Overall Score 6.4 Represents average audio ecosystem compatibility score.
Overall Score 6.4 Represents average audio ecosystem compatibility score.
Category | Features | Sennheiser Momentum True Wireless 3 | JEET W1S |
---|---|---|---|
DESIGN | ingress protection (ip) rating | IPX4 | IPX5 |
weight | 140g | 18g | |
has no wires or cables | ✓ | ✗ | |
wingtips included | ✗ | ✓ | |
sweat resistance | ✓ | ✓ | |
has stereo speakers | ✓ | ✓ | |
SOUND QUALITY | has active noise cancellation (noise control) | ✓ | ✗ |
has passive noise reduction | ✓ | ✓ | |
driver unit size | 7mm | 11mm | |
lowest frequency | 5Hz | 20Hz | |
highest frequency | 21000Hz | 20000Hz | |
sound pressure level | 107dB/mW | 93dB/mW | |
POWER | battery life | 7hours | 11hours |
battery life of charging case | 21hours | ✗ | |
charge time | 1.5hours | ✗ | |
has wireless charging | ✓ | ✗ | |
has a battery level indicator | ✓ | ✓ | |
CONNECTIVITY | has usb type-c | ✓ | ✗ |
bluetooth version | v5.2 | v4.1 | |
maximum bluetooth range | 10meters | 10meters | |
has aac | ✓ | ✓ | |
has ldac | ✗ | ✓ | |
has aptx adaptive | ✓ | ✓ | |
has aptx low latency | ✗ | ✓ | |
has aptx hd | ✗ | ✓ | |
audio latency | ✗ | 88ms | |
MICROPHONE | number of microphones | 6only | 1only |
has a noise-canceling microphone | ✓ | ✗ | |
EXTRAS | has ambient sound mode | ✓ | ✓ |
has in/on-ear detection | ✓ | ✓ | |
has find earbuds feature | ✗ | ✓ | |
supports fast charging | ✓ | ✓ | |
has a mute function | ✓ | ✓ | |
control panel placed on a device | ✓ | ✓ | |
warranty period | ✗ | 1Years | |
has voice prompts | ✓ | ✓ | |
travel bag is included | ✓ | ✓ | |
See price on Amazon | See price on Amazon |
IP ratings refer to the rating of protection given by a casing, against solids and liquids. In the format of IPXX, 'X' represents a number The first value of the IP rating refers to protection against solids such as dust, while the second refers to protection against liquids (water).
Having a value of IPX4, the Sennheiser Momentum True Wireless 3's rating is read as, the first number of X denotes that no data available to specify a protection rating, and the second value of 4 means that they can withstand low pressure spray similar to that of a shower head when tilted at 180° for 10 minutes.
In comparison to the Sennheiser Momentum True Wireless 3, JEET W1S have a rating of IPX5 meaning that
we are not yet certain of their rating with solids (dust)
and that of liquids is that,
Sennheiser Momentum True Wireless 3 has a lower liquid rating than JEET W1S
Sennheiser Momentum True Wireless 3 have a weight of 140g . We consider a lower weight better for the reason that lighter devices are easier to move with.
JEET W1S, at 18g
weigh less than the Sennheiser Momentum True Wireless 3 by -122g
For a device to be true wireless it must have no cables connecting any part of the device together, Sennheiser Momentum True Wireless 3 are true wireless for this matter since they don't have cables. This is an important distinction as some wireless earbuds have cables connecting the two earbuds .
The JEET W1S come with wingtips, these are reserved for workout earbuds and come as an optional add-on to the separate silicone ear tip for a more secure fit.
Sennheiser Momentum True Wireless 3 are resistant to sweat
JEET W1S's resistance to sweat makes both devices fit for use while doing sports such as long-distance running, marathons, cardio sweat workouts , etc
Sennheiser Momentum True Wireless 3 have stereo speakers, devices with stereo speakers deliver sound from independent channels on both left and right sides, this creates a richer sound and a better listening experience.
The JEET W1S also have stereo speakers
ANC uses advanced technology to reduce ambient sounds. ANC works when, it detects and analyzes the sound pattern of incoming noise and then generates a mirror signal to counter it. Simply put, it's like having +1 (noise) then producing -1 (inverted noise) giving zero resulting in a reduced level of noise.
