Overall Score 5.3 Represents average audio ecosystem compatibility score.
Overall Score 5.1 Represents average audio ecosystem compatibility score.
Category | Features | Sony WF C500 | Mpow Flame S |
---|---|---|---|
DESIGN | ingress protection (ip) rating | IPX4 | IPX7 |
weight | 10.8g | ✗ | |
has no wires or cables | ✓ | ✗ | |
wingtips included | ✗ | ✓ | |
sweat resistance | ✓ | ✓ | |
has stereo speakers | ✓ | ✓ | |
SOUND QUALITY | has active noise cancellation (noise control) | ✗ | ✓ |
has passive noise reduction | ✓ | ✓ | |
driver unit size | 5.8mm | ✗ | |
lowest frequency | 20Hz | ✗ | |
highest frequency | 20000Hz | ✗ | |
has a neodymium magnet | ✓ | ✗ | |
POWER | battery life | 10hours | 12hours |
battery life of charging case | 10hours | ✗ | |
charge time | 2.5hours | ✗ | |
has a battery level indicator | ✓ | ✓ | |
CONNECTIVITY | has usb type-c | ✓ | ✗ |
bluetooth version | v5 | v5 | |
maximum bluetooth range | 9meters | 10meters | |
has aac | ✓ | ✓ | |
has ldac | ✗ | ✓ | |
has aptx adaptive | ✗ | ✓ | |
has aptx low latency | ✗ | ✓ | |
has aptx hd | ✗ | ✓ | |
MICROPHONE | number of microphones | 2only | ✗ |
has a noise-canceling microphone | ✗ | ✓ | |
EXTRAS | has ambient sound mode | ✗ | ✓ |
has in/on-ear detection | ✗ | ✓ | |
has find earbuds feature | ✗ | ✓ | |
supports fast charging | ✓ | ✓ | |
has a mute function | ✓ | ✓ | |
control panel placed on a device | ✓ | ✓ | |
warranty period | 1Years | ✗ | |
has voice prompts | ✓ | ✓ | |
travel bag is included | ✓ | ✓ | |
See price on Amazon | See price on Amazon |
Ingress protection ratings is the level of protection given by an enclosure, against solids and liquids. In the format of IPXX, 'X' represents a number The first value represents protection against solids say dust, while the second refers to protection against liquids (sweat).
Having a value of IPX4, the Sony WF C500's rating for solids indicates that no data available to specify a protection rating, and the second value of 4 means that they can withstand low pressure spray similar to that of a shower head when tilted at 180° for 10 minutes.
In comparison to the Sony WF C500, Mpow Flame S have a rating of IPX7 meaning that
we are not yet certain of their rating with solids (dust)
and that of liquids is that,
Mpow Flame S has a higher liquid rating than Sony WF C500
Sony WF C500 have a weight of 10.8g . We consider a lower weight best for the reason that lighter devices are easier to move with.
True wireless devices have no wires linking any part of the device together, Sony WF C500 are true wireless for this matter since they have no cables. This is a major distinction as some wireless earbuds have cables linking the two earbuds together.
Mpow Flame S have wingtips, these are commonly used for workout earbuds and come as an optional add-on to each silicone ear tip for a better fit.
Sony WF C500 have sweat resistance
Mpow Flame S's resistance to sweat makes both devices ideal for use during long-distance running, marathons, training in workout bodysuits, etc
Sony WF C500 have stereo speakers, devices with stereo speakers deliver sound from separate channels on both left and right sides, this creates a richer sound and a better listening experience.
Both Mpow Flame S and Sony WF C500 have stereo speakers
ANC uses more advanced technology to actively counter noise. How it works, it detects and analyzes the sound pattern of incoming noise and generates a mirror signal to counter it. In simple terms, it's like having +1 (noise) then producing -1 (inverted noise) to make 0 which results in a reduced level of noise.
The Mpow Flame S have Active Noise Cancellation allowing you to listen at lower volume levels, good for your ears since you don't have to crank up the earbuds volume to outcompete background sounds.
Sony WF C500 sit well in place, this creates a sound covering that tones down background sounds well as preventing the earbuds voice audio from leaking out at the same.
Both Mpow Flame S, and Sony WF C500 have passive noise reduction this implies that both tone down ambient noise without using technology to cancel it out.
Sony WF C500 have a unit size of 5.8mm in diameter, bigger drivers are more powerful, and can produce better bass. The driver unit is basically a mini speaker that makes sound in the device, the unit size determines the sound made by the device.
Sony WF C500's lowest frequency is at 20Hz, low-frequency response measures if and how well an audio device produces low frequencies that can be heard, and if it makes any changes to the signal on its way through.
Sony WF C500's highest frequency is at 20000Hz, high-frequency response measures if and how well an audio device makes high human frequencies and if it changes to the signal while at it.
Sony WF C500 have neodymium magnets, if used in audio devices produce a higher sensitivity and substantial sound output using less power to do so. They can help generate music at quite a high sound pressure level, using high magnetic flux.
