Bowers & Wilkins Px7 S2eSee price on Amazon
Overall Score 6.6 Represents average audio ecosystem compatibility score.
The Bowers & Wilkins Px7 S2e have a weight of 307g, these weigh below 320g, which we consider as the highest average a headphone should weigh for comfort during long use. We prefer a lower weight better because lighter devices are more comfortable to move with.
Detachable cables are cables that have connectors on both ends. One end goes into your headphone cups, while the other end is inserted into a source device. Some new headphones, and not just the expensive ones, are coming with detachable cables, Bowers & Wilkins Px7 S2e are one of those.
Twisted headphone cables can be a great source of annoyance and inconvenience, Bowers & Wilkins Px7 S2e's cable is designed to minimize tangling. Constant twisting of the cables can also lead to microfractures in the copper wires, affecting sound quality, or rendering your headphones defective.
By sweat resistance we mean that the wireless earbuds are protected in the presence of low-pressure water jets at any angle, this is determined by the IP Rating of the earbuds. Based on the ingress protection rating of the Bowers & Wilkins Px7 S2e they do have sweat resistance
A long cable ensures more freedom of movement, but remember that every cable based on the conducting material used has a certain amount of parasitic resistance, inductance, and capacitance. How much depends on the length and construction. Bowers & Wilkins Px7 S2e comes with a 1.2meters cable.
Over-ear headphones have larger earpads that fit around your entire ear Bowers & Wilkins Px7 S2e have a comfortable full-size form with earcups that fully enclose your ears. This design is loved for its increased sound isolation and the fact that it won't leak sound to your neighbors.
Bowers & Wilkins Px7 S2e have stereo speakers, what this means is that Bowers & Wilkins Px7 S2e's speakers deliver sound from separate channels on both left and right sides, this creates a richer sound and a better listening experience.
Active noise cancellation uses more advanced technology to reduce unwanted ambient sounds. How it works, it listens to the sound pattern outside and inside the earbud and then generates a mirror signal to cancel it out. In simple terms, it's like taking +1 outside (noise from your surrounding) and adding -1 inside (counter sound within the device) to make zero resulting in a reduced level of noise.
Bowers & Wilkins Px7 S2e allow you to listen at lower volume levels, causing less ear fatigue as you don't have to crank up the volume to overcome background noise.
Passive Noise Cancellation uses well-designed ear cups to seal out environment noise. This is used for both in-ear earphones and over-ear headphones where the headphone itself will keep surrounding noise out. The Bowers & Wilkins Px7 S2e sits tightly in place, creating an acoustic seal that reduces background noise and prevents your music from leaking out.
Low-frequency response measures if and how well a particular audio device reproduces low audible frequencies and if it makes any changes to the signal while at it. Bowers & Wilkins Px7 S2e's lowest frequency is at 10Hz, the lower the low-frequency response, the stronger and juicier the bass.
High frequency response measures if and how well an audio device reproduces high audible frequencies and if it makes any changes to the signal while at it. Bowers & Wilkins Px7 S2e's highest frequency is at 20,000Hz, the higher the high-frequency response, the clearer and crispier the treble.
The driver unit is the component that produces sound in the device, its size dictates the loudness of the headphone. Bowers & Wilkins Px7 S2e driver unit is 40mm in diameter, bigger drivers are more powerful and can produce better bass.
Defined as the device's resistance to the electromagnetic current, as electricity flows through a conductor, it faces electrical resistance that counters the flow of current. The resistance of a conductor is measured in ohms. Bowers & Wilkins Px7 S2e's impedance is 33Ohms, the lower the impedance, the easier it is to get higher volume and requires less power.
Neodymium magnets when used in audio devices produce a higher sensitivity and substantial sound output using less power to do so. They can help produce music at quite a high sound pressure level, SPL, with the use of high magnetic flux. The Bowers & Wilkins Px7 S2e have this type of magnet.
If your headphones play wirelessly, cancel ambient noise, or enhance your listening experience with active features, their battery life will reduce over time. The device's battery life is given by the manufacturer, with longer battery life, you get to use it for longer and have to charge the device less often. Bowers & Wilkins Px7 S2e's battery life is 30 hours
It takes 2 hours to fully charge the Bowers & Wilkins Px7 S2e's battery. It is recommended to fully charge the battery before using the headphones for the first time or when they have been unused for extended periods.