Sennheiser Momentum True Wireless 3 have Active Noise Cancellation enabling you to listen at lower levels of volume, good for your ears since you don't have to crank up the device volume to outcompete background sounds.
The Sennheiser Momentum True Wireless 3 stay well in place, this creates a sound covering that reduces your environment noise and also prevents the earbuds music from leaking out at the same.
Both JEET W1S, and Sennheiser Momentum True Wireless 3 have passive noise reduction which means that both reduce ambient noise without using technology to cancel it out.
The Sennheiser Momentum True Wireless 3 driver unit is 7mm in diameter, the bigger the unit the more powerful, therefor producing better bass.
A driver unit is basically a mini speaker that makes sound in the device, its size determines the loudness of the earbuds.
JEET W1S driver unit is 11mm in diameter,
making them have a larger driver unit than that of Sennheiser Momentum True Wireless 3 by 4mm
, many people have a misconception that driver units of a bigger size automatically produce better sound quality.
However, large drivers usually have difficulty producing high frequencies so yeah, larger drivers are capable of generating louder sound, but this does not imply that they produce better quality sound.
The Sennheiser Momentum True Wireless 3's lowest frequency is at 5Hz, low-frequency response inidcates how well an audio device generates low frequencies that can be heard, and if it alters the signal while at it.
JEET W1S's lowest frequency is at 20Hz, this implies that
Sennheiser Momentum True Wireless 3 produce a juicier bass than the JEET W1S
The Sennheiser Momentum True Wireless 3's highest frequency is at 21000Hz, high-frequency response indicates how well a particular audio component generates high human frequencies and if it adjustments to the signal while at it.
JEET W1S's highest frequency is at 20000Hz, this means that
Sennheiser Momentum True Wireless 3 produce a clearer and crispier treble than the JEET W1S
The sound pressure level, is the pressure level of sound, measured in decibels, dB, Sennheiser Momentum True Wireless 3's measurement is 107dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source.
JEET W1S's sound pressure level measurement is 93dB/mW. The sound pressure level, something is can be taken differently by separate persons, so we need to have the means to get an objective measurement of sound level expressed in numerical terms.
Sennheiser Momentum True Wireless 3's battery life is 7 hours, a device's battery life is commonly given by the manufacturer, and with more battery hours, you get to use it for longer and requires fewer chanrgings.
JEET W1S's battery life is
more than that of Sennheiser Momentum True Wireless 3 by 4 hours
. Every time you recharge your earbuds, they get a little less playing time. The effect is not noticeable at first, but over a few years, your wireless earbuds will no longer play for long like they used to.
The battery life of the charging case is given by the manufacturer, and Sennheiser Momentum True Wireless 3's case is said to have a full charge of 21 hours. A charging case with a longer battery life enables you to recharge your earbuds on the go many times before having to recharge the case itself.
It takes 1.5 hours to fully charge the Sennheiser Momentum True Wireless 3's battery. It is highly adivsable to fully charge the battery before using the earbuds for the first time.
The Sennheiser Momentum True Wireless 3, the device supports wireless charging. To charge the earbuds, you just place down on a supported charging pad.
Sennheiser Momentum True Wireless 3 have a battery level indicator, an indicator shows you when the earbuds has a low battery. The battery indicator lights display the charging status of your earbuds and case.
JEET W1S too have a battery level indicator, charging indicators allow you to tell the charging state of your earbuds, whether fully charged, or the battery is running low.
The Sennheiser Momentum True Wireless 3 use USB TYPE-C, a standard connector for transmitting both data and power in a single cable.
Sennheiser Momentum True Wireless 3 have Bluetooth version of 5.2, Bluetooth is a wireless technology standard that enables data transfers between devices placed in close proximity, using short-wavelength, ultra-high frequency radio waves.
JEET W1S has a Bluetooth version of 4.1,
older than that of Sennheiser Momentum True Wireless 3
. Newer versions provide faster data transfers.
The Sennheiser Momentum True Wireless 3 have a 10meters distance connecting via Bluetooth.
