as you don't have to crank up the volume to overcome background noise. Bowers & Wilkins PX7 S2 too have active noise cancellation making both devices ideal for plane rides and morning commutes.

Each may work with different noise cancellation modes, pick the setting, mode, or noise cancellation type that you prefer for commute or that enhances your relaxation time. Low-frequency response measures if and how well an audio component reproduces low audible frequencies and if it makes any changes to the signal on the way through. Sennheiser Momentum 4 Wireless's lowest frequency is at 6Hz, the lower the low-frequency response, the stronger and juicier the bass.

High frequency response measures if and how well an audio device reproduces high audible frequencies and if it changes to the signal on the way through. Sennheiser Momentum 4 Wireless's highest frequency is at 22,000Hz, the higher the high-frequency response, the clearer and crispier the treble. Sound pressure is the average variation in atmospheric pressure caused by the sound, the sound level .i.e how loud something is can be perceived differently by different people so we need to have the means to get an objective measurement of sound level expressed in numerical terms.



The sound pressure level, SPL, is the pressure level of a sound, measured in decibels, dB, Sennheiser Momentum 4 Wireless's measurement is 106dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source. The driver unit is basically a mini speaker that produces sound in the device, its size dictates the loudness of the headphone.

Sennheiser Momentum 4 Wireless driver unit is 42mm in diameter, bigger drivers are more powerful and can produce better bass. Bowers & Wilkins PX7 S2 driver unit is 40mm in diameter, which means that they have a smaller driver unit than that of Sennheiser Momentum 4 Wireless by 2mm , many people have a misconception that driver units of a bigger size automatically produce better sound quality.

However, large drivers usually have difficulty reproducing high frequencies so yes, larger drivers are capable of generating louder sound, but this does not mean that they produce better sound.

Defined as the device's resistance to the electromagnetic current, as electricity flows through a wire, it experiences electrical resistance that counters the flow of current. The resistance of a wire is measured in ohms. Sennheiser Momentum 4 Wireless's impedance is 60Ohms, the lower the impedance, the easier it is to get higher volume and requires less power.

Neodymium magnets when used in audio devices produce a higher sensitivity and substantial sound output while using less power. They can help produce music at quite a high sound pressure level, SPL, with the use of high magnetic flux. The Sennheiser Momentum 4 Wireless have this type of magnet.

If your headphones play wirelessly, cancel ambient noise, or enhance your listening experience with active features, their battery life will reduce over time. The device's battery life is given by the manufacturer, with longer battery life, you get to use it for longer and have to charge the device less often. Sennheiser Momentum 4 Wireless's battery life is 60 hours Bowers & Wilkins PX7 S2's battery life is 30 hours.

Each time you recharge your headphones, they get a little less listening time. The effect is barely noticeable at first. But over a few years, you may find that your device, no longer plays for long like it used to.

It takes 2 hours to fully charge the Sennheiser Momentum 4 Wireless's battery. It is recommended to fully charge the battery before using the headphones for the first time or when they have been unused for extended periods. Bowers & Wilkins PX7 S2 takes 2 hours to fully charge the battery Sennheiser Momentum 4 Wireless have a battery level indicator, an indicator shows you when the device has a low battery.

The battery indicator lights indicate the charging status of your headphones. Bowers & Wilkins PX7 S2 too have a battery level indicator, charging indicators allow you to determine the charging state of your headphones, whether fully charged, or the battery is running low. Sennheiser Momentum 4 Wireless, the device supports a wireless charging standard such as Qi.

To charge the device, you simply put it down on a compatible charging pad. Battery power, or battery capacity, represents the amount of electrical energy that a battery can store. Sennheiser Momentum 4 Wireless's battery power is 700mAhmAh, more battery power can be an indication of longer battery life.

A rechargeable battery is a type of electrical battery that can be charged, discharged into a load, and recharged many times, as opposed to a disposable or primary battery, which is supplied fully charged and discarded after use. Sennheiser Momentum 4 Wireless's battery can be recharged and used over again. The Bowers & Wilkins PX7 S2 too have a rechargeable battery.

Sennheiser Momentum 4 Wireless can be used wirelessly, wireless devices allow you more freedom of movement. The Bowers & Wilkins PX7 S2 also can be used wirelessly Bluetooth is a wireless technology standard that allows data transfers between devices placed in close proximity, using short-wavelength, ultra-high frequency radio waves. Sennheiser Momentum 4 Wireless has a v5.2 Bowers & Wilkins PX7 S2 has a Bluetooth version of v5.2.

