Overall Score 6.8 Represents average audio ecosystem compatibility score.
Overall Score 6.6 Represents average audio ecosystem compatibility score.
Ingress protection ratings is the rating of protection given by an enclosure, against solids and liquids. The letters 'IP' are followed by two values The first value means protection against solids such as dust, while the second refers to protection against liquids (sweat).
Having a value of IP54, the Xiaomi Redmi Buds 4 Pro's rating is read as, the first value of 5 denotes that ingress of dust is not totally prevented but dust does not enter in harmful quantities to interfere with the correct operation or impair safety, and of liquids that they can withstand low pressure spray similar to that of a shower head when tilted at 180° for 10 minutes.
In comparison to the Xiaomi Redmi Buds 4 Pro, Sennheiser CX 500BT have a rating of IPX4 meaning that
no data available to specify a protection rating
and that of liquids is that,
they both have the same rating against liquids
The Xiaomi Redmi Buds 4 Pro have a weight of 10g . We take in account a lower weight better for the reason that lighter devices are easier to move with.
The Sennheiser CX 500BT, at 12g
are heavier than the Xiaomi Redmi Buds 4 Pro with a difference of 2g
For a device to be true wireless it must have no wires linking any part of the device together, Xiaomi Redmi Buds 4 Pro are true wireless for this case since they have no wires. This is a key difference since wireless earbuds have wires connecting the two earbuds .
Sennheiser CX 500BT also is true wireless because it has no cables linking the pair of earbuds .
Xiaomi Redmi Buds 4 Pro are resistant to sweat
Sennheiser CX 500BT's resistance to sweat makes both devices good for use during long-distance running, marathons, cardio sweat workouts , etc
Xiaomi Redmi Buds 4 Pro are both dustproof and water-resistant.
Xiaomi Redmi Buds 4 Pro have stereo speakers, devices with stereo speakers deliver sound from separate channels on both left and right sides, this creates a richer sound and a better listening experience.
The Sennheiser CX 500BT also have stereo speakers
ANC makes use of advanced technology to actively cancel noise. How it works, it detects and analyzes the sound pattern of incoming noise and after generates a mirror signal to counter it. Simply put, it's like taking +1 (noise) and adding -1 (inverted noise) to make 0 resulting in a reduced level of noise.
Xiaomi Redmi Buds 4 Pro have ANC allowing you to listen at lower volume levels, good for your ears as you don't have to crank up the earbuds volume to overcome background sounds.
The Sennheiser CX 500BT too have Active Noise Cancellation making both devices ideal for flights and morning commutes. Each operate with different noise cancellation types, pick the noise cancellation type that suits your travel or that enhances your relaxation time.
The Xiaomi Redmi Buds 4 Pro stay well in place, this creates an acoustic covering that tones down background noise and also prevents the device sound from leaking out .
Both of these devices have passive noise reduction which means that they tone down ambient noise instead of actively using technology to cancel it out.
The Xiaomi Redmi Buds 4 Pro have a unit size of 11mm in diameter, the bigger the unit the more powerful, and can produce better bass. A driver unit is the component that produces sound in the device, its size corellates with the sound produced by the device.
The Xiaomi Redmi Buds 4 Pro's lowest frequency is at 20Hz, low-frequency response measures if and how well an audio component produces low recognizable frequencies and if it makes any changes to the signal while at it.
Sennheiser CX 500BT's lowest frequency is at 5Hz, this implies that
Sennheiser CX 500BT can produce a juicier bass than the Xiaomi Redmi Buds 4 Pro
Xiaomi Redmi Buds 4 Pro's highest frequency is at 40000Hz, high-frequency response tells how well an audio component makes high recognizable frequencies and if it changes to the signal on its way through.
Sennheiser CX 500BT's highest frequency is at 21000Hz, this implies that
Xiaomi Redmi Buds 4 Pro can generate a clearer and crispier treble than the Sennheiser CX 500BT
SPL, is the level of pressure of sound, measured in decibels, dB, Sennheiser CX 500BT's measurement is 94dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source.
The Xiaomi Redmi Buds 4 Pro's battery life is 9 hours, a device's battery life is given by the manufacturer, and with more battery hours, you get to use it for longer and requires fewer chanrgings.
Sennheiser CX 500BT's battery life is
less than that of Xiaomi Redmi Buds 4 Pro by 1 hours
. Every time you recharge your earbuds, they get a little less playing time. The effect is not noticeable at first, but over a few years, your wireless earbuds will no longer play for long like they used to.
The battery life of the charging case is given by the vendor, and the Xiaomi Redmi Buds 4 Pro's case has a charge of 29 hours. A charging case with a longer battery life enables you to recharge your earbuds on the go several times before recharging the case itself.
Sennheiser CX 500BT's charging case has a battery life of 16 hours,
less than that of Xiaomi Redmi Buds 4 Pro by 13 hours
It requires 1 hours to fully charge the Xiaomi Redmi Buds 4 Pro's battery. It is highly adivsable to charge fully the battery before using the earbuds for the first time.
Xiaomi Redmi Buds 4 Pro's battery power is 53mAh, battery power, represents the amount of electrical energy that a battery can keep.
The Xiaomi Redmi Buds 4 Pro have a battery level indicator, an indicator alerts you when the device has a low battery. Its lights display the charging status of your earbuds and case.
Sennheiser CX 500BT too have a battery level indicator, these allow you to tell the charging state of your device, whether fully charged, or having a low battery.
