Overall Score 7.2 Represents average audio ecosystem compatibility score.
Overall Score 5.7 Represents average audio ecosystem compatibility score.
Category | Features | Anker Soundcore Liberty 3 Pro | Soundpeats Air 3 Deluxe HS |
---|---|---|---|
DESIGN | ingress protection (ip) rating | IPX4 | IPX4 |
weight | 12g | 8.12g | |
has no wires or cables | ✓ | ✓ | |
wingtips included | ✓ | ✗ | |
sweat resistance | ✓ | ✓ | |
has an earbud foam | ✗ | ✓ | |
has stereo speakers | ✓ | ✓ | |
SOUND QUALITY | has active noise cancellation (noise control) | ✓ | ✗ |
has passive noise reduction | ✓ | ✗ | |
driver unit size | 10.6mm | 14.2mm | |
lowest frequency | 20Hz | 20Hz | |
highest frequency | 40000Hz | 40000Hz | |
sound pressure level | 92dB/mW | ✗ | |
POWER | battery life | 8hours | 5hours |
battery life of charging case | 24hours | 15hours | |
charge time | 2hours | 1.5hours | |
battery power | ✗ | 30mAh | |
has wireless charging | ✓ | ✗ | |
has a battery level indicator | ✓ | ✓ | |
CONNECTIVITY | has usb type-c | ✓ | ✓ |
bluetooth version | v5.2 | v5.2 | |
maximum bluetooth range | 10meters | 10meters | |
has aac | ✓ | ✗ | |
has ldac | ✓ | ✓ | |
audio latency | ✗ | 60ms | |
MICROPHONE | number of microphones | 6only | 4only |
has a noise-canceling microphone | ✓ | ✓ | |
EXTRAS | has ambient sound mode | ✓ | ✗ |
has in/on-ear detection | ✓ | ✗ | |
has find earbuds feature | ✓ | ✓ | |
supports fast charging | ✓ | ✓ | |
multipoint count | 2only | ✗ | |
has a mute function | ✓ | ✓ | |
control panel placed on a device | ✓ | ✓ | |
warranty period | 1Years | ✗ | |
has voice prompts | ✓ | ✓ | |
travel bag is included | ✓ | ✓ | |
See price on Amazon | See price on Amazon |
Ingress protection ratings refer to the rating of protection offered by an enclosure, against solids and liquids. In the format of IPXX, 'X' represents a number The first value means protection against solids say dust, followed by the one that refers to protection against liquids (water).
Scoring IPX4, the Soundpeats Air 3 Deluxe HS's rating for solids indicates that no data available to specify a protection rating, and the second value of 4 means that they can withstand low pressure spray similar to that of a shower head when tilted at 180° for 10 minutes.
In comparison to the Soundpeats Air 3 Deluxe HS, Anker Soundcore Liberty 3 Pro have a rating of IPX4 meaning that
we are not yet certain of their rating with solids (dust)
and that of liquids is that,
they both have the same rating against liquids
The Soundpeats Air 3 Deluxe HS have a weight of 8.12g . We consider a lower weight best for the reason that lighter devices are easier to transport.
The Anker Soundcore Liberty 3 Pro, at 12g
are heavier than the Soundpeats Air 3 Deluxe HS by of 3.88g
True wireless devices have no wires linking any part of the device together, Soundpeats Air 3 Deluxe HS are true wireless for this matter since they don't have cables. This is an important difference as some wireless earbuds have cables linking the two earbuds .
Anker Soundcore Liberty 3 Pro also is true wireless since it doesn't have cables linking the pair of earbuds together.
The Anker Soundcore Liberty 3 Pro come with wingtips, these are commonly used for earbuds for workouts and are usually an optional add-on to each silicone ear tip for a better fit.
Soundpeats Air 3 Deluxe HS are resistant to sweat
Anker Soundcore Liberty 3 Pro's resistance to sweat makes both devices ideal for use during long-distance running, marathons, cardio sweat workouts , etc
An earbud foam is designed to be ultracompact and lightweight, with almost no interference with earrings, spectacles, hats, or hairstyles. The Soundpeats Air 3 Deluxe HS have an earbud foam to some it is more comfortable than the in-ear foam.
Soundpeats Air 3 Deluxe HS have stereo speakers, what this means is that Soundpeats Air 3 Deluxe HS's speakers deliver sound from independent channels on both left and right sides, creating a richer sound and a better listening experience.
