JBL Tour ONE M2See price on Amazon
Overall Score 7.4 Represents average audio ecosystem compatibility score.
Shure Aonic 50 Gen 2See price on Amazon
Overall Score 6.8 Represents average audio ecosystem compatibility score.
|Category||Features||JBL Tour ONE M2||Shure Aonic 50 Gen 2|
|has a detachable cable||✓||✓|
|ingress protection (ip) rating||IPX4||✗|
|can be folded||✓||✗|
|has a tangle free cable||✓||✓|
|has an over-the-ear foam||✓||✓|
|has stereo speakers||✓||✓|
|SOUND QUALITY||has active noise cancellation (anc)||✓||✓|
|has passive noise reduction||✓||✓|
|sound pressure level||95dB/mW||✗|
|driver unit size||40mm||50mm|
|has a battery level indicator||✓||✓|
|has a rechargeable battery||✓||✓|
|CONNECTIVITY||can be used wirelessly||✓||✓|
|uses 2.4ghz wireless||✗||✓|
|has usb type-c||✓||✓|
|has aptx adaptive||✓||✓|
|has aptx hd||✗||✓|
|has bluetooth aptx||✓||✓|
|maximum bluetooth range||10meters||100meters|
|has a 3.5mm male connector||✓||✓|
|MICROPHONE||number of microphones||6only||6only|
|has a noise-canceling microphone||✓||✓|
|EXTRAS||has ambient sound mode||✓||✓|
|has in/on-ear detection||✓||✗|
|has a mute function||✓||✓|
|control panel placed on a device||✓||✓|
|can be used as a headset||✓||✓|
|travel bag is included||✓||✓|
|See price on Amazon||See price on Amazon|
Shure Aonic 50 Gen 2 have a weight of 334g, these are higher than 320g, which we consider as the highest average a headphone should weigh for comfort during long use.
We prefer a lower weight best because lighter devices are more comfortable to move with.
The JBL Tour ONE M2, at 268g are lighter than the Shure Aonic 50 Gen 2 with a difference -66g
Detachable cables are cables that have connectors on both ends. One end goes into your headphone earpieces, while the other end is inserted into an audio source. Some new headphones, and not just the expensive ones, are coming with detachable cables, Shure Aonic 50 Gen 2 are one of those.
With a detachable cable, JBL Tour ONE M2 too can use alternative cables and if the cable is pulled, it will pop out instead of breaking.
Ingress protection ratings refer to the level of protection offered by an electrical enclosure, against solids and liquids. The letters 'IP' are followed by two numerals The first number of the IP rating refers to protection against solids say dust, while the second refers to protection against liquid.
Having a value of IPX4, the JBL Tour ONE M2's rating is read as, the first value of X denotes that no data available to specify a protection rating, and the second value of 4 means that they can withstand low pressure spray similar to that of a shower head when tilted at 180° for 10 minutes.
JBL Tour ONE M2 are foldable, which makes them more portable. Foldable headphones are easier to transport and take up less storage space.
Twisted headphone cables can be a great source of annoyance and inconvenience, Shure Aonic 50 Gen 2's cable is designed to minimize tangling. Constant twisting of the cables can also lead to bends in the copper wires, affecting sound quality, or
rendering your headphones defective.
JBL Tour ONE M2 too have a cable designed to help prevent tangles.
By sweat resistance we mean that the wireless earbuds are protected in the presence of low-pressure water jets at any angle, this is determined by the IP Rating of the earbuds. Based on the ingress protection rating of the Shure Aonic 50 Gen 2 they do have sweat resistance
JBL Tour ONE M2's resistance to sweat makes both devices ideal for use while doing sports such as long-distance running, marathons, training in workout bodysuits,
A long cable ensures more freedom of movement, but remember that every cable based on the conducting material used has a certain amount of parasitic resistance, inductance, and capacitance. How much depends on the length and construction. Shure Aonic 50 Gen 2 comes with a 1.5meters cable.
JBL Tour ONE M2 comes with a 1.2meters cable. Almost any cable should be fine in sound quality If you're looking at lengths up to 2 - 3 meters.
Over-ear headphones have larger earpads that fit around your entire ear Shure Aonic 50 Gen 2 have a comfortable full-size form with earcups that fully enclose your ears. This design is loved for its increased sound isolation and the fact that it won't leak sound to your neighbors.
JBL Tour ONE M2 with this design offer potential for maximum bass and loudness levels.
Shure Aonic 50 Gen 2 have stereo speakers, devices with stereo speakers deliver sound from separate channels on both left and right sides, creating a richer sound and a better listening experience.
Both JBL Tour ONE M2 and Shure Aonic 50 Gen 2 have stereo speakers
Active noise cancellation uses more advanced technology to actively counter noise. How it works, it listens to the sound pattern outside and inside the earbud and then generates a mirror signal to cancel it out. In simple terms, it's like taking +1 outside (noise from your surrounding) and adding -1 inside (counter sound within the device) to make 0 hence "diluting" the noise.
