Overall Score 5.1 Represents average audio ecosystem compatibility score.
Overall Score 5.1 Represents average audio ecosystem compatibility score.
Category | Features | Tozo T10S | Mpow Flame S |
---|---|---|---|
DESIGN | ingress protection (ip) rating | IPX8 | IPX7 |
weight | 10g | ✗ | |
has no wires or cables | ✓ | ✗ | |
wingtips included | ✗ | ✓ | |
sweat resistance | ✓ | ✓ | |
has stereo speakers | ✓ | ✓ | |
waterproof depth rating | 1meters | ✗ | |
SOUND QUALITY | has active noise cancellation (noise control) | ✗ | ✓ |
has passive noise reduction | ✓ | ✓ | |
driver unit size | 8mm | ✗ | |
lowest frequency | 20Hz | ✗ | |
highest frequency | 20000Hz | ✗ | |
POWER | battery life | 8hours | 12hours |
battery life of charging case | 28hours | ✗ | |
charge time | 2hours | ✗ | |
has a battery level indicator | ✓ | ✓ | |
CONNECTIVITY | has usb type-c | ✓ | ✗ |
bluetooth version | v5.2 | v5 | |
maximum bluetooth range | 10meters | 10meters | |
has aac | ✓ | ✓ | |
has ldac | ✗ | ✓ | |
has aptx adaptive | ✗ | ✓ | |
has aptx low latency | ✗ | ✓ | |
has aptx hd | ✗ | ✓ | |
MICROPHONE | number of microphones | 2only | ✗ |
has a noise-canceling microphone | ✗ | ✓ | |
EXTRAS | has ambient sound mode | ✗ | ✓ |
has in/on-ear detection | ✗ | ✓ | |
has find earbuds feature | ✗ | ✓ | |
supports fast charging | ✓ | ✓ | |
has a mute function | ✓ | ✓ | |
control panel placed on a device | ✓ | ✓ | |
has voice prompts | ✓ | ✓ | |
travel bag is included | ✓ | ✓ | |
See price on Amazon | See price on Amazon |
Ingress protection ratings refer to the rank of protection given by a casing, against solids and liquids. The letters 'IP' are followed by two values The first value means protection against solids say dust, followed by the one that refers to resistance against liquids (water).
Scoring IPX8, the Tozo T10S's rating is read as, the first number of X denotes that no data available to specify a protection rating, and of liquids that they are protected against the effects of continuous immersion in water, ingress of water in quantities causing harmful effects shall not be possible. Conditions should be more severe than for numeral 7..
In comparison to the Tozo T10S, Mpow Flame S have a rating of IPX7 meaning that
we are not yet certain of their rating with solids (dust)
and that of liquids is that,
Tozo T10S has a higher liquid rating than Mpow Flame S
Tozo T10S have a weight of 10g . We consider a lower weight best because lighter devices are easier to move with.
True wireless devices have no wires linking any part of the device together, Tozo T10S are true wireless for this case since they don't have wires. This is a key difference as some wireless earbuds have cables linking the pair of earbuds together.
Mpow Flame S have wingtips, these are commonly used for earbuds for workouts and are usually an optional add-on to each silicone ear tip for a more secure fit.
Tozo T10S have sweat resistance
Mpow Flame S's resistance to sweat makes both devices ideal for use while doing sports such as long-distance running, marathons, cardio sweat workouts , etc
Tozo T10S have stereo speakers, what this means is that Tozo T10S's speakers deliver sound from separate channels on both left and right sides, creating a richer sound and a better listening experience.
The Mpow Flame S also have stereo speakers
Tozo T10S are rated 1meters any depth more than that they will be spoilt. Devices that have a higher depth rating are better for swimming.
Active noise cancellation utilises more advanced technology to reduce unwanted ambient sounds. ANC works when, it listens to the sound pattern of incoming noise and generates a mirror signal to cancel it out. Simply put, it's like having +1 (noise) and adding -1 (inverted noise) to make zero therefore "diluting" the noise.
The Mpow Flame S have ANC allowing you to listen at lower levels of volume, causing less ear fatigue since you don't need to crank up the earbuds volume to outcompete background noise.
The Tozo T10S stay tightly in place, this creates a sound covering that reduces background noise well as preventing the device sound from leaking out at the same.
Both Mpow Flame S, and Tozo T10S have passive noise reduction this implies that they limit ambient noise without using ANC to cancel it out.
The Tozo T10S driver unit is 8mm in diameter, the bigger the unit the more powerful, and can produce better bass. A driver unit is the component that produces sound in the device, the unit size corellates with the loudness of the device.
Tozo T10S's lowest frequency is at 20Hz, low-frequency response inidcates how well a particular audio component produces low audible frequencies and if it alters the signal while at it.
