The JBL Tune 760NC have a weight of 220g, these weigh below 320g, which we consider as the highest average a headphone should weigh for comfort during long use. We consider a lower weight best because lighter devices are more comfortable to move with. Detachable cables are cables that have connectors on both ends.
One end goes into your headphone earpieces, while the other end is inserted into an audio source. Some new headphones, and not just the expensive ones, are coming with detachable cables, JBL Tune 760NC are one of those. JBL Tune 760NC are foldable, which makes them more portable.
Foldable headphones are easier to transport and take up less storage space. Twisted headphone cables can be a great source of annoyance and inconvenience, JBL Tune 760NC's cable is designed to minimize tangling. Constant twisting of the cables can also lead to bends in the copper wires, affecting sound quality, or
rendering your headphones defective.
Over-ear headphones have larger earpads that fit around your entire ear JBL Tune 760NC have a comfortable full-size form with earcups that fully enclose your ears. This design is loved for its increased sound isolation and the fact that it won't leak sound to your neighbors. JBL Tune 760NC have stereo speakers, devices with stereo speakers deliver sound from independent channels on both left and right sides, this creates a richer sound and a better listening experience.
Active noise cancellation uses more advanced technology to actively counter noise. How it works, it detects and analyzes the sound pattern outside and inside the earbud and then generates a mirror signal to cancel it out. In simple terms, it's like taking +1 outside (noise from your surrounding) and adding -1 inside (counter sound within the device) to make 0 resulting in a reduced level of noise.
JBL Tune 760NC allow you to listen at lower volume levels, causing less ear fatigue as you don't have to crank up the volume to overcome background noise. Passive Noise Cancellation uses well-designed ear cups to seal out unwanted noise. This is used for both in-ear earphones and over-ear headphones where the headphone itself will keep surrounding noise out.
The JBL Tune 760NC sits tightly in place, creating an acoustic seal that reduces background noise and prevents your music from leaking out. Low-frequency response measures if and how well an audio component reproduces low audible frequencies and if it makes any changes to the signal while at it. JBL Tune 760NC's lowest frequency is at 20Hz, the lower the low-frequency response, the stronger and juicier the bass.
High frequency response measures if and how well an audio component reproduces high audible frequencies and if it makes any changes to the signal on the way through. JBL Tune 760NC's highest frequency is at 20,000Hz, the higher the high-frequency response, the clearer and crispier the treble. Sound pressure is the average variation in atmospheric pressure caused by the sound, the sound level .i.e how loud something is can be perceived differently by different people so we need to have the means to get an objective measurement of sound level expressed in numerical terms.
The sound pressure level, SPL, is the pressure level of a sound, measured in decibels, dB, JBL Tune 760NC's measurement is 103dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source. The driver unit is the component that produces sound in the device, its size dictates the loudness of the headphone.
JBL Tune 760NC driver unit is 40mm in diameter, bigger drivers are more powerful and can produce better bass. Impedance is the device's resistance to the electromagnetic current, as electricity flows through a conductor, it experiences electrical resistance that counters the flow of current. The resistance of a conductor is measured in ohms.
JBL Tune 760NC's impedance is 32Ohms, the lower the impedance, the easier it is to get higher volume and requires less power. If your headphones play wirelessly, cancel ambient noise, or enhance your listening experience with active features, their battery life will reduce over time. The device's battery life is given by the manufacturer, with longer battery life, you get to use it for longer and have to charge the device less often.
JBL Tune 760NC's battery life is 50 hours
It takes 2 hours to fully charge the JBL Tune 760NC's battery. It is recommended to fully charge the battery before using the headphones for the first time or when they have been unused for extended periods. JBL Tune 760NC have a battery level indicator, an indicator shows you when the device has a low battery.
The battery indicator lights indicate the charging status of your headphones. A rechargeable battery is a type of electrical battery that can be charged, discharged into a load, and recharged many times, as opposed to a disposable or primary battery, which is supplied fully charged and discarded after use. JBL Tune 760NC's battery can be recharged and used over again.
JBL Tune 760NC can be used wirelessly, wireless devices allow you more freedom of movement. Bluetooth is a wireless technology standard that allows data transfers between devices placed in close proximity, using short-wavelength, ultra-high frequency radio waves. JBL Tune 760NC has a v5
JBL Tune 760NC support USB TYPE-C, an industry-standard connector for transmitting both data and power on a single cable.
The USB-C plug is now part and parcel of most current laptops, phones, and tablets, it features reversible plug orientation and cable direction. Being an industry standard audio plug, a standard 3.5mm male connector is suitable for use with all MP3 players and computer sound cards. This means that it is commonly used in stereo headphones to your phone or connecting your phone to an external amplifier, sound bars, your car radio, etc.
JBL Tune 760NC has this connector giving it a wider range of connectivity with most of the sound devices out there. All plugs have at least a tip and sleeve with the number of rings that stand as a differentiating factor. JBL Tune 760NC have only 1 microphones, more microphones result in better sound quality and enable the device to filter out background noise.
JBL Tune 760NC have a mute function, they have an option to mute/unmute a conversation directly from the device. The mute function means that you unilaterally turn off the microphone, but you can still hear the other party's voice. JBL Tune 760NC support multipoint, which allows you to link to more Bluetooth devices and switch between them.
For example, you can easily switch calls from one device to another without having to manually disconnect and reconnect. There is a control panel on the JBL Tune 760NC body, so you can easily access the volume control or remote without having to interact with a cable or another device it's connected to. JBL Tune 760NC can be used as a headset.
A headset is one headphone or pair with a built-in microphone. Headsets can be used for apps that require communication i.e. Zoom, Google Meet, Skype, games with voice chat, mobile phones, etc.