The Anker Soundcore Liberty 3 Pro also have stereo speakers
ANC utilises advanced technology to actively counter noise. How it works, it listens to the sound pattern of incoming noise and then inverts the soundwaves to counter it. In simple terms, it's like taking +1 (noise) and adding -1 (inverted noise) giving zero thus "diluting" the noise.
Anker Soundcore Liberty 3 Pro have Active Noise Cancellation allowing you to listen at lower levels of volume, good for your ears since you don't need to crank up the device volume to outcompete background noise.
Anker Soundcore Liberty 3 Pro stay well in place, this creates an acoustic seal that reduces your environment noise and also prevents the device music from leaking out .
The Soundpeats Air 3 Deluxe HS have a unit size of 14.2mm in diameter, the bigger the unit the more powerful, and can produce better bass.
A driver unit is basically a mini speaker that produces sound in the device, the unit size determines the sound made by the device.
Anker Soundcore Liberty 3 Pro driver unit is 10.6mm in diameter,
which means that they have a smaller driver unit than that of Soundpeats Air 3 Deluxe HS by 3.6mm
, as many tend to believe that driver units of a bigger size automatically produce better sound quality.
However, large drivers usually have difficulty producing high frequencies so yeah, larger drivers can generate louder sound, but this does not imply that they deliver better quality sound.
The Soundpeats Air 3 Deluxe HS's lowest frequency is at 20Hz, low-frequency response inidcates how well an audio component produces low frequencies that can be heard, and if it makes any changes to the signal while at it.
Anker Soundcore Liberty 3 Pro's lowest frequency is at 20Hz, this means that
both devices produce equal bass
Soundpeats Air 3 Deluxe HS's highest frequency is at 40000Hz, high-frequency response tells how well a particular audio device makes high audible frequencies and if it changes to the signal while at it.
Anker Soundcore Liberty 3 Pro's highest frequency is at 40000Hz, this means that
both devices produce equal treble
SPL, is the level of pressure of sound, in decibels, dB, Anker Soundcore Liberty 3 Pro's measurement is 92dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source.
The Soundpeats Air 3 Deluxe HS's battery life is 5 hours, these last less than 5 hours of listening which is considered average before recharge. A device's battery life is given by the manufacturer, and with more battery hours, you get to use it for longer and requires fewer chargings.
Anker Soundcore Liberty 3 Pro's battery life is
more than that of Soundpeats Air 3 Deluxe HS by 3 hours
. Every time you recharge your device, they get a little less listening time. The effect is barely noticeable at first, but over a few years, your wireless earbuds will have shorter listening time.
This is given by the vendor, and the Soundpeats Air 3 Deluxe HS's case is said to have a full charge of 15 hours. A charging case with a longer battery life enables you to recharge your earbuds on the go many times before recharging the case itself.
Anker Soundcore Liberty 3 Pro's charging case has a battery life of 24 hours,
more than that of Soundpeats Air 3 Deluxe HS by 9 hours
It takes 1.5 hours to fully charge the Soundpeats Air 3 Deluxe HS's battery. It is recommended to charge fully the battery before using the earbuds for the first time.
Anker Soundcore Liberty 3 Pro takes 2 hours to fully charge the battery,
more than that of Soundpeats Air 3 Deluxe HS by 0.5 hours
Soundpeats Air 3 Deluxe HS's battery capacity is 30mAh, battery power, represents the amount of electrical energy that a battery can store.
The Anker Soundcore Liberty 3 Pro, the device supports wireless charging. To charge the device, you just put down on a supported charging pad.
The Soundpeats Air 3 Deluxe HS have a battery level indicator, an indicator shows you when the earbuds has a low battery. The battery indicator lights indicate the charging state of your device and charging case.
Anker Soundcore Liberty 3 Pro too have a battery level indicator, charging indicators allow you tell the charging state of your device, whether fully charged, or having a low battery.
The Soundpeats Air 3 Deluxe HS use USB TYPE-C, a standard connector for transmitting both data and power through a single cable.
Anker Soundcore Liberty 3 Pro too have USB TYPE-C. This USB-C plug comes along with most current laptops, phones, and tablets.
The Soundpeats Air 3 Deluxe HS have Bluetooth version of 5.2, Bluetooth is a wireless technology standard that allows data transfers between devices placed in range, using short-wavelength, ultra-high frequency radio waves.