The Tozo T10S's highest frequency is at 20000Hz, high-frequency response measures if and how well a particular audio device makes high recognizable frequencies and if it adjustments to the signal while at it.
The Tozo T10S's battery life is 8 hours, these last longer than 5 hours of listening which is considered average for a single charge. A device's battery life is usually given by the manufacturer, and with more battery hours, you get to use it for longer and requires fewer chargings.
Mpow Flame S's battery life is
more than that of Tozo T10S by 4 hours
. Every time you recharge your earbuds, they get a little less playing time. The effect is not noticeable at first, but over time, your wireless earbuds will no longer play for long like they used to.
The battery life of the charging case is given by the manufacturer, and the Tozo T10S's case is said to have a charge of 28 hours. A charging case with a longer battery life allows you to recharge your earbuds on the go many times before recharging the case itself.
It requires 2 hours to fully charge the Tozo T10S's battery. It is recommended to charge fully the battery before using the earbuds when they have been in storage for long periods.
Tozo T10S have a battery level indicator, an indicator alerts you when the device has a low battery. The battery indicator lights indicate the charging status of your earbuds and charging case.
Mpow Flame S too have a battery level indicator, these allow you determine the charging state of your device, if charged fully, or having a low battery.
The Tozo T10S use USB TYPE-C, an industry-standard connector for transmitting both data and power through a single cable.
The Tozo T10S have Bluetooth version of 5.2, Bluetooth is a wireless technology standard that allows data movement between devices placed in close proximity, using short-wavelength, ultra-high frequency radio waves.
Mpow Flame S has a Bluetooth version of 5,
older than that of Tozo T10S
. Newer versions provide faster data transfers.
The Tozo T10S have a 10meters distance connecting via Bluetooth.
Mpow Flame S have a maximum range of 10meters,
equal to that of the Tozo T10S
Tozo T10S support AAC, a codec used for Bluetooth audio. It supports 24-bit audio at 250kbps. Since it uses psychoacoustic modeling, it provides better results than other codecs at the same bit rate.
Since its the highest quality codec that any Bluetooth-supporting Apple product supports, the Tozo T10S will work well with your iPhone. If you intend on using these with Android , ensure that they also support aptX HD, LDAC, or LHDC as well.
The Mpow Flame S support AAC as well. Designed to be the successor of the MP3 format, AAC generally achieves higher sound quality than MP3 encoders at the same bit rate.
The Mpow Flame S support LDAC, a codec developed by Sony which allows streaming high-resolution audio over Bluetooth connections at up to 990 kbps at 32 bit/96 kHz. It is capable of a very high bitrate of 990kbps, providing high-resolution audio.
Mpow Flame S support APTX Adaptive, an audio codec for Bluetooth devices that are developed by Qualcomm. It has a variable bit rate (between 279kbps and 420kbps).
Mpow Flame S support APTX Low Latency, a codec developed by Qualcomm. It uses Bluetooth 5.0 technology to provide low latency audio (around 40ms), which is useful when you want to avoid audio lag for example when playing games.
The Mpow Flame S support APTX HD, an audio codec for Bluetooth devices that are developed by Qualcomm. It supports high-quality 24-bit audio (at a bit rate of 576kbps).
The Mpow Flame S have a noise-canceling microphone, these microphones are intended to filter out background sounds from the earbuds' sound.
Mpow Flame S support ambient sound mode, which uses microphones to pass through ambient sound so that they can still be heard even while wearing the earbuds
Mpow Flame S support in/on-ear detection, the sensors in the device can detect when they are removed from your ears .
If lost in a room, or can't easily find them in your bag, the Mpow Flame S have a find earbuds feature.
The Tozo T10S support fast charging. Usually, technologies like Qualcomm’s Quick Charge, are used to lower the amount of time it takes to fully charge a device.
The Mpow Flame S support fast charging. This kind is similar to regular charging, just that the battery is filling up much faster. Say, with Quick Charge 3.0, the battery is charged to 50% in thirty minutes.
Tozo T10S have a mute function, they have the option to mute/unmute a conversation directly from the device.
The Mpow Flame S too have the mute function. It means that you are in position turn off the device's microphone, but you can still hear the other party talk.
With the Tozo T10S, so you can easily access the volume control, pause, play, mute, etc whichever functions are supported on the device.
The Mpow Flame S also have a control panel on them.
The Tozo T10S have voice prompts. Automatically receive information through audio messages, say if there is a problem with the connection.
Mpow Flame S too support voice prompts .i.e the device will notify you if the battery is low, and it's time to recharge them.
Tozo T10S come with a special pouch. Carrying earbuds without a case, or placing them inside your pockets without a casing can easily damage them.
Mpow Flame S too have a travel bag included, which is useful for safe transportation.