Overall Score 6.4 Represents average audio ecosystem compatibility score.
Overall Score 5.3 Represents average audio ecosystem compatibility score.
Category | Features | JEET W1S | Sony WF C500 |
---|---|---|---|
DESIGN | ingress protection (ip) rating | IPX5 | IPX4 |
weight | 18g | 10.8g | |
has no wires or cables | ✗ | ✓ | |
wingtips included | ✓ | ✗ | |
sweat resistance | ✓ | ✓ | |
has stereo speakers | ✓ | ✓ | |
SOUND QUALITY | has passive noise reduction | ✓ | ✓ |
driver unit size | 11mm | 5.8mm | |
lowest frequency | 20Hz | 20Hz | |
highest frequency | 20000Hz | 20000Hz | |
sound pressure level | 93dB/mW | ✗ | |
has a neodymium magnet | ✗ | ✓ | |
POWER | battery life | 11hours | 10hours |
battery life of charging case | ✗ | 10hours | |
charge time | ✗ | 2.5hours | |
has a battery level indicator | ✓ | ✓ | |
CONNECTIVITY | has usb type-c | ✗ | ✓ |
bluetooth version | v4.1 | v5 | |
maximum bluetooth range | 10meters | 9meters | |
has aac | ✓ | ✓ | |
has ldac | ✓ | ✗ | |
has aptx adaptive | ✓ | ✗ | |
has aptx low latency | ✓ | ✗ | |
has aptx hd | ✓ | ✗ | |
audio latency | 88ms | ✗ | |
MICROPHONE | number of microphones | 1only | 2only |
EXTRAS | has ambient sound mode | ✓ | ✗ |
has in/on-ear detection | ✓ | ✗ | |
has find earbuds feature | ✓ | ✗ | |
supports fast charging | ✓ | ✓ | |
has a mute function | ✓ | ✓ | |
control panel placed on a device | ✓ | ✓ | |
warranty period | 1Years | 1Years | |
has voice prompts | ✓ | ✓ | |
travel bag is included | ✓ | ✓ | |
See price on Amazon | See price on Amazon |
Ingress protection ratings refer to the rating of protection given by an enclosure, against solids and liquids. The letters 'IP' are followed by two values The first value of the IP rating means protection against solids such as dust, followed by the one that refers to resistance against liquids (water).
Scoring IPX4, the Sony WF C500's rating is read as, the first value of X denotes that no data available to specify a protection rating, and of liquids that they can withstand low pressure spray similar to that of a shower head when tilted at 180° for 10 minutes.
In comparison to the Sony WF C500, JEET W1S have a rating of IPX5 meaning that
we are not yet certain of their rating with solids (dust)
and that of liquids is that,
Sony WF C500 has a lower liquid rating than JEET W1S
The Sony WF C500 have a weight of 10.8g . We prefer a lower weight best for the reason that lighter devices are easier to transport.
JEET W1S, at 18g
are heavier than the Sony WF C500 by of 7.2g
True wireless devices have no cables linking any part of the device together, Sony WF C500 are true wireless for this matter since they have no wires. This is a major difference since wireless earbuds have wires linking the 2 earbuds together.
The JEET W1S come with wingtips, these are commonly used for workout earbuds and are usually an optional add-on to the separate silicone ear tip for a better fit.
Sony WF C500 are resistant to sweat
JEET W1S's resistance to sweat makes both devices ideal for use during long-distance running, marathons, cardio sweat workouts , etc
Sony WF C500 have stereo speakers, what this means is that Sony WF C500's speakers deliver sound from separate channels on both left and right sides, this creates a richer sound and a better listening experience.
The JEET W1S also have stereo speakers
Sony WF C500 sit well in place, creating a sound seal that tones down background sounds and also prevents the earbuds sound from leaking out at the same.
Both JEET W1S, and Sony WF C500 have passive noise reduction which implies that they limit ambient noise without using ANC to cancel it out.
The Sony WF C500 have a unit size of 5.8mm in diameter, bigger drivers are more powerful, and can produce better bass.
The driver unit is the component that makes sound in the earbuds, the unit size corellates with the sound produced by the earbuds.
JEET W1S driver unit is 11mm in diameter,
making them have a larger driver unit than that of Sony WF C500 by 5.2mm
, a common assumption that driver units of a bigger size automatically produce better sound quality.
However, large drivers usually have difficulty producing high frequencies so yeah, larger drivers are capable of generating louder sound, but this does not imply that they produce better quality sound.
The Sony WF C500's lowest frequency is at 20Hz, low-frequency response measures if and how well a particular audio device produces low frequencies that can be heard, and if it alters the signal on its way through.
JEET W1S's lowest frequency is at 20Hz, this implies that
both devices can produce equal bass
Sony WF C500's highest frequency is at 20000Hz, high-frequency response tells how well a particular audio component produces high recognizable frequencies and if it changes to the signal while at it.
JEET W1S's highest frequency is at 20000Hz, this implies that
both devices generate equal treble
The sound pressure level, is the level of pressure of sound, measured in decibels, dB, JEET W1S's measurement is 93dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source.
Sony WF C500 have neodymium magnets, if used in earbuds produce a higher sensitivity and substantial sound output while using less power. They can help produce music at quite a high SPL, using high magnetic flux.
