Home Portable Speakers Turtlebox Gen 2 Vs. Bang & Olufsen Beolit 20

Turtlebox Gen 2 Vs. Bang & Olufsen Beolit 20 Review

Last updated on Aug 18, 2024   14 minute read
Note: This page may contain affiliate links, we only earn from qualifying purchases!
Turtlebox Gen 2

Turtlebox Gen 2

See price on Amazon

Reasons why you might like the Turtlebox Gen 2

Overall Score 6.4 Represents average audio ecosystem compatibility score.

  • Ingress Protection (Ip) Rating of IP67
  • Has A Subwoofer
  • Battery Life of 25 hours
VS
Bang & Olufsen Beolit 20

Bang & Olufsen Beolit 20

See price on Amazon

Reasons why you might like the Bang & Olufsen Beolit 20

Overall Score 5.9 Represents average audio ecosystem compatibility score.

  • Battery Life of 37 hours
  • Has A Mobile App

Turtlebox Gen 2 Vs. Bang & Olufsen Beolit 20 Review In Summary

Category Features Turtlebox Gen 2 Bang & Olufsen Beolit 20
DESIGN ingress protection (ip) rating IP67
volume 5,868.45cm³
weight 4,540g 2,700g
height 222.25mm 230mm
width 304.8mm 135mm
thickness 177.8mm 189mm
is dust proof and water resistant
SOUND QUALITY has a subwoofer
size of subwoofer 190.5mm
has stereo speakers
driver unit size 63.5mm 140mm
drivers count 1only 4only
has a passive radiator
snr - signal to noise ratio 80dB
audio output power 120W
lowest frequency 20Hz 37Hz
highest frequency 20,000Hz 20,000Hz
POWER battery life 25hours 37hours
charge time 2.5hours 3hours
has a battery level indicator
operating power consumption 20W 30W
standby mode power consumption 0.5W 0.5W
CONNECTIVITY can be used wirelessly
has an aux input
has a socket for a 3.5 mm audio jack
has bluetooth
bluetooth version v5 v4.2
maximum bluetooth range 10meters 10meters
has usb type-c
usb ports 1only
has a microphone input
EXTRAS has a mobile app
has voice prompts
control panel placed on a device
See price on Amazon See price on Amazon

Ingress protection ratings refer to the level of protection offered by an electrical enclosure, against solids and liquids. In the format of IPXX, 'X' represent a number The first number of the IP rating refers to protection against solids say dust, while the second refers to protection against liquid.

Scoring IP67, the Turtlebox Gen 2's rating is read as, the first value of 6 denotes that they are completely dust proof, and the second number of 7 means that they are protected against temporary immersion in water under set conditions, say 1 metre for 30 minutes.

We prefer a lower weight best because lighter devices are more comfortable to transport. A lower weight is also an advantage for home appliances, as it makes transportation easier, and for many other types of products. Bang & Olufsen Beolit 20, at 2,700g weigh less than the Turtlebox Gen 2 by g.

Most of the time a genuine quality system is a little bit heavier than average quality products though If you will need to change the position of the soundbar often, then you should aim to purchase a lighter soundbar. The height represents the vertical dimension of a device, Turtlebox Gen 2 has a height of 222.25mm. The Bang & Olufsen Beolit 20, at 230mm is longer in height than the Turtlebox Gen 2 by 7.75mm This represents the horizontal dimension of a device, Turtlebox Gen 2 has a width of 304.8mm.

Bang & Olufsen Beolit 20, at 135mm is smaller in width than the Turtlebox Gen 2 by -169.8mm The thickness (or depth) of Turtlebox Gen 2 is 177.8mm, to know the thickness of the speaker you divide its volume(space occupied) by the surface area( length by width) Bang & Olufsen Beolit 20 has a thickness of 189mm, meaning that it is thicker than the Turtlebox Gen 2 with a difference 11.2mm The Turtlebox Gen 2 is dustproof and water-resistant. A water-resistant device can resist the penetration of water, such as powerful water jets, if it is to be submerged in the water this is usually set to a given depth and for a specific time period. A subwoofer is a speaker that delivers lower frequencies in the range of 20 -200Hz, the low frequencies are produced by instruments such as pipe organs, bass guitars, even the kick drums, and any explosive sound effects say in a movie.

Devices that have a subwoofer inbuilt give a richer bass sound when listening to bass-heavy music like hip hop. Bigger subwoofers are capable of producing deeper bass sounds. Turtlebox Gen 2 has a 190.5 mm subwoofer Turtlebox Gen 2 has stereo speakers, devices with stereo speakers deliver sound from independent channels on both left and right sides, this creates a richer sound and a better listening experience.

The Bang & Olufsen Beolit 20 also has stereo speakers The driver unit is the component that produces sound in the device, its size dictates the loudness of the headphone. Turtlebox Gen 2 driver unit is 63.5mm in diameter, bigger drivers are more powerful and can produce better bass. Bang & Olufsen Beolit 20 driver unit is 140mm in diameter, making them have a larger driver unit than that of Turtlebox Gen 2 by 76.5mm , as many tend to believe that driver units of a bigger size automatically produce better sound quality.



