JBL Wave Beam
See price on AmazonOverall Score 6.8 Represents average audio ecosystem compatibility score.
JBL Endurance Peak 3
See price on AmazonOverall Score 6.5 Represents average audio ecosystem compatibility score.
Category | Features | JBL Wave Beam | JBL Endurance Peak 3 |
---|---|---|---|
DESIGN | ingress protection (ip) rating | IP54 | IP68 |
weight | 8.8g | 25g | |
has no wires or cables | ✓ | ✓ | |
wingtips included | ✗ | ✓ | |
sweat resistance | ✓ | ✓ | |
has stereo speakers | ✓ | ✓ | |
SOUND QUALITY | has active noise cancellation (noise control) | ✓ | ✗ |
has passive noise reduction | ✓ | ✓ | |
driver unit size | 8mm | 10mm | |
lowest frequency | 20Hz | 20Hz | |
highest frequency | 20,000Hz | 20,000Hz | |
sound pressure level | 100dB/mW | 102dB/mW | |
POWER | battery life | 8hours | 10hours |
battery life of charging case | 24hours | 40hours | |
charge time | 2hours | 2hours | |
has a battery level indicator | ✓ | ✓ | |
CONNECTIVITY | has usb type-c | ✓ | ✓ |
bluetooth version | v5.2 | v5.2 | |
maximum bluetooth range | 10meters | 10meters | |
has aac | ✗ | ✓ | |
MICROPHONE | number of microphones | 2only | 4only |
has a noise-canceling microphone | ✓ | ✗ | |
EXTRAS | has ambient sound mode | ✓ | ✓ |
has find earbuds feature | ✓ | ✓ | |
supports fast charging | ✓ | ✗ | |
has a mute function | ✓ | ✓ | |
control panel placed on a device | ✓ | ✓ | |
has voice prompts | ✓ | ✓ | |
travel bag is included | ✓ | ✓ | |
See price on Amazon | See price on Amazon |
Ingress protection ratings refer to the level of protection offered by an enclosure, against solids and liquids. In the format of IPXX, 'X' represents a number The first value means protection against solids say dust, while the second refers to resistance against liquids (water).
Scoring IP68, the JBL Endurance Peak 3's rating is read as, the first number of 6 denotes that they are completely dust proof, and the second number of 8 means that they are protected against the effects of continuous immersion in water, ingress of water in quantities causing harmful effects shall not be possible. Conditions should be more severe than for numeral 7..
In comparison to the JBL Endurance Peak 3, JBL Wave Beam have a rating of IP54 meaning that
JBL Endurance Peak 3 has a higher dust resistance than JBL Wave Beam
and that of liquids is that,
JBL Wave Beam has a lower liquid rating than JBL Endurance Peak 3
JBL Endurance Peak 3 have a weight of 25g . We take in account a lower weight better for the reason that lighter devices are easier to carry.
The JBL Wave Beam, at 8.8g
are lighter than the JBL Endurance Peak 3 by -16.2g
For a device to be true wireless it must have no wires linking any part of the device together, JBL Endurance Peak 3 are true wireless for this case since they have no cables. This is an important distinction as some wireless earbuds have cables linking the 2 earbuds together.
JBL Wave Beam also is true wireless because it has no cables connecting the pair of earbuds together.
JBL Endurance Peak 3 have wingtips, these are commonly used for workout earbuds and are usually an optional add-on to the separate silicone ear tip for a better fit.
JBL Endurance Peak 3 are resistant to sweat
JBL Wave Beam's resistance to sweat makes both devices ideal for use while doing sports such as long-distance running, marathons, training in workout bodysuits, etc
JBL Endurance Peak 3 have stereo speakers, devices with stereo speakers deliver sound from independent channels on both left and right sides, creating a richer sound and a better listening experience.
Both JBL Wave Beam and JBL Endurance Peak 3 have stereo speakers
ANC makes use of more advanced technology to reduce ambient sounds. ANC works when, it listens to the sound pattern outside and inside the earbud and then inverts the soundwaves to counter it. In simple terms, it's like having +1 (sound from your surrounding) and producing -1 (inverted noise) giving 0 resulting in a reduced level of noise.
JBL Wave Beam have ANC allowing you to listen at lower volume levels, causing less ear fatigue as you don't have to crank up the earbuds volume to overcome background noise.
JBL Endurance Peak 3 sit well in place, creating a sound seal that tones down background sounds and also prevents the device voice audio from leaking out at the same.
Both of these devices have passive noise reduction which implies that both reduce ambient noise without using ANC to cancel it out.
The JBL Endurance Peak 3 have a unit size of 10mm in diameter, bigger drivers are more powerful, and can produce better bass.
A driver unit is basically a mini speaker that produces sound in the earbuds, its size dictates the loudness of the device.
JBL Wave Beam driver unit is 8mm in diameter,
which means that they have a smaller driver unit than that of JBL Endurance Peak 3 by 2mm
, many people have a misconception that driver units of a bigger size automatically produce better sound quality.
However, large drivers find it difficult to produce high frequencies so yeah, larger drivers can generate louder sound, but this does not mean that they produce better quality sound.
The JBL Endurance Peak 3's lowest frequency is at 20Hz, low-frequency response measures if and how well an audio device produces low audible frequencies and if it makes any changes to the signal on its way through.