The Sony WF C500's battery life is 10 hours, these last longer than 5 hours of listening which is considered average for a single charge. A device's battery life is commonly given by the manufacturer, and with longer battery life, you get to use it for longer and requires fewer chargings.
JEET W1S's battery life is
more than that of Sony WF C500 by 1 hours
. Every time you recharge your earbuds, they get a little less listening time. The effect is barely noticeable at first, but over a few years, your wireless earbuds will no longer play for long like they used to.
The battery life of the charging case is given by the manufacturer, and Sony WF C500's case is said to have a charge of 10 hours. A charging case with more battery hours enables you to recharge your earbuds on the go several times before having to recharge the case itself.
It takes 2.5 hours to fully charge the Sony WF C500's battery. It is recommended to fully charge the battery before using the earbuds for the first time.
Sony WF C500 have a battery level indicator, an indicator notifies you when the device has a low battery. The battery indicator lights show the charging status of your earbuds and case.
JEET W1S too have a battery level indicator, charging indicators allow you to determine the charging state of your earbuds, if charged fully, or having a low battery.
The Sony WF C500 have USB TYPE-C, an industry-standard connector for transmitting both data and power in a single cable.
Sony WF C500 have Bluetooth version of 5, Bluetooth is a wireless technology standard that allows data transfers between devices placed in close proximity, using short-wavelength, ultra-high frequency radio waves.
JEET W1S has a Bluetooth version of 4.1,
older than that of Sony WF C500
. Newer versions provide faster data transfers.
Sony WF C500 have a 9meters distance connecting via Bluetooth.
JEET W1S have a maximum range of 10meters,
longer than that of Sony WF C500 by 1meters
Sony WF C500 support AAC, a codec used for Bluetooth audio. It supports 24-bit audio at 250kbps. Since it uses psychoacoustic modeling, it can provide better results than other codecs at the same bit rate.
Since its the highest quality codec that any Bluetooth-supporting Apple product supports, the Sony WF C500 will work fine with your iPad. If you are planning on using these with Android you need to pay even closer attention to codec support for if they only have AAC they won't provide the best audio quality possible, ensure that they also support aptX HD, LDAC, or LHDC as well.
The JEET W1S support AAC as well. Designed to be the successor of the MP3 format, AAC generally achieves higher sound quality than MP3 encoders at the same bit rate.
The JEET W1S support LDAC, a codec developed by Sony which allows streaming high-resolution audio over Bluetooth connections at up to 990 kbps at 32 bit/96 kHz. It can reach a high bitrate of 990kbps, providing high-resolution audio.
JEET W1S support APTX Adaptive, an audio codec for Bluetooth devices that are developed by Qualcomm. It has a variable bit rate (between 279kbps and 420kbps).
JEET W1S support APTX Low Latency, a codec developed by Qualcomm. It uses Bluetooth 5.0 technology to provide low latency audio (around 40ms), which is useful when you want to avoid audio lag for example when playing games.
The JEET W1S support APTX HD, an audio codec for Bluetooth devices that are developed by Qualcomm. It supports high-quality 24-bit audio (at a bit rate of 576kbps).
Latency refers to the time it takes for the audio signal to be transmitted to your earbuds. JEET W1S have a latency of 88ms, a lower latency reduces audio lag and is particularly important when playing games or watching videos.
Sony WF C500 have 2 microphones.
JEET W1S microphones are 1,
less than that of Sony WF C500 by 1
. More microphones record better sound quality and enable the device to filter out background sounds.
The JEET W1S support ambient sound mode, which uses microphones to channel ambient noises to still be heard even when wearing the earbuds
The JEET W1S have in/on-ear detection, the sensors in the device can detect when they are removed from your ears .
If lost in a room, or can't easily find them in your bag, JEET W1S have a find earbuds feature.
Sony WF C500 support fast charging. Commonly, technologies like Qualcomm’s Quick Charge, are used to reduce the time it takes to charge the earbuds.
Also the JEET W1S support fast charging. It's very similar to regular charging, just that the battery fills up much faster. For example, with Quick Charge 3.0, the battery can be charged to 50% in just 30 minutes.
The Sony WF C500 have a mute function, they support the option to mute/unmute a conversation directly from the earbuds.
The JEET W1S also support the mute function. The mute function means that you unilaterally turn off the device's microphone, but you can still hear the other party's voice.
With the Sony WF C500, so you can access the volume control, pause, play, mute, etc whichever functions are supported on the device.
The JEET W1S also have a control panel on them.
The Sony WF C500 have a warranty period of 1 Years, the period of time that warrant free repair and adjustment services in case of a malfunction occurring under normal use that has followed instruction manuals.
If covered under the manufacturer’s warranty it is possible to get a replacement a malfunction occurs. JEET W1S have a warranty period of 1Years,
equal to that of the Sony WF C500
.
Sony WF C500 have voice prompts. With voice prompts, you receive information via audio messages, say if there is an issue with the connection.
JEET W1S also support voice prompts meaning the device notifies you if the battery is low, and it's time to recharge the device.
Sony WF C500 come with their own special case. Carrying earbuds openly, or placing them in your bag without a casing can easily put them at risk of getting damaged.
JEET W1S also have a case included, which offers safe transportation.