JBL Endurance PeakSee price on Amazon
Overall Score 5.1 Represents average audio ecosystem compatibility score.
Ingress protection ratings refer to the rating of protection given by an enclosure, against dust and water. The letters 'IP' are followed by two values The first value means protection against solids say dust, followed by the one that refers to resistance against liquids (water).
Scoring IPX7, the JBL Endurance Peak's rating is read as, the first value of X denotes that no data available to specify a protection rating, and the second value of 7 means that they are protected against temporary immersion in water under set conditions, say 1 metre for 30 minutes.
JBL Endurance Peak have a weight of 30g . We prefer a lower weight better because lighter devices are more comfortable to transport.
For a device to be true wireless it should have no wires connecting any part of the device together, JBL Endurance Peak are true wireless for this case since they don't have wires. This is a key difference since wireless earbuds have wires connecting the 2 earbuds together.
JBL Endurance Peak have wingtips, these are reserved for earbuds for workouts and are usually an optional add-on to each silicone ear tip for a better fit.
JBL Endurance Peak have sweat resistance
The JBL Endurance Peak are both dustproof and water-resistant.
An earbud foam is made to be ultracompact and lightweight, with almost no interference with earrings, spectacles, hats, or hairstyles. The JBL Endurance Peak have an earbud foam for some people it is more comfortable than the in-ear foam.
JBL Endurance Peak have stereo speakers, devices with stereo speakers deliver sound from separate channels on both left and right sides, creating a richer sound and a better listening experience.
ANC utilises advanced technology to reduce unwanted ambient sounds. How it works, it detects and analyzes the sound pattern of incoming noise and after generates a mirror signal to cancel it out. Simply put, it's like taking +1 (sound from your surrounding) and adding -1 (inverted noise) to make zero therefore "diluting" the noise.
JBL Endurance Peak have Active Noise Cancellation allowing you to listen at lower volume levels, good for your ears since you don't have to crank up the device volume to outcompete background sounds.
JBL Endurance Peak have a unit size of 10mm in diameter, bigger drivers are more powerful, and can produce better bass. A driver unit is basically a mini speaker that makes sound in the earbuds, the unit size determines the loudness of the device.
JBL Endurance Peak's lowest frequency is at 16Hz, low-frequency response measures if and how well an audio component produces low frequencies that can be heard, and if it makes any changes to the signal on its way through.
The JBL Endurance Peak's highest frequency is at 22000Hz, high-frequency response shows how well an audio component makes high audible frequencies and if it makes any adjustments to the signal while at it.
The JBL Endurance Peak's battery life is 4 hours, these last less than 5 hours of listening which is considered average before recharge. A device's battery life is commonly given by the manufacturer, and with longer battery life, you get to use it for longer and have to charge the device less often.
The battery life of the charging case is given by the manufacturer, and JBL Endurance Peak's case has a full charge of 24 hours. A charging case with more battery hours allows you to recharge your earbuds on the go several times before having to recharge the case itself.
It requires 2 hours to fully charge the JBL Endurance Peak's battery. It is recommended to fully charge the battery before using the earbuds when they have been unused for long periods.
JBL Endurance Peak's battery power is 75mAh, battery capacity, shows the amount of electrical energy that a battery can store.
The JBL Endurance Peak have a battery level indicator, an indicator notifies you when the device has a low battery. Its lights show the charging status of your device and case.
The JBL Endurance Peak have Bluetooth version of 4.2, Bluetooth is a wireless technology standard that enables data movement between devices placed in close proximity, using short-wavelength, ultra-high frequency radio waves.
The JBL Endurance Peak have a 10meters distance to connect via Bluetooth.
The JBL Endurance Peak have 1 microphones.
The JBL Endurance Peak, so you can access the volume control, pause, play, mute, etc whichever functions are supported on the device.
JBL Endurance Peak have a warranty period of 1 Years, the period of time that warrant free repair and adjustment services in case of a malfunction occurring under normal use following instruction manuals.
JBL Endurance Peak support voice prompts. Automatically receive information through audio messages, say if there is an issue with the connection.
JBL Endurance Peak come with a special pouch. Carrying earphones without a case, or placing them inside your bag without a cover may easily damage them.