Bowers & Wilkins Px7 S2e have a battery level indicator, an indicator shows you when the device has a low battery. The battery indicator lights indicate the charging status of your headphones.
A rechargeable battery is a type of electrical battery that can be charged, discharged into a load, and recharged many times, as opposed to a disposable or primary battery, which is supplied fully charged and discarded after use. Bowers & Wilkins Px7 S2e's battery can be recharged and used over again.
Bowers & Wilkins Px7 S2e can be used wirelessly, wireless devices allow users more freedom of movement.
2.4GHz wireless is used for devices such as headsets such as the Bowers & Wilkins Px7 S2e, keyboards, and mice similar to Bluetooth but with a proprietary radio frequency. It typically offers better performance than Bluetooth, with low latency and good stability.
Bluetooth is a wireless technology standard that allows data transfers between devices placed in close proximity, using short-wavelength, ultra-high frequency radio waves. Bowers & Wilkins Px7 S2e has a v5.2
Bowers & Wilkins Px7 S2e support USB TYPE-C, an industry-standard connector for transmitting both data and power on a single cable. The USB-C plug is now part and parcel of most current laptops, phones, and tablets, it features reversible plug orientation and cable direction.
The Bowers & Wilkins Px7 S2e support APTX HD, an audio codec for Bluetooth devices that are developed by Qualcomm. It supports high-quality 24-bit audio (at a bit rate of 576kbps).
Bowers & Wilkins Px7 S2e support APTX, a codec used for transmitting audio wirelessly with Bluetooth. It is developed by Qualcomm and supports 16-bit audio at a bit rate of 384kbps.
Bowers & Wilkins Px7 S2e support AAC, a codec that is used for Bluetooth audio. It supports 24-bit audio at 250kbps. Because it uses psychoacoustic modeling, it can provide better results than other codecs at a similar bit rate.
Bluetooth is a short-range wireless technology standard that is used for exchanging data between fixed and mobile devices over short distances. The Bowers & Wilkins Px7 S2e can connect at a 10meters distance via Bluetooth or infrared to another device.
Being an industry standard audio plug, a standard 3.5mm male connector is suitable for use with all MP3 players and computer sound cards. This means that it is commonly used in stereo headphones to your phone or connecting your phone to an external amplifier, sound bars, your car radio, etc. Bowers & Wilkins Px7 S2e has this connector giving it a wider range of connectivity with most of the sound devices out there. All plugs have at least a tip and sleeve with the number of rings that stand as a differentiating factor.
Bowers & Wilkins Px7 S2e have only 6 microphones, more microphones result in better sound quality and enable the device to filter out background noise.
Bowers & Wilkins Px7 S2e use a noise-canceling type of microphone, these microphones are designed to filter out background noise from the desired sound. Especially useful in noisy environments.
Bowers & Wilkins Px7 S2e support ambient sound mode, which uses microphones to pass through ambient noises so that they can still be heard. It’s useful when you want to listen to music but also be aware of what’s happening around you, for example when you’re having a jog but would still want to be able to hear traffic.
Bowers & Wilkins Px7 S2e support in/on-ear detection, the sensors in the device can detect when they are removed from your ears so that the music is paused, saving battery life and improving your listening experience while at it.
Bowers & Wilkins Px7 S2e support multipoint, which allows you to link to more Bluetooth devices and switch between them. For example, you can easily switch calls from one device to another without having to manually disconnect and reconnect.
There is a control panel on the Bowers & Wilkins Px7 S2e body, so you can easily access the volume control or remote without having to interact with a cable or another device it's connected to.
Bowers & Wilkins Px7 S2e can be used as a headset. A headset is one headphone or pair with a built-in microphone. Headsets can be used for apps that require communication i.e. Zoom, Google Meet, Skype, games with voice chat, mobile phones, etc.
The period of time that warrant free repair and adjustment services in case of a malfunction occurring under normal use that has followed instruction manuals. When covered under the manufacturer’s warranty it is possible to get a replacement in the case of a malfunction. Bowers & Wilkins Px7 S2e have a warranty period of 1 years