JLab Go Air
See price on AmazonOverall Score 5.3 Represents average audio ecosystem compatibility score.
IP ratings refer to the rating of protection offered by a casing, against solids and water. In the format of IPXX, 'X' represents a number The first value of the IP rating means protection against solids such as dust, followed by the one that refers to resistance against liquids (sweat).
Scoring IP44, the JLab Go Air's rating for solids indicates that they are protected against objects greater than 1.0mm such as wire, and of liquids that they can withstand low pressure spray similar to that of a shower head when tilted at 180° for 10 minutes.
JLab Go Air have a weight of 10g . We take in account a lower weight best for the reason that lighter devices are more comfortable to carry.
For a device to be true wireless it should have no cables linking any part of the device together, JLab Go Air are true wireless for this matter since they have no wires. This is a major difference since wireless earbuds have wires connecting the two earbuds together.
JLab Go Air are resistant to sweat
JLab Go Air have stereo speakers, devices with stereo speakers deliver sound from independent channels on both left and right sides, creating a richer sound and a better listening experience.
The JLab Go Air sit well in place, this creates a sound covering that reduces background sounds while preventing the device voice audio from leaking out .
The JLab Go Air have a unit size of 8mm in diameter, bigger drivers are more powerful, therefor producing better bass. A driver unit is basically a mini speaker that produces sound in the device, its size determines the loudness of the earbuds.
The JLab Go Air's lowest frequency is at 20Hz, low-frequency response inidcates how well an audio device generates low audible frequencies and if it makes any changes to the signal on its way through.
The JLab Go Air's highest frequency is at 20,000Hz, high-frequency response indicates how well a particular audio device makes high human frequencies and if it adjustments to the signal on its way through.
SPL, is the level of pressure of sound, measured in decibels, dB, JLab Go Air's measurement is 103dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source.
The JLab Go Air's battery life is 5 hours, these last less than 5 hours of listening which is considered average for a single charge. A device's battery life is commonly given by the manufacturer, and with longer battery life, you get to use it for longer and have to charge the device less often.
The battery life of the charging case is given by the vendor, and the JLab Go Air's case has a charge of 15 hours. A charging case with a longer battery life allows you to recharge your earbuds on the go several times before having to recharge the case itself.
It requires 1.5 hours to fully charge the JLab Go Air's battery. It is recommended to charge fully the battery before using the earbuds when they have been unused for extended periods.
JLab Go Air have a battery level indicator, an indicator alerts you when the device has a low battery. Its lights display the charging state of your earbuds and case.
JLab Go Air have Bluetooth version of 5, Bluetooth is a wireless technology standard that enables data movement between devices placed in range, using short-wavelength, ultra-high frequency radio waves.
The JLab Go Air have a 10meters distance to connect via Bluetooth.
The JLab Go Air have 2 microphones.
JLab Go Air microphone sensitivity is measured at -38dBV/Pa. The size of the analog or digital output signal from the microphone with its input stimulus is a measure of its sensitivity. It's the 'loudness' of the sound that the microphone can recognize.
The JLab Go Air, so you can access the volume control, pause, play, mute, etc whichever features are supported on the earbuds.
JLab Go Air have a warranty period of 2 Years, the period of time that warrant free repair and adjustment services in case of a malfunction occurring under normal use that has followed instruction manuals.
The JLab Go Air have voice prompts. Automatically receive information through audio messages, like if there is an issue with the connection.