Sony WH 1000XM4See price on Amazon
Overall Score 6.2 Represents average audio ecosystem compatibility score.
JBL Tour ONE M2See price on Amazon
Overall Score 6 Represents average audio ecosystem compatibility score.
|Category||Features||JBL Tour ONE M2||Sony WH 1000XM4|
|has a detachable cable||✓||✓|
|can be folded||✓||✓|
|has a tangle free cable||✓||✗|
|is dust-proof and water-resistant||✓||✗|
|has an over-the-ear foam||✓||✓|
|has an on-ear foam||✓||✗|
|has stereo speakers||✓||✓|
|SOUND QUALITY||has active noise cancellation (anc)||✓||✓|
|has passive noise reduction||✓||✓|
|sound pressure level||95dB/mW||105dB/mW|
|driver unit size||40mm||40mm|
|has a neodymium magnet||✗||✓|
|has a battery level indicator||✓||✓|
|has a rechargeable battery||✓||✓|
|CONNECTIVITY||can be used wirelessly||✓||✓|
|has usb type-c||✓||✓|
|has bluetooth aptx||✓||✗|
|maximum bluetooth range||10meters||10meters|
|has a 3.5mm male connector||✗||✓|
|supports bluetooth pairing using nfc||✗||✓|
|MICROPHONE||number of microphones||4only||5only|
|has a noise-canceling microphone||✓||✓|
|EXTRAS||has ambient sound mode||✓||✓|
|has in/on-ear detection||✓||✓|
|has a mute function||✓||✗|
|control panel placed on a device||✓||✓|
|can be used as a headset||✓||✓|
|travel bag is included||✓||✓|
|See price on Amazon||See price on Amazon|
The JBL Tour ONE M2 have a weight of 268g, these weigh below 320g, which we consider as the highest average a headphone should weigh for comfort during long use.
We consider a lower weight best because lighter devices are more comfortable to transport.
Sony WH 1000XM4, at 254g weigh less than the JBL Tour ONE M2 by -14g
Detachable cables are cables that have connectors on both ends. One end goes into your headphone cups, while the other end is inserted into an audio source. Some new headphones, and not just the expensive ones, are coming with detachable cables, JBL Tour ONE M2 are one of those.
With a detachable cable, Sony WH 1000XM4 too can use alternative cables and if the cable is pulled, it will pop out instead of breaking.
JBL Tour ONE M2 are foldable, which makes them more portable. Foldable headphones are easier to transport and take up less storage space.
The Sony WH 1000XM4 too can fold up, foldable headphones can reduce their size by 60% to 70% when folded.
Twisted headphone cables can be a great source of annoyance and inconvenience, JBL Tour ONE M2's cable is designed to minimize tangling. Constant twisting of the cables can also lead to bends in the copper wires, affecting sound quality, or rendering your headphones defective.
The JBL Tour ONE M2 is dustproof and water-resistant. A water-resistant device can resist the penetration of water, such as powerful water jets, if it is to be submerged into the water this is usually set to a given depth and for a specific time period.
By sweat resistance we mean that the wireless earbuds are protected in the presence of low-pressure water jets at any angle, this is determined by the IP Rating of the earbuds. Based on the ingress protection rating of the JBL Tour ONE M2 they do have sweat resistance
A long cable ensures more freedom of movement, but remember that every cable based on the conducting material used has a certain amount of parasitic resistance, inductance, and capacitance. How much depends on the length and construction. Sony WH 1000XM4 comes with a 1.2meters cable.
Over-ear headphones have larger earpads that fit around your entire ear JBL Tour ONE M2 have a comfortable full-size form with earcups that fully enclose your ears. This design is loved for its increased sound isolation and the fact that it won't leak sound to your neighbors.
Sony WH 1000XM4 with this design offer potential for maximum bass and loudness levels.
On-ear headphones have smaller earpads that sit on top of your ears, this JBL Tour ONE M2 comfortably rests on top of your outer ears. As it doesn't block out everything from the outside world, it's preferred in places like office environments and recommended for outdoor activities.