JEET W1S have a maximum range of 10meters,
equal to that of the Sennheiser Momentum True Wireless 3
Sennheiser Momentum True Wireless 3 support AAC, a codec used for Bluetooth audio. It supports 24-bit audio at 250kbps. Since it uses psychoacoustic modeling, it can provide better results than other codecs at a similar bit rate.
Since its the highest quality codec that any Bluetooth-supporting Apple product supports, the Sennheiser Momentum True Wireless 3 will work fine with your iPad. If you intend on using these with Android you need to pay even closer attention to codec support for if they only have AAC they won't provide the best audio quality possible, ensure that they also support aptX HD, LDAC, or LHDC as well.
The JEET W1S support AAC as well. Designed to be the successor of the MP3 format, AAC generally achieves higher sound quality than MP3 encoders at the same bit rate.
The JEET W1S support LDAC, a codec developed by Sony which allows streaming high-resolution audio over Bluetooth connections at up to 990 kbps at 32 bit/96 kHz. It can reach a high bitrate of 990kbps, which provides high-resolution audio.
Sennheiser Momentum True Wireless 3 support APTX Adaptive, an audio codec for Bluetooth devices that are developed by Qualcomm. It has a variable bit rate (between 279kbps and 420kbps).
JEET W1S support APTX Adaptive as well which means both can adjust the bit rate for different scenarios, such as reducing interference from other devices.
JEET W1S support APTX Low Latency, a codec developed by Qualcomm. It uses Bluetooth 5.0 technology to provide low latency audio (around 40ms), which is useful when you want to avoid audio lag for example when playing games.
The JEET W1S support APTX HD, an audio codec for Bluetooth devices that are developed by Qualcomm. It supports high-quality 24-bit audio (at a bit rate of 576kbps).
Latency refers to the time it takes for the audio signal to be transmitted to your earbuds. JEET W1S have a latency of 88ms, a lower latency reduces audio lag and is particularly important when playing games or watching videos.
Sennheiser Momentum True Wireless 3 have 6 microphones.
JEET W1S microphones are 1,
less than that of Sennheiser Momentum True Wireless 3 by 5
. More microphones result in better sound quality and help the earbuds to filter out background sounds.
Sennheiser Momentum True Wireless 3 have a noise-canceling microphone, these microphones are designed to filter out background sounds from the desired sound.
Sennheiser Momentum True Wireless 3 support ambient sound mode, which uses microphones to pass through ambient sound so that they can still be heard even while wearing the earbuds
The JEET W1S support ambient sound mode as well, it’s useful when you want to listen to music but also be aware of what’s happening around you, say you’re having a jog but would still want to hear traffic.
The Sennheiser Momentum True Wireless 3 have in/on-ear detection, the sensors in the device can detect when they are removed from your ears so that the music is paused.
The JEET W1S too support in/on-ear detection, automatically pauses your music, or audiobook when you remove earbuds from your ears saving battery life.
When lost in a room, or can't easily find them in your bag, the JEET W1S have a find earbuds feature.
The Sennheiser Momentum True Wireless 3 support fast charging. Most often, technologies like MediaTek’s Pump Express, are used to lower the time it takes to charge the earbuds.
The JEET W1S too support fast charging. It's very similar to regular charging, just that the battery is filling up much faster. For example, with Quick Charge 3.0, the battery is charged to 50% in thirty minutes.
Sennheiser Momentum True Wireless 3 have a mute function, they support the option to mute/unmute a conversation directly from the earbuds.
The JEET W1S also support the mute function. It means that you are in position turn off the earbuds' microphone, but still hear the other party's voice.
The Sennheiser Momentum True Wireless 3, so you can easily access the volume control, pause, play, mute, etc whichever features are supported on the earbuds.
JEET W1S too have a control panel on them.
JEET W1S have a warranty period of 1 Years, the period of time that warrant free repair and adjustment services in case of a malfunction occurring under normal use that has followed instruction manuals.
The Sennheiser Momentum True Wireless 3 support voice prompts. Automatically receive information via audio messages, like if there is a problem with the connection.
The JEET W1S also support voice prompts .i.e the device notifies you if the battery is running low, and it's time to recharge the earbuds.
Sennheiser Momentum True Wireless 3 come with a special pouch. Carrying earphones without a case, or putting them in your bag without a casing can easily damage them.
JEET W1S also have a case included, which is useful for safe transportation.