Beats Studio Buds Review

IP ratings refer to the rank of protection offered by an enclosure, against dust and water. The letters 'IP' are followed by two values The first value of the IP rating represents protection against solids such as dust, while the second refers to protection against liquids (sweat).

Having a value of IPX4, the Beats Studio Buds's rating for solids indicates that no data available to specify a protection rating, and of liquids that they can withstand low pressure spray similar to that of a shower head when tilted at 180° for 10 minutes. The Beats Studio Buds have a weight of 5.1g . We consider a lower weight best for the reason that lighter devices are more comfortable to move with.

True wireless devices have no wires linking any part of the device together, Beats Studio Buds are true wireless for this matter since they have no wires. This is an important difference as some wireless earbuds have cables linking the 2 earbuds together. Beats Studio Buds are resistant to sweat Beats Studio Buds have stereo speakers, what this means is that Beats Studio Buds's speakers deliver sound from independent channels on both left and right sides, this creates a richer sound and a better listening experience.

Active noise cancellation utilises more advanced technology to reduce unwanted ambient sounds. ANC works when, it studies the sound pattern outside and inside the earbud and generates a mirror signal to counter it. In simple terms, it's like taking +1 (sound from your surrounding) then adding -1 (inverted noise) to make zero which results in a reduced level of noise.

Beats Studio Buds have Active Noise Cancellation enabling you to listen at lower volume levels, good for your ears since you don't have to crank up the device volume to overcome background sounds. The Beats Studio Buds sit well in place, this creates a sound covering that reduces your environment noise and also prevents the device music from leaking out at the same. Beats Studio Buds driver unit is 8.2mm in diameter, the bigger the unit the more powerful, and can produce better bass.

A driver unit is the component that makes sound in the device, the unit size corellates with the sound made by the earbuds. The Beats Studio Buds's lowest frequency is at 20Hz, low-frequency response measures if and how well a particular audio component produces low frequencies that can be heard, and if it alters the signal on its way through. Beats Studio Buds's highest frequency is at 20,000Hz, high-frequency response indicates how well an audio component produces high audible frequencies and if it changes to the signal on its way through.

The sound pressure level, is the pressure level of sound, in decibels, dB, Beats Studio Buds's measurement is 100.5dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source. Beats Studio Buds's battery life is 8 hours, these last longer than 5 hours of listening which is considered average for a single charge.

A device's battery life is given by the manufacturer, and with longer battery life, you get to use it for longer and have to charge the device less often. This is given by the vendor, and the Beats Studio Buds's case is said to have a full charge of 16 hours. A charging case with a longer battery life enables you to recharge your earbuds on the go multiple times before recharging the case itself.

It takes 1.5 hours to fully charge the Beats Studio Buds's battery. It is highly adivsable to charge fully the battery before using the earbuds for the first time. Beats Studio Buds have a battery level indicator, an indicator alerts you when the earbuds has a low battery.

Its lights display the charging state of your earbuds and charging case. Beats Studio Buds support USB TYPE-C, an industry-standard connector for transmitting both data and power in a single cable. The Beats Studio Buds have Bluetooth version of 5.2, Bluetooth is a wireless technology standard that enables data transfers between devices placed in range, using short-wavelength, ultra-high frequency radio waves.

Beats Studio Buds have a 10meters distance connecting via Bluetooth. Beats Studio Buds support AAC, a codec that is used for Bluetooth audio. It supports 24-bit audio at 250kbps.

Since it uses psychoacoustic modeling, it can provide better results than other codecs at a similar bit rate.

Since its the highest quality codec that any Bluetooth-supporting Apple product supports, the Beats Studio Buds will work fine with your MacBook. If you are planning on using these with Android , ensure that they also support aptX HD, LDAC, or LHDC as well.

Beats Studio Buds have 6 microphones. Beats Studio Buds use a noise-canceling microphone, these microphones are intended to reduce noise from the earbuds' sound. Beats Studio Buds support ambient sound mode, which uses microphones to channel ambient noises so that they can still be heard even while wearing them When misplaced in a room, or can't be found in your bag, Beats Studio Buds support the find earbuds feature.

Beats Studio Buds support fast charging. Most often, technologies like Qualcomm’s Quick Charge, are used to reduce the amount of time it takes to charge a device. Beats Studio Buds support multipoint of 2 connections, this feature allows you to link to more than one Bluetooth device and switch between them.

Say, you can easily switch calls from one device to another without manually disconnect and reconnect. The Beats Studio Buds have a mute function, they have the feature to mute/unmute a conversation directly from the earbuds. With the Beats Studio Buds, so you can easily access the volume control, pause, play, mute, etc whichever features are supported on the device.

The Beats Studio Buds have voice prompts. Automatically receive information via audio messages, say if there is an issue with the connection. Beats Studio Buds come with a special pouch.

Carrying earphones openly, or placing them in your bag without a cover can easily put them at risk of getting damaged.