Sony WF C500's battery life is 10 hours, these last longer than 5 hours of listening which is considered average for a single charge. A device's battery life is given by the manufacturer, and with longer battery life, you get to use it for longer and have to charge the device less often.
Mpow Flame S's battery life is
more than that of Sony WF C500 by 2 hours
. Every time you recharge your earbuds, they get a little less listening time. The effect is not noticeable at first, but over time, your wireless earbuds will no longer play for long like they used to.
This is given by the vendor, and the Sony WF C500's case is said to have a full charge of 10 hours. A charging case with a longer battery life enables you to recharge your earbuds on the go multiple times before having to recharge the case itself.
It takes 2.5 hours to fully charge the Sony WF C500's battery. It is highly adivsable to charge fully the battery before using the earbuds for the first time.
The Sony WF C500 have a battery level indicator, an indicator shows you when the earbuds has a low battery. The battery indicator lights show the charging status of your earbuds and case.
Mpow Flame S too have a battery level indicator, these enable you tell the charging state of your earbuds, whether fully charged, or the battery is running low.
Sony WF C500 use USB TYPE-C, an industry-standard connector for transmitting both data and power in a single cable.
Sony WF C500 have Bluetooth version of 5, Bluetooth is a wireless technology standard that enables data transfers between devices placed in close proximity, using short-wavelength, ultra-high frequency radio waves.
Mpow Flame S has a Bluetooth version of 5,
equal to that of the Sony WF C500
. Newer versions provide faster data transfers.
Sony WF C500 have a 9meters distance to connect via Bluetooth.
Mpow Flame S have a maximum range of 10meters,
longer than that of Sony WF C500 by 1meters
Sony WF C500 support AAC, a codec used for Bluetooth audio. It supports 24-bit audio at 250kbps. Because it uses psychoacoustic modeling, it provides better results than other codecs at the same bit rate.
Since its the highest quality codec that any Bluetooth-supporting Apple product supports, the Sony WF C500 will work fine with your iPad. If you intend on using these with Android you need to pay even closer attention to codec support for if they only have AAC they won't provide the best audio quality possible, ensure that they also support aptX HD, LDAC, or LHDC as well.
The Mpow Flame S support AAC as well. Designed to be the successor of the MP3 format, AAC generally achieves higher sound quality than MP3 encoders at the same bit rate.
The Mpow Flame S support LDAC, a codec developed by Sony which allows streaming high-resolution audio over Bluetooth connections at up to 990 kbps at 32 bit/96 kHz. It is capable of a very high bitrate of 990kbps, which provides high-resolution audio.
The Mpow Flame S support APTX Adaptive, an audio codec for Bluetooth devices that are developed by Qualcomm. It has a variable bit rate (between 279kbps and 420kbps).
Mpow Flame S support APTX Low Latency, a codec developed by Qualcomm. It uses Bluetooth 5.0 technology to provide low latency audio (around 40ms), which is useful when you want to avoid audio lag for example when playing games.
The Mpow Flame S support APTX HD, an audio codec for Bluetooth devices that are developed by Qualcomm. It supports high-quality 24-bit audio (at a bit rate of 576kbps).
The Mpow Flame S have a noise-canceling type of microphone, these microphones are intended to filter out noise from the desired sound.
Mpow Flame S support ambient sound mode, which uses microphones to channel ambient noises so that they can still be heard even when wearing them
The Mpow Flame S support in/on-ear detection, the sensors in the earbuds can detect when they are removed from your ears .
When misplaced in a room, or can't easily find them in your bag, Mpow Flame S have a find earbuds feature.
Sony WF C500 support fast charging. Usually, technologies like MediaTek’s Pump Express, are used to lower the time it takes to charge the earbuds.
The Mpow Flame S too support fast charging. This kind is similar to regular charging, only that the battery fills up much faster. Say, with Quick Charge 3.0, the battery is charged to 50% in thirty minutes.
The Sony WF C500 have a mute function, they support the option to mute/unmute a conversation directly from the device.
The Mpow Flame S too have the mute function. It means that you can turn off the device's microphone, but still hear the other party talk.
With the Sony WF C500, so you can easily access the volume control, pause, play, mute, etc whichever features are supported on the earbuds.
The Mpow Flame S too have a control panel on them.
Sony WF C500 have a warranty period of 1 Years, the period of time that warrant free repair and adjustment services in case of a malfunction occurring under normal use following instruction manuals.
The Sony WF C500 have voice prompts. Automatically receive information via audio messages, say if there is an issue with the connection.
The Mpow Flame S too have voice prompts .i.e the earbuds will notify you if the battery is running low, and you need to recharge the earbuds.
Sony WF C500 come with their own special pouch. Carrying earphones without a case, or placing them inside your pockets without a cover may easily put them at risk of getting damaged.
Mpow Flame S too have a travel bag included, which is useful for safe transportation.