Overall Score 5.7 Represents average audio ecosystem compatibility score.
Ingress protection ratings is the level of protection offered by an enclosure, against dust and liquids. The letters 'IP' are followed by two values The first value of the IP rating refers to protection against solids such as dust, while the second refers to resistance against liquids (sweat).
Having a value of IPX7, the JBL Endurance Peak 2's rating is read as, the first value of X denotes that no data available to specify a protection rating, and of liquids that they are protected against temporary immersion in water under set conditions, say 1 metre for 30 minutes.
JBL Endurance Peak 2 have a weight of 26g . We consider a lower weight best for the reason that lighter devices are more comfortable to move with.
For a device to be true wireless it must have no wires connecting any part of the device together, JBL Endurance Peak 2 are true wireless for this matter since they have no cables. This is a key difference as some wireless earbuds have wires linking the 2 earbuds together.
The JBL Endurance Peak 2 come with wingtips, these are reserved for earbuds for workouts and are usually an optional add-on to each silicone ear tip for a more secure fit.
JBL Endurance Peak 2 are resistant to sweat
JBL Endurance Peak 2 have stereo speakers, what this means is that JBL Endurance Peak 2's speakers deliver sound from separate channels on both left and right sides, this creates a richer sound and a better listening experience.
JBL Endurance Peak 2 stay tightly in place, this creates an acoustic seal that reduces your environment sounds and also prevents the device voice audio from leaking out .
JBL Endurance Peak 2 driver unit is 10mm in diameter, the bigger the unit the more powerful, and can produce better bass. The driver unit is the component that produces sound in the device, the unit size corellates with the loudness of the earbuds.
The JBL Endurance Peak 2's lowest frequency is at 20Hz, low-frequency response inidcates how well a particular audio device produces low frequencies that can be heard, and if it alters the signal while at it.
JBL Endurance Peak 2's highest frequency is at 20000Hz, high-frequency response tells how well an audio device produces high recognizable frequencies and if it changes to the signal on its way through.
The sound pressure level, is the level of pressure of sound, in decibels, dB, JBL Endurance Peak 2's measurement is 93dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source.
JBL Endurance Peak 2's battery life is 6 hours, a device's battery life is usually given by the manufacturer, and with more battery hours, you get to use it for longer and requires fewer chanrgings.
This is given by the vendor, and JBL Endurance Peak 2's case is said to have a full charge of 24 hours. A charging case with more battery hours allows you to recharge your earbuds on the go multiple times before having to recharge the case itself.
It takes 2 hours to fully charge the JBL Endurance Peak 2's battery. It is highly adivsable to fully charge the battery before using the earbuds when they have been unused for extended periods.
JBL Endurance Peak 2's battery capacity is 60mAh, battery capacity, shows the amount of electrical energy that a battery can store.
The JBL Endurance Peak 2 have a battery level indicator, an indicator alerts you when the earbuds has a low battery. The battery indicator lights display the charging status of your earbuds and charging case.
JBL Endurance Peak 2 support USB TYPE-C, a standard connector for transmitting both data and power in a single cable.
The JBL Endurance Peak 2 have Bluetooth version of 5, Bluetooth is a wireless technology standard that allows data transfers between devices placed in range, using short-wavelength, ultra-high frequency radio waves.
JBL Endurance Peak 2 have a 10meters distance connecting via Bluetooth.
JBL Endurance Peak 2 support AAC, a codec that is used for Bluetooth audio. It supports 24-bit audio at 250kbps. Because it uses psychoacoustic modeling, it provides better results than other codecs at the same bit rate.
Since its the highest quality codec that any Bluetooth-supporting Apple product supports, the JBL Endurance Peak 2 will work well with your MacBook. If you intend on using these with Android you need to pay even closer attention to codec support for if they only have AAC they won't provide the best audio quality possible, ensure that they also support aptX HD, LDAC, or LHDC as well.
JBL Endurance Peak 2 microphone sensitivity is measured at -38dBV/Pa. The vastness of the analog or digital output signal from the microphone with its input stimulus is a measure of its sensitivity. It's the 'loudness' of the voice that the earbud microphone can pick up.
The JBL Endurance Peak 2 support fast charging. Most often, technologies like MediaTek’s Pump Express, are used to lower the amount of time it takes to charge the earbuds.
The JBL Endurance Peak 2, so you can access the volume control, pause, play, mute, etc whichever functions are supported on the device.
The JBL Endurance Peak 2 have a warranty period of 1 Years, the period of time that warrant free repair and adjustment services in case of a malfunction occurring under normal use following instruction manuals.
The JBL Endurance Peak 2 have voice prompts. Automatically receive information through audio messages, say if there is a problem with the connection.
JBL Endurance Peak 2 come with a special case. Carrying earbuds without a case, or placing them inside your bag without a casing may easily put them at risk of getting damaged.