Anker Soundcore Liberty 3 Pro has a Bluetooth version of 5.2,
equal to that of the Soundpeats Air 3 Deluxe HS
. Newer versions provide faster data transfers.
Soundpeats Air 3 Deluxe HS have a 10meters distance to connect via Bluetooth.
Anker Soundcore Liberty 3 Pro have a maximum range of 10meters,
equal to that of the Soundpeats Air 3 Deluxe HS
Anker Soundcore Liberty 3 Pro support AAC, a codec that is used for Bluetooth audio. It supports 24-bit audio at 250kbps. Because it uses psychoacoustic modeling, it provides better results than other codecs at the same bit rate.
Since its the highest quality codec that any Bluetooth-supporting Apple product supports, the Anker Soundcore Liberty 3 Pro will work well with your iPhone. If you intend on using these with Android you need to pay even closer attention to codec support for if they only have AAC they won't provide the best audio quality possible, ensure that they also support aptX HD, LDAC, or LHDC as well.
The Soundpeats Air 3 Deluxe HS support LDAC, a codec developed by Sony
which allows streaming high-resolution audio over Bluetooth connections at up to 990 kbps at 32 bit/96 kHz.
It can reach a high bitrate of 990kbps, which provides high-resolution audio.
Anker Soundcore Liberty 3 Pro support it as well, LDAC, can automatically adjust to a lower bitrate of 330kbps or 660kbps for stability.
Latency refers to the time it takes for the audio signal to be transmitted to your earbuds. Soundpeats Air 3 Deluxe HS have a latency of 60ms, a lower latency reduces audio lag and is particularly important when playing games or watching videos.
Soundpeats Air 3 Deluxe HS have 4 microphones.
Anker Soundcore Liberty 3 Pro microphones are 6,
more than that of Soundpeats Air 3 Deluxe HS by 2
. More microphones result in better sound quality and help the device to filter out noise.
The Soundpeats Air 3 Deluxe HS have a noise-canceling type of microphone, these microphones are designed to reduce noise from the earbuds' sound.
The Anker Soundcore Liberty 3 Pro too use a noise-canceling type of microphone. This is useful in noisy environments.
Anker Soundcore Liberty 3 Pro support ambient sound mode, which uses microphones to pass through ambient sound to still be heard even while wearing the earbuds
Anker Soundcore Liberty 3 Pro support in/on-ear detection, the sensors in the earbuds can detect when they are removed from your ears .
If lost in a room, or can't easily find them in your bag, Soundpeats Air 3 Deluxe HS have a find earbuds feature.
Anker Soundcore Liberty 3 Pro too have the find earbuds feature. Use the earbuds app on your phone to play a sound from your earbuds to find them.
The Soundpeats Air 3 Deluxe HS support fast charging. Most often, technologies like MediaTek’s Pump Express, are used to lower the time it takes to fully charge a device.
Anker Soundcore Liberty 3 Pro too support fast charging. It's very similar to regular charging, only that the battery is filling up much faster. Say, with Quick Charge 3.0, the battery can be charged to 50% in just 30 minutes.
The Anker Soundcore Liberty 3 Pro support multipoint of 2 connections, this feature allows you connect to more than one Bluetooth device and switch between them. Say, you can switch calls from one device to another without having to manually disconnect and reconnect.
The Soundpeats Air 3 Deluxe HS have a mute function, they support the feature to mute/unmute a conversation directly from the earbuds.
The Anker Soundcore Liberty 3 Pro too support this function. The mute function means that you can turn off the device's microphone, but still hear the other party talk.
With the Soundpeats Air 3 Deluxe HS, so you can access the volume control, pause, play, mute, etc whichever features are supported on the earbuds.
The Anker Soundcore Liberty 3 Pro too have a control panel on them.
The Anker Soundcore Liberty 3 Pro have a warranty period of 1 Years, the period of time that warrant free repair and adjustment services in case of a malfunction occurring under normal use that has followed instruction manuals.
The Soundpeats Air 3 Deluxe HS have voice prompts. With voice prompts, you receive information through audio messages, say if there is an issue with the connection.
Anker Soundcore Liberty 3 Pro too have voice prompts .i.e the device notifies you if the battery is running low, and you need to recharge them.
Soundpeats Air 3 Deluxe HS come with a special pouch. Carrying earphones without a case, or putting them inside your bag without a casing can easily damage them.
Anker Soundcore Liberty 3 Pro also have a case included, which offers safe transportation.