Shure Aonic 50 Gen 2 allow you to listen at lower volume levels, causing less ear fatigue as you don't have to crank up the volume to overcome background noise.
JBL Tour ONE M2 too have active noise cancellation making both devices ideal for plane rides and morning commutes. Each may work with different noise cancellation modes, pick the setting, mode, or noise cancellation type that suits your commute or that enhances your relaxation time.
Passive Noise Cancellation uses well-designed ear cups to seal out environment noise. This is used for both in-ear earphones and over-ear headphones where the headphone itself will keep surrounding noise out.
The Shure Aonic 50 Gen 2 sits tightly in place, creating an acoustic seal that reduces background noise and prevents your music from leaking out.
Both of these devices have passive noise reduction which means that also the JBL Tour ONE M2 isolates you from ambient noise instead of actively using technology to cancel it out.
Low-frequency response measures if and how well a particular audio device reproduces low audible frequencies and if it makes any changes to the signal while at it. Shure Aonic 50 Gen 2's lowest frequency is at 20Hz, the lower the low-frequency response, the stronger and juicier the bass.
JBL Tour ONE M2's lowest frequency is at 10Hz, this means that Shure Aonic 50 Gen 2 got a juicier bass than the JBL Tour ONE M2
High frequency response measures if and how well an audio component reproduces high audible frequencies and if it changes to the signal on the way through. Shure Aonic 50 Gen 2's highest frequency is at 22000Hz, the higher the high-frequency response, the clearer and crispier the treble.
JBL Tour ONE M2's highest frequency is at 40000Hz, this implies that JBL Tour ONE M2 got a clearer and crispier treble than the Shure Aonic 50 Gen 2
Sound pressure is the average variation in atmospheric pressure caused by the sound, the sound level .i.e how loud something is can be perceived differently by different people so we need to have a way of getting an objective measurement of sound level expressed in numerical terms.
The sound pressure level, SPL, is the pressure level of a sound, measured in decibels, dB, JBL Tour ONE M2's measurement is 95dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source.
The driver unit is basically a mini speaker that produces sound in the device, its size dictates the loudness of the headphone. Shure Aonic 50 Gen 2 driver unit is 50mm in diameter, bigger drivers are more powerful and can produce better bass.
JBL Tour ONE M2 driver unit is 40mm in diameter, which means that they have a smaller driver unit than that of Shure Aonic 50 Gen 2 by 10mm , as many tend to believe that driver units of a bigger size automatically produce better sound quality.
However, large drivers usually have difficulty reproducing high frequencies so yes, larger drivers are capable of generating louder sound, but this does not mean that they deliver better sound.
Impedance is the device's resistance to the electromagnetic current, when electricity flows through a conductor, it faces electrical resistance that counters the flow of current. The resistance of a conductor is measured in ohms. JBL Tour ONE M2's impedance is 32Ohms, the lower the impedance, the easier it is to get higher volume and requires less power.
If your headphones play wirelessly, cancel ambient noise, or enhance your listening experience with active features, their battery life will reduce over time. The device's battery life is given by the manufacturer, with longer battery life, you get to use it for longer and have to charge the device less often. Shure Aonic 50 Gen 2's battery life is 45 hours
JBL Tour ONE M2's battery life is 50 hours. Each time you recharge your headphones, they get a little less listening time. The effect is barely noticeable at first. But over a few years, you may find that your device, no longer plays for long like it used to.
It takes 3 hours to fully charge the Shure Aonic 50 Gen 2's battery. It is recommended to fully charge the battery before using the headphones for the first time or when they have been unused for extended periods.
JBL Tour ONE M2 takes 2 hours to fully charge the battery
Shure Aonic 50 Gen 2 have a battery level indicator, an indicator shows you when the device has a low battery. The battery indicator lights indicate the charging status of your headphones.
JBL Tour ONE M2 too have a battery level indicator, charging indicators allow you to determine the charging state of your headphones, whether fully charged, or the battery is running low.
Battery power, or battery capacity, represents the amount of electrical energy that a battery can store. JBL Tour ONE M2's battery power is 750mAh, more battery power can be an indication of longer battery life.
A rechargeable battery is a type of electrical battery that can be charged, discharged into a load, and recharged many times, as opposed to a disposable or primary battery, which is supplied fully charged and discarded after use.
Shure Aonic 50 Gen 2's battery can be recharged and used over again.
The JBL Tour ONE M2 too have a rechargeable battery.
2.4GHz wireless is used for devices such as headsets such as the Shure Aonic 50 Gen 2, keyboards, and mice similar to Bluetooth but with a proprietary radio frequency. It typically offers better performance than Bluetooth, with low latency and good stability.
Bluetooth is a wireless technology standard that allows data transfers between devices placed in close proximity, using short-wavelength, ultra-high frequency radio waves. Shure Aonic 50 Gen 2 has a v5
JBL Tour ONE M2 has a Bluetooth version of v5.3. Newer versions provide faster data transfers.
Shure Aonic 50 Gen 2 support USB TYPE-C, an industry-standard connector for transmitting both data and power on a single cable. The USB-C plug is now part and parcel of most current laptops, phones, and tablets, it features reversible plug orientation and cable direction.