Newer versions provide faster data transfers. Sennheiser Momentum 4 Wireless support USB TYPE-C, an industry-standard connector for transmitting both data and power on a single cable. The USB-C plug is now part and parcel of most current laptops, phones, and tablets, it features reversible plug orientation and cable direction.

Bowers & Wilkins PX7 S2 too have USB TYPE-C Sennheiser Momentum 4 Wireless support APTX Adaptive, an audio codec for Bluetooth devices that are developed by Qualcomm. It has a variable bit rate (between 279kbps and 420kbps), which means it can adjust the bit rate for different scenarios, such as listening to HD audio or reducing interference from other devices. Bowers & Wilkins PX7 S2 support APTX Adaptive as well Sennheiser Momentum 4 Wireless support APTX, a codec used for transmitting audio wirelessly with Bluetooth.

It is developed by Qualcomm and supports 16-bit audio at a bit rate of 384kbps. Bowers & Wilkins PX7 S2 support APTX Sennheiser Momentum 4 Wireless support AAC, a codec that is used for Bluetooth audio. It supports 24-bit audio at 250kbps.

Because it uses psychoacoustic modeling, it can provide better results than other codecs at a similar bit rate. The Bowers & Wilkins PX7 S2 support AAC as well. Designed to be the successor of the MP3 format, AAC generally achieves higher sound quality than MP3 encoders at the same bit rate.

Bluetooth is a short-range wireless technology standard that is used for exchanging data between fixed and mobile devices over short distances. The Sennheiser Momentum 4 Wireless can connect at a 10meters distance via Bluetooth or infrared to another device. The Bowers & Wilkins PX7 S2 can connect at a 10meters distance via Bluetooth Sennheiser Momentum 4 Wireless have only 4 microphones, more microphones result in better sound quality and enable the device to filter out background noise.

The Bowers & Wilkins PX7 S2 microphones are only 6. Sennheiser Momentum 4 Wireless use a noise-canceling type of microphone, these microphones are designed to filter out background noise from the desired sound. Especially useful in noisy environments.

The Bowers & Wilkins PX7 S2 too use a noise-canceling type of microphone. The highest mic frequency of a microphone is defined as its upper limiting frequency. With today's microphones, you can reach a frequency high reaching up to 140 kHz.

Sennheiser Momentum 4 Wireless's highest mic frequency is 10,000Hz, the highest frequency that the mic can pick up. Better for recording treble. The lowest mic frequency of a microphone is defined as its lower limiting frequency.

With today's microphones, you can have a frequency starting from around 1Hz. Sennheiser Momentum 4 Wireless's lowest mic frequency is 50Hz, the lowest frequency that the mic can pick up. Better for recording bass.

Sennheiser Momentum 4 Wireless support ambient sound mode, which uses microphones to pass through ambient noises so that they can still be heard. It’s useful when you want to listen to music but also be aware of what’s happening around you, for example when you’re having a jog but would still want to be able to hear traffic. The Bowers & Wilkins PX7 S2 support ambient sound mode as well allowing you to hear the ambient sound even while wearing them.

Sennheiser Momentum 4 Wireless have a mute function, they have an option to mute/unmute a conversation directly from the device. The mute function means that you unilaterally turn off the microphone, but you can still hear the other party's voice. The Bowers & Wilkins PX7 S2 too have a mute function.

There is a control panel on the Sennheiser Momentum 4 Wireless body, so you can easily access the volume control or remote without having to interact with a cable or another device it's connected to. The Bowers & Wilkins PX7 S2 too have a control panel on them. Sennheiser Momentum 4 Wireless can be used as a headset.

A headset is one headphone or pair with a built-in microphone. Headsets can be used for apps that require communication i.e. Zoom, Google Meet, Skype, games with voice chat, mobile phones, etc.

Bowers & Wilkins PX7 S2 can be used as a headset. since they have a built-in microphone Carrying headphones without a case, or putting them in bags without a casing can easily put them at risk of getting damaged. The Sennheiser Momentum 4 Wireless come with their own special case or pouch, which is useful for safe transportation.

Bowers & Wilkins PX7 S2 too have a travel bag or case included.

kinsta kinsta