JLab Go Air
See price on AmazonOverall Score 5.3 Represents average audio ecosystem compatibility score.
Ingress protection ratings is the level of protection offered by an enclosure, against solids and liquids. The letters 'IP' are followed by two values The first value of the IP rating represents protection against solids say dust, while the second refers to protection against liquids (water).
Scoring IP44, the JLab Go Air's rating is read as, the first number of 4 denotes that they are protected against objects greater than 1.0mm such as wire, and of liquids that they can withstand low pressure spray similar to that of a shower head when tilted at 180° for 10 minutes.
The JLab Go Air have a weight of 10g . We prefer a lower weight best for the reason that lighter devices are more comfortable to transport.
For a device to be true wireless it should have no wires connecting any part of the device together, JLab Go Air are true wireless for this matter since they don't have cables. This is an important distinction as some wireless earbuds have cables linking the two earbuds .
JLab Go Air are resistant to sweat
JLab Go Air have stereo speakers, what this means is that JLab Go Air's speakers deliver sound from independent channels on both left and right sides, this creates a richer sound and a better listening experience.
The JLab Go Air stay well in place, this creates a sound covering that reduces background sounds while preventing the device music from leaking out at the same.
The JLab Go Air driver unit is 8mm in diameter, the bigger the unit the more powerful, and can produce better bass. A driver unit is the component that produces sound in the device, the unit size determines the sound produced by the earbuds.
The JLab Go Air's lowest frequency is at 20Hz, low-frequency response measures if and how well an audio component produces low recognizable frequencies and if it makes any changes to the signal while at it.
JLab Go Air's highest frequency is at 20,000Hz, high-frequency response shows how well an audio component makes high recognizable frequencies and if it makes any changes to the signal on its way through.
SPL, is the pressure level of sound, measured in decibels, dB, JLab Go Air's measurement is 103dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source.
The JLab Go Air's battery life is 5 hours, these last less than 5 hours of listening which is considered average for a single charge. A device's battery life is usually given by the manufacturer, and with more battery hours, you get to use it for longer and have to charge the device less often.
This is given by the manufacturer, and the JLab Go Air's case has a full charge of 15 hours. A charging case with more battery hours allows you to recharge your earbuds on the go many times before recharging the case itself.
It requires 1.5 hours to fully charge the JLab Go Air's battery. It is highly adivsable to charge fully the battery before using the earbuds for the first time.
JLab Go Air have a battery level indicator, an indicator notifies you when the device has a low battery. Its lights indicate the charging status of your earbuds and charging case.
The JLab Go Air have Bluetooth version of 5, Bluetooth is a wireless technology standard that allows data movement between devices placed in close proximity, using short-wavelength, ultra-high frequency radio waves.
JLab Go Air have a 10meters distance connecting via Bluetooth.
The JLab Go Air have 2 microphones.
JLab Go Air microphone sensitivity is measured at -38dBV/Pa. The size of the analog or digital output signal from the microphone with its input stimulus is a calculation of its sensitivity. It's the 'loudness' of the voice that the microphone can recognize.
The JLab Go Air, so you can access the volume control, pause, play, mute, etc whichever functions are supported on the device.
JLab Go Air have a warranty period of 2 Years, the period of time that warrant free repair and adjustment services in case of a malfunction occurring under normal use following instruction manuals.
JLab Go Air have voice prompts. Automatically receive information through audio messages, like if there is a problem with the connection.