Xiaomi Redmi Buds 4 Pro use USB TYPE-C, a standard connector for transmitting both data and power in a single cable.
Sennheiser CX 500BT too support USB TYPE-C. This USB-C plug is part and parcel of most current electronics.
Xiaomi Redmi Buds 4 Pro have Bluetooth version of 5.3, Bluetooth is a wireless technology standard that allows data movement between devices placed in close proximity, using short-wavelength, ultra-high frequency radio waves.
Sennheiser CX 500BT has a Bluetooth version of 5.2,
older than that of Xiaomi Redmi Buds 4 Pro
. Newer versions provide faster data transfers.
Xiaomi Redmi Buds 4 Pro have a 10meters distance connecting via Bluetooth.
Sennheiser CX 500BT have a maximum range of 10meters,
equal to that of the Xiaomi Redmi Buds 4 Pro
Xiaomi Redmi Buds 4 Pro support AAC, a codec that is used for Bluetooth audio. It supports 24-bit audio at 250kbps. Because it uses psychoacoustic modeling, it provides better results than other codecs at a similar bit rate.
Being the highest quality codec that any Bluetooth-supporting Apple product supports, the Xiaomi Redmi Buds 4 Pro will work well with your iPhone. If you are planning on using these with Android you need to pay even closer attention to codec support for if they only have AAC they won't provide the best audio quality possible, ensure that they also support aptX HD, LDAC, or LHDC as well.
The Sennheiser CX 500BT support AAC as well. Designed to be the successor of the MP3 format, AAC generally achieves higher sound quality than MP3 encoders at the same bit rate.
Xiaomi Redmi Buds 4 Pro support LDAC, a codec developed by Sony which allows streaming high-resolution audio over Bluetooth connections at up to 990 kbps at 32 bit/96 kHz. It is capable of a very high bitrate of 990kbps, which provides high-resolution audio.
Sennheiser CX 500BT support APTX Adaptive, an audio codec for Bluetooth devices that are developed by Qualcomm. It has a variable bit rate (between 279kbps and 420kbps).
The Xiaomi Redmi Buds 4 Pro have 6 microphones.
The Sennheiser CX 500BT microphones are 4,
less than that of Xiaomi Redmi Buds 4 Pro by 2
. More microphones result in better sound quality and enable the device to filter out noise.
Xiaomi Redmi Buds 4 Pro use a noise-canceling microphone, these microphones are intended to filter out background sounds from the desired sound.
The Sennheiser CX 500BT too have a noise-canceling microphone. Especially useful in noisy areas.
The Sennheiser CX 500BT's highest mic frequency is 10000Hz, high frequencies are better for picking up treble. The highest mic frequency of a microphone is defined as its upper limiting frequency.
The Sennheiser CX 500BT's lowest mic frequency is 100Hz, low frequencies are best for picking up bass. The lowest mic frequency of a microphone is defined as its lower limiting frequency.
The Xiaomi Redmi Buds 4 Pro support ambient sound mode, which uses microphones to pass through ambient noises to still be heard even when wearing them
The Sennheiser CX 500BT support ambient sound mode as well, helpful when you want to listen to music but also be aware of your surrounding, for example when you’re having a run but still want to hear traffic.
The Xiaomi Redmi Buds 4 Pro support in/on-ear detection, the sensors in the earbuds can detect when removed from your ears .
Sennheiser CX 500BT too support in/on-ear detection, automatically pauses your music, or audiobook when you remove earbuds from your ears saving battery life.
When misplaced in a room, or can't easily find them in your bag, Xiaomi Redmi Buds 4 Pro have a find earbuds feature.
The Sennheiser CX 500BT too have the find earbuds feature. You can use the earbuds app on your phone to play an alarm from your earbuds to help you find them.
Xiaomi Redmi Buds 4 Pro support fast charging. Most often, technologies like MediaTek’s Pump Express, are used to lower the time it takes to charge the earbuds.
The Sennheiser CX 500BT support fast charging. This kind is similar to regular charging, just that the battery is filling up much faster. For example, with Quick Charge 3.0, the battery can be charged to 50% in thirty minutes.
The Xiaomi Redmi Buds 4 Pro support multipoint of 2 connections, this feature allows you connect to more than one Bluetooth device and switch between them. For example, you can switch calls from one device to another without manually disconnect and reconnect.
Xiaomi Redmi Buds 4 Pro have a mute function, they have the feature to mute/unmute a conversation directly from the device.
The Sennheiser CX 500BT also support the mute function. The mute function means that you are in position turn off the earbuds' microphone, but you can still hear the other party's voice.
With the Xiaomi Redmi Buds 4 Pro, so you can easily access the volume control, pause, play, mute, etc whichever functions are supported on the device.
Sennheiser CX 500BT also have a control panel on them.
The Sennheiser CX 500BT have a warranty period of 2 Years, the period of time that warrant free repair and adjustment services in case of a malfunction occurring under normal use that has followed instruction manuals.
The Xiaomi Redmi Buds 4 Pro support voice prompts. Automatically receive information via audio messages, say if there is a problem with the connection.
The Sennheiser CX 500BT also have voice prompts meaning the earbuds notifies you when the battery is running low, and you need to recharge them.
The Xiaomi Redmi Buds 4 Pro come with their own special pouch. Carrying earphones without a case, or placing them in your pockets without a casing may easily put them at risk of getting damaged.
Sennheiser CX 500BT too have a travel bag included, which offers safe transportation.