However, large drivers usually have difficulty reproducing high frequencies so yeah, larger drivers are capable of generating louder sound, but this does not mean that they produce better sound. A speaker driver is an individual transducer that converts electrical energy to sound waves. Drivers come in different sizes and modes, but generally, you'll find three types: tweeter driver, which handles the high-frequency treble range (above 2,000 Hz), and midrange driver: which handles the midrange frequencies (200 Hz to 2,000 Hz). Woofer driver: handles the low-frequency bass range (below 200 Hz).

Based on the frequencies they handle more drivers may result in better sound quality, Turtlebox Gen 2 has 1 only.

Bang & Olufsen Beolit 20 has 4 only A passive radiator is a type of driver in speakers that can get extra power and resonance from a speaker system, usually used in smaller speaker systems. This radiator is called passive because it is not powered by electricity but by air pressure found in speaker cones.

The sound vibrations produced by a passive radiator depend on its mass and the size of its enclosure.

It is usually used in combination with a woofer to produce deep, resonant tones that would normally be produced by speakers in large boxes powered by AC. The Bang & Olufsen Beolit 20 and Turtlebox Gen 2 both have a passive radiator The signal-to-noise ratio is a measure that compares the meaningful sound a speaker produces to the level of noise produced by internal components of that speaker, the higher the number the less perceived noise. Turtlebox Gen 2 has an audio signal level of 80 dB higher than the level of noise.

The audio output power of a device is based on the number of speakers and their power in watts Turtlebox Gen 2 has 120W, this is the amount of power the speakers can be loaded with "comfortably".

A higher audio output power results in louder, clearer sounds though this is not the sole factor determining the device's loudness. To better understand how loud any speaker can get, there are other features to factor in such as sensitivity, sound pressure, etc. Low-frequency response measures if and how well an audio component reproduces low audible frequencies and if it makes any changes to the signal while at it.

Turtlebox Gen 2's lowest frequency is at 20Hz, the lower the low-frequency response, the stronger and juicier the bass. Bang & Olufsen Beolit 20's lowest frequency is at 37Hz, this means that Bang & Olufsen Beolit 20 got a juicier bass than the Turtlebox Gen 2 High frequency response measures if and how well a particular audio component reproduces high audible frequencies and if it makes any changes to the signal on the way through. Turtlebox Gen 2's highest frequency is at 20,000Hz, the higher the high-frequency response, the clearer and crispier the treble.

Bang & Olufsen Beolit 20's highest frequency is at 20,000Hz, this means that both devices produce equal treble Your speaker's battery life will reduce over time while in use, the battery life is given by the manufacturer, and with longer battery life, you get to use it for longer and have to charge the device less often. Turtlebox Gen 2's battery life is 25 hours Bang & Olufsen Beolit 20's battery life is 37 hours. Each time you recharge your device, it gets a little less listening time.

The effect is barely noticeable at first. But over a few years, you may find that your speaker, no longer plays for long like it used to. It takes 2.5 hours to fully charge the Turtlebox Gen 2's battery.

It is recommended to fully charge the battery before using it for the first time or when they have been unused for extended periods. Bang & Olufsen Beolit 20 takes 3 hours to fully charge the battery Turtlebox Gen 2 has a battery level indicator, an indicator shows you when the device has a low battery. The battery indicator lights indicate the charging status of your speaker.

Bang & Olufsen Beolit 20 too has a battery level indicator, charging indicators allow you to determine the charging state of your speaker, whether fully charged, or the battery is running low. The amount of power a speaker uses depends on the loudness of the audio being played, its sensitivity, and the amplifier's volume. Operating power consumption is how much power the device consumes when it's in use.

Turtlebox Gen 2's operating power consumption is 20W Bang & Olufsen Beolit 20's operating power consumption is 30W Also known as a device's energy-saving mode, the power consumption in standby mode measures the amount of power the device consumes when shut down but still plugged in. Turtlebox Gen 2 has a standby mode power consumption of 0.5W Bang & Olufsen Beolit 20 has an energy-saving mode power consumption of 0.5W Turtlebox Gen 2 can be used wirelessly, wireless devices allow users more freedom of movement. The Bang & Olufsen Beolit 20 also can be used wirelessly Bluetooth is a wireless technology that allows you to easily transfer data between different devices, such as smartphones, tablets, and computers.

Bluetooth is a wireless technology standard that allows data transfers between devices placed in close proximity, using short-wavelength, ultra-high frequency radio waves. Turtlebox Gen 2 has a v5 Bang & Olufsen Beolit 20 has a Bluetooth version of v4.2. Newer versions provide faster data transfers.

Bluetooth is a short-range wireless technology standard that is used for exchanging data between fixed and mobile devices over short distances. The Turtlebox Gen 2 can connect at a 10meters distance via Bluetooth or infrared to another device. The Bang & Olufsen Beolit 20 can connect at a 10meters distance via Bluetooth Turtlebox Gen 2 supports USB TYPE-C, an industry-standard connector for transmitting both data and power on a single cable.

The USB-C plug is now part and parcel of most current laptops, phones, and tablets, it features reversible plug orientation and cable direction. Bang & Olufsen Beolit 20 too has USB TYPE-C A microphone port allows for connecting external high-end or specialized microphones that are better than those in-built into the device if any. There is a control panel on the Turtlebox Gen 2 body, so you can easily access the volume control or remote without having to interact with a cable or another device it's connected to.

The Bang & Olufsen Beolit 20 too have a control panel on them.

kinsta kinsta