Volume is the quantity of three-dimensional space taken up by the product's chassis or, in simpler terms, the space the product fills. DemerBox DB2 takes up 12,150cm³, it is a good thing to know the space that the speaker takes up just so as to ensure that it will easily fit in the available space next to your other gadgets. Harman Kardon Onyx Studio 5's volume is 10,578.43cm³ meaning it
requires lesser space than the DemerBox DB2 by cm³
We prefer a lower weight best because lighter devices are more comfortable to carry.
A lower weight is also an advantage for home appliances, as it makes transportation easier, and for many other types of products. The Harman Kardon Onyx Studio 5, at 2,980g
is lighter than the DemerBox DB2 with a difference g. Most of the time a genuine quality system is a little bit heavier than average quality products though If you want to change the position of the soundbar after some time, then you should opt to purchase a lighter soundbar.
The height represents the vertical dimension of a device, DemerBox DB2 has a height of 250mm. The Harman Kardon Onyx Studio 5, at 284mm
is longer in height than the DemerBox DB2 with a difference 34mm
This represents the horizontal dimension of a device, DemerBox DB2 has a width of 270mm. The Harman Kardon Onyx Studio 5, at 291mm
is wider than the DemerBox DB2 by 21mm
The thickness (or depth) of DemerBox DB2 is 180mm, to know the thickness of the speaker you divide its volume(space occupied) by the surface area( length by width)
Harman Kardon Onyx Studio 5 has a thickness of 128mm,
meaning that it is less thicker than the DemerBox DB2 by -52mm
DemerBox DB2 has stereo speakers, devices with stereo speakers deliver sound from separate channels on both left and right sides, this creates a richer sound and a better listening experience.
A speaker driver is an individual transducer that converts electrical energy to sound waves. Drivers come in different sizes and modes, but generally, you'll find three types: tweeter driver, which handles the high-frequency treble range (above 2,000 Hz), and midrange driver: which handles the midrange frequencies (200 Hz to 2,000 Hz). Woofer driver: handles the low-frequency bass range (below 200 Hz).
Based on the frequencies they handle more drivers may result in better sound quality, DemerBox DB2 has 2 only. Harman Kardon Onyx Studio 5 has 1 only
A passive radiator is a type of driver in speakers that can get extra power and resonance from a speaker system, usually used in smaller speaker systems.
This radiator is called passive because it is not powered by electricity but by air pressure found in speaker cones.
The sound vibrations produced by a passive radiator depend on its mass and the size of its enclosure. It is usually used in combination with a woofer to produce deep, resonant tones that would normally be produced by speakers in large boxes powered by AC.
The Harman Kardon Onyx Studio 5 and DemerBox DB2 both have a passive radiator
The audio output power of a device is based on the number of speakers and their power in watts DemerBox DB2 has 20W, this is the amount of power the speakers can be loaded with "comfortably".
A higher audio output power results in louder, clearer sounds though this is not the sole factor determining the device's loudness. To better understand how loud any speaker can get, there are other features to factor in such as sensitivity, sound pressure, etc. Harman Kardon Onyx Studio 5 has an audio output power of 50W
Your speaker's battery life will reduce over time while in use, the battery life is given by the manufacturer, and with longer battery life, you get to use it for longer and have to charge the device less often.
DemerBox DB2's battery life is 40 hours
Harman Kardon Onyx Studio 5's battery life is 8 hours. Each time you recharge your device, it gets a little less listening time. The effect is barely noticeable at first.
But over a few years, you may find that your speaker, no longer plays for long like it used to. It takes 4 hours to fully charge the DemerBox DB2's battery. It is recommended to fully charge the battery before using it for the first time or when they have been unused for extended periods.
Harman Kardon Onyx Studio 5 takes 5 hours to fully charge the battery
DemerBox DB2 has a battery level indicator, an indicator shows you when the device has a low battery. The battery indicator lights show the charging status of your speaker. Harman Kardon Onyx Studio 5 too has a battery level indicator, charging indicators allow you to determine the charging state of your speaker, whether fully charged, or the battery is running low.
DemerBox DB2 support multipoint, which allows you to link to more Bluetooth devices and switch between them. For example, you can easily switch calls from one device to another without having to manually disconnect and reconnect. The Harman Kardon Onyx Studio 5 support multipoint count.
Bluetooth multipoint would come in handy because you can be on one call without missing notifications coming from another device. DemerBox DB2 can be used wirelessly, wireless devices allow users more freedom of movement. An auxiliary input allows you to play other audio sources by connecting them through a simple audio connection like a 3.5mm jack
Bluetooth is a wireless technology that allows you to easily transfer data between different devices, such as smartphones, tablets, and computers.
Both the Harman Kardon Onyx Studio 5 and the DemerBox DB2 have Bluetooth
Bluetooth is a short-range wireless technology standard that is used for exchanging data between fixed and mobile devices over short distances. The DemerBox DB2 can connect at a 10meters distance via Bluetooth or infrared to another device. With more USB ports, you are able to connect more devices, like those you save your music on, DemerBox DB2 has 1 only
Harman Kardon Onyx Studio 5 has 1 USB ports
You can use your smartphone as a remote control for the device through a dedicated app.
Through this, you can customize settings, unlock features, and get real-time updates so you can always listen to your music the best way you see fit. With voice prompts, the device notifies you via audio messages, say its battery is running low it will notify you that it's time to recharge the device. There is a control panel on the DemerBox DB2 body, so you can easily access the volume control or remote without having to interact with a cable or another device it's connected to.
The Harman Kardon Onyx Studio 5 too have a control panel on them.