JBL Wave Beam's lowest frequency is at 20Hz, this implies that
both devices can produce equal bass
The JBL Endurance Peak 3's highest frequency is at 20,000Hz, high-frequency response shows how well a particular audio device produces high audible frequencies and if it makes any changes to the signal while at it.
JBL Wave Beam's highest frequency is at 20,000Hz, this means that
both devices can generate equal treble
The sound pressure level, is the pressure level of sound, measured in decibels, dB, JBL Endurance Peak 3's measurement is 102dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source.
JBL Wave Beam's sound pressure level measurement is 100dB/mW. How loud a device is can be perceived differently by different people, so we need to have the means to get an objective measurement of sound level expressed in numerical terms.
The JBL Endurance Peak 3's battery life is 10 hours, these last longer than 5 hours of listening which is considered average for a single charge. A device's battery life is given by the manufacturer, and with longer battery life, you get to use it for longer and have to charge the device less often.
JBL Wave Beam's battery life is
less than that of JBL Endurance Peak 3 by 2 hours
. Every time you recharge your earbuds, they get a little less listening time. The effect is barely noticeable at first, but over time, your wireless earbuds will no longer play for long like they used to.
This is given by the manufacturer, and JBL Endurance Peak 3's case is said to have a charge of 40 hours. A charging case with more battery hours allows you to recharge your earbuds on the go several times before having to recharge the case itself.
JBL Wave Beam's charging case has a battery life of 24 hours,
less than that of JBL Endurance Peak 3 by 16 hours
It takes 2 hours to fully charge the JBL Endurance Peak 3's battery. It is recommended to charge fully the battery before using the earbuds when they have been unused for extended periods.
JBL Wave Beam takes 2 hours to fully charge the battery,
equal to that of the JBL Endurance Peak 3
The JBL Endurance Peak 3 have a battery level indicator, an indicator shows you when the earbuds has a low battery. Its lights display the charging state of your earbuds and case.
JBL Wave Beam too have a battery level indicator, charging indicators enable you to tell the charging state of your device, if charged fully, or the battery is running low.
JBL Endurance Peak 3 have USB TYPE-C, a standard connector for transmitting both data and power in a single cable.
JBL Wave Beam too support USB TYPE-C. This USB-C plug is part and parcel of most current electronics.
JBL Endurance Peak 3 have Bluetooth version of 5.2, Bluetooth is a wireless technology standard that enables data transfers between devices placed in close proximity, using short-wavelength, ultra-high frequency radio waves.
JBL Wave Beam has a Bluetooth version of 5.2,
equal to that of the JBL Endurance Peak 3
. Newer versions provide faster data transfers.
JBL Endurance Peak 3 have a 10meters distance to connect via Bluetooth.
JBL Wave Beam have a maximum range of 10meters,
equal to that of the JBL Endurance Peak 3
JBL Endurance Peak 3 support AAC, a codec used for Bluetooth audio. It supports 24-bit audio at 250kbps. Because it uses psychoacoustic modeling, it can provide better results than other codecs at a similar bit rate.
Since its the highest quality codec that any Bluetooth-supporting Apple product supports, the JBL Endurance Peak 3 will work well with your iPhone. If you intend on using these with Android you need to pay even closer attention to codec support for if they only have AAC they won't provide the best audio quality possible, ensure that they also support aptX HD, LDAC, or LHDC as well.
The JBL Endurance Peak 3 have 4 microphones.
While the JBL Wave Beam microphones are 2,
less than that of JBL Endurance Peak 3 by 2
. More microphones record better sound quality and help the device to filter out noise.
JBL Wave Beam use a noise-canceling type of microphone, these microphones are made to reduce noise from the desired sound.
The JBL Endurance Peak 3 support ambient sound mode, which uses microphones to channel ambient noises to still be heard even when wearing the earbuds
The JBL Wave Beam support ambient sound mode as well, it’s useful when you want to listen to music while being aware of what’s happening around you, for example when you’re having a run but would still want to be able to hear traffic.
When lost in a room, or can't easily find them in your bag, the JBL Endurance Peak 3 support the find earbuds feature.
The JBL Wave Beam too have the find earbuds feature. You can use the device app on your phone to play a sound from your device to help you locate them.
The JBL Wave Beam support fast charging. Commonly, technologies like Qualcomm’s Quick Charge, are used to reduce the time it takes to fully charge the earbuds.
The JBL Endurance Peak 3 have a mute function, they have the feature to mute/unmute a conversation directly from the earbuds.
The JBL Wave Beam also support the mute function. It means that you unilaterally turn off the earbuds' microphone, but you can still hear the other party's voice.
The JBL Endurance Peak 3, so you can access the volume control, pause, play, mute, etc whichever functions are supported on the device.
JBL Wave Beam also have a control panel on them.
JBL Endurance Peak 3 have voice prompts. With voice prompts, you receive information through audio messages, like if there is a problem with the connection.
The JBL Wave Beam too support voice prompts meaning the earbuds notifies you if the battery is running low, and you need to recharge them.
JBL Endurance Peak 3 come with a special case. Carrying earphones openly, or putting them inside your bag without a casing can easily damage them.
JBL Wave Beam too have a travel bag included, which offers safe transportation.