Overall Score 6.0 Represents average audio ecosystem compatibility score.
Ingress protection ratings is the level of protection offered by a casing, against solids and water. The letters 'IP' are followed by two values The first value refers to protection against solids say dust, followed by the one that refers to protection against liquids (water).
Having a value of IPX5, the JBL LIVE 300's rating for solids indicates that no data available to specify a protection rating, and of liquids that they can withstand medium pressure jet that's 6.3mm diameter, similar to garden hose from any angle for 3 minutes at a distance of 2.5 to 3 metres.
JBL LIVE 300 have a weight of 65.7g . We consider a lower weight better because lighter devices are more comfortable to move with.
For a device to be true wireless it should have no wires linking any part of the device together, JBL LIVE 300 are true wireless for this case since they don't have wires. This is a key difference as some wireless earbuds have cables linking the pair of earbuds together.
JBL LIVE 300 are resistant to sweat
The earbud foam is made to be ultracompact and lightweight, with almost no interference with earrings, spectacles, hats, or hairstyles. The JBL LIVE 300 have an earbud foam for some people it is more comfortable than the in-ear foam.
JBL LIVE 300 have stereo speakers, devices with stereo speakers deliver sound from independent channels on both left and right sides, this creates a richer sound and a better listening experience.
JBL LIVE 300 sit well in place, this creates an acoustic seal that tones down background sounds well as preventing the device voice audio from leaking out at the same.
JBL LIVE 300 have a unit size of 5.8mm in diameter, the bigger the unit the more powerful, therefor producing better bass. The driver unit is basically a mini speaker that produces sound in the device, its size corellates with the sound produced by the earbuds.
The JBL LIVE 300's lowest frequency is at 20Hz, low-frequency response measures if and how well an audio component produces low frequencies that can be heard, and if it alters the signal while at it.
JBL LIVE 300's highest frequency is at 20000Hz, high-frequency response indicates how well a particular audio component makes high recognizable frequencies and if it makes any changes to the signal on its way through.
The sound pressure level, is the level of pressure of sound, measured in decibels, dB, JBL LIVE 300's measurement is 95dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source.
JBL LIVE 300's battery life is 6 hours, these last longer than 5 hours of listening which is considered average for a single charge. A device's battery life is usually given by the manufacturer, and with longer battery life, you get to use it for longer and requires fewer chargings.
This is given by the vendor, and JBL LIVE 300's case has a full charge of 14 hours. A charging case with more battery hours allows you to recharge your earbuds on the go several times before having to recharge the case itself.
It requires 2 hours to fully charge the JBL LIVE 300's battery. It is recommended to charge fully the battery before using the earbuds when they have been in storage for long periods.
JBL LIVE 300's battery power is 60mAh, battery capacity, shows the amount of electrical energy that a battery can keep.
JBL LIVE 300 have a battery level indicator, an indicator notifies you when the device has a low battery. Its lights indicate the charging status of your earbuds and charging case.
The JBL LIVE 300 support USB TYPE-C, a standard connector for transmitting both data and power in a single cable.
JBL LIVE 300 have Bluetooth version of 5, Bluetooth is a wireless technology standard that enables data transfers between devices placed in range, using short-wavelength, ultra-high frequency radio waves.
JBL LIVE 300 have a 10meters distance to connect via Bluetooth.
JBL LIVE 300 support AAC, a codec used for Bluetooth audio. It supports 24-bit audio at 250kbps. Because it uses psychoacoustic modeling, it provides better results than other codecs at a similar bit rate.
Being the highest quality codec that any Bluetooth-supporting Apple product supports, the JBL LIVE 300 will work fine with your iPad. If you are planning on using these with Android , ensure that they also support aptX HD, LDAC, or LHDC as well.
JBL LIVE 300 support ambient sound mode, which uses microphones to pass through ambient sound to still be heard even when wearing them
The JBL LIVE 300 have in/on-ear detection, the sensors in the device can detect when they are removed from your ears .
The JBL LIVE 300 support fast charging. Usually, technologies like MediaTek’s Pump Express, are used to reduce the amount of time it takes to fully charge the earbuds.
The JBL LIVE 300 have a mute function, they have the feature to mute/unmute a conversation directly from the earbuds.
The JBL LIVE 300, so you can access the volume control, pause, play, mute, etc whichever functions are supported on the device.
The JBL LIVE 300 have voice prompts. Automatically receive information through audio messages, like if there is an issue with the connection.
The JBL LIVE 300 come with their own special pouch. Carrying earbuds openly, or placing them inside your pockets without a casing may easily put them at risk of getting damaged.