JBL Tour ONE M2 too have USB TYPE-C
Shure Aonic 50 Gen 2 support LDAC, a codec developed by Sony
which allows streaming high-resolution audio over Bluetooth connections at up to 990 kbps at 32 bit/96 kHz.
It is capable of a very high bitrate of 990kbps, which provides high-resolution audio.
JBL Tour ONE M2 support it as well, LDAC, can automatically adjust to a lower bitrate of 330kbps or 660kbps to increase stability.
Shure Aonic 50 Gen 2 support APTX Adaptive, an audio codec for Bluetooth devices that are developed by Qualcomm. It has a variable bit rate (between 279kbps and 420kbps), which means it can adjust the bit rate for different scenarios, such as listening to HD audio or reducing interference from other devices.
JBL Tour ONE M2 support APTX Adaptive as well
The Shure Aonic 50 Gen 2 support APTX HD, an audio codec for Bluetooth devices that are developed by Qualcomm. It supports high-quality 24-bit audio (at a bit rate of 576kbps).
Shure Aonic 50 Gen 2 support APTX, a codec used for transmitting audio wirelessly with Bluetooth. It is developed by Qualcomm and supports 16-bit audio at a bit rate of 384kbps.
JBL Tour ONE M2 support APTX
Shure Aonic 50 Gen 2 support AAC, a codec that is used for Bluetooth audio. It supports 24-bit audio at 250kbps. Because it uses psychoacoustic modeling, it can provide better results than other codecs at a similar bit rate.
The JBL Tour ONE M2 support AAC as well. Designed to be the successor of the MP3 format, AAC generally achieves higher sound quality than MP3 encoders at the same bit rate.
Bluetooth is a short-range wireless technology standard that is used for exchanging data between fixed and mobile devices over short distances. The Shure Aonic 50 Gen 2 can connect at a 100meters distance via Bluetooth or infrared to another device.
The JBL Tour ONE M2 can connect at a 10meters distance via Bluetooth
Being an industry standard audio plug, a standard 3.5mm male connector is suitable for use with all MP3 players and computer sound cards. This means that it is commonly used in stereo headphones to your phone or connecting your phone to an external amplifier, sound bars, your car radio, etc.
Shure Aonic 50 Gen 2 has this connector giving it a wider range of connectivity with most of the sound devices out there. All plugs have at least a tip and sleeve with the number of rings that stand as a differentiating factor.
JBL Tour ONE M2 too have this kind of connector
Shure Aonic 50 Gen 2 have only 6 microphones, more microphones result in better sound quality and enable the device to filter out background noise.
The JBL Tour ONE M2 microphones are only 6.
Shure Aonic 50 Gen 2 use a noise-canceling type of microphone, these microphones are designed to filter out background noise from the desired sound. Especially useful in noisy environments.
The JBL Tour ONE M2 too use a noise-canceling type of microphone.
Shure Aonic 50 Gen 2 support ambient sound mode, which uses microphones to pass through ambient noises so that they can still be heard. It’s useful when you want to listen to music but also be aware of what’s happening around you, for example when you’re having a jog but would still want to be able to hear traffic.
The JBL Tour ONE M2 support ambient sound mode as well allowing you to hear the ambient sound even while wearing them.
JBL Tour ONE M2 support in/on-ear detection, the sensors in the device can detect when they are removed from your ears so that the music is paused, saving battery life and improving your listening experience while at it.
Shure Aonic 50 Gen 2 have a mute function, they have an option to mute/unmute a conversation directly from the device. The mute function means that you unilaterally turn off the microphone, but you can still hear the other party's voice.
The JBL Tour ONE M2 too have a mute function.
Shure Aonic 50 Gen 2 support multipoint, which allows you to link to more Bluetooth devices and switch between them. For example, you can easily switch calls from one device to another without having to manually disconnect and reconnect.
The JBL Tour ONE M2 support multipoint count. Bluetooth multipoint would come in handy because you can be on one call without missing notifications coming from another device.
There is a control panel on the Shure Aonic 50 Gen 2 body, so you can easily access the volume control or remote without having to interact with a cable or another device it's connected to.
The JBL Tour ONE M2 too have a control panel on them.
Shure Aonic 50 Gen 2 can be used as a headset.
A headset is one headphone or pair with a built-in microphone. Headsets can be used for apps that require communication i.e. Zoom, Google Meet, Skype, games with voice chat, mobile phones, etc.
JBL Tour ONE M2 can be used as a headset. since they have a built-in microphone
The period of time that warrant free repair and adjustment services in case of a malfunction occurring under normal use that has followed instruction manuals. When covered under the manufacturer’s warranty it is possible to get a replacement in the case of a malfunction. Shure Aonic 50 Gen 2 have a warranty period of 1 years
Carrying headphones without a case, or putting them in bags without a casing can easily put them at risk of getting damaged. The Shure Aonic 50 Gen 2 come with their own special case or pouch, which is useful for safe transportation.
JBL Tour ONE M2 too have a travel bag or case included.