JBL Tour ONE M2 have stereo speakers, devices with stereo speakers deliver sound from separate channels on both left and right sides, creating a richer sound and a better listening experience.
Both Sony WH 1000XM4 and JBL Tour ONE M2 have stereo speakers
Active noise cancellation uses more advanced technology to actively counter noise. How it works, it detects and analyzes the sound pattern outside and inside the earbud and then generates a mirror signal to cancel it out. In simple terms, it's like taking +1 outside (noise from your surrounding) and adding -1 inside (counter sound within the device) to make zero resulting in a reduced level of noise.
JBL Tour ONE M2 allow you to listen at lower volume levels, causing less ear fatigue as you don't have to crank up the volume to overcome background noise.
Sony WH 1000XM4 too have active noise cancellation making both devices ideal for plane rides and morning commutes. Each may work with different noise cancellation modes, pick the setting, mode, or noise cancellation type that suits your commute or that enhances your relaxation time.
Passive Noise Cancellation uses well-designed ear cups to seal out environment noise. This is used for both in-ear earphones and over-ear headphones where the headphone itself will keep surrounding noise out.
The JBL Tour ONE M2 sits tightly in place, creating an acoustic seal that reduces background noise and prevents your music from leaking out.
Both of these devices have passive noise reduction which means that also the Sony WH 1000XM4 isolates you from ambient noise instead of actively using technology to cancel it out.
Low-frequency response measures if and how well a particular audio device reproduces low audible frequencies and if it makes any changes to the signal on the way through. JBL Tour ONE M2's lowest frequency is at 10Hz, the lower the low-frequency response, the stronger and juicier the bass.
Sony WH 1000XM4's lowest frequency is at 4Hz, this means that JBL Tour ONE M2 got a juicier bass than the Sony WH 1000XM4
High frequency response measures if and how well a particular audio device reproduces high audible frequencies and if it makes any changes to the signal on the way through. JBL Tour ONE M2's highest frequency is at 40000Hz, the higher the high-frequency response, the clearer and crispier the treble.
Sony WH 1000XM4's highest frequency is at 40000Hz, this implies that both devices produce equal treble
Sound pressure is the average variation in atmospheric pressure caused by the sound, the sound level .i.e how loud something is can be perceived differently by different people so we need to have the means to get an objective measurement of sound level expressed in numerical terms.
The sound pressure level, SPL, is the pressure level of a sound, measured in decibels, dB, JBL Tour ONE M2's measurement is 95dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source.
Sony WH 1000XM4's sound pressure level measurement is 105dB/mW.
The driver unit is the component that produces sound in the device, its size dictates the loudness of the headphone. JBL Tour ONE M2 driver unit is 40mm in diameter, bigger drivers are more powerful and can produce better bass.
Sony WH 1000XM4 driver unit is 40mm in diameter, making both devices similar in how loud their sound gets , as many tend to believe that driver units of a bigger size automatically produce better sound quality.
However, large drivers usually have difficulty reproducing high frequencies so yes, larger drivers are capable of generating louder sound, but this does not mean that they deliver better sound.
Defined as the device's resistance to the electromagnetic current, when electricity flows through a wire, it faces electrical resistance that counters the flow of current. The resistance of a wire is measured in ohms. JBL Tour ONE M2's impedance is 32Ohms, the lower the impedance, the easier it is to get higher volume and requires less power.
Sony WH 1000XM4's impedance is 16Ohms. The impedance of earbuds is the electrical resistance of the driver unit present on the inside.
Neodymium magnets if used in audio devices produce a higher sensitivity and substantial sound output while using less power. They can help produce music at quite a high sound pressure level, SPL, with the use of high magnetic flux. The Sony WH 1000XM4 have this type of magnet.
If your headphones play wirelessly, cancel ambient noise, or enhance your listening experience with active features, their battery life will reduce over time. The device's battery life is given by the manufacturer, with longer battery life, you get to use it for longer and have to charge the device less often. JBL Tour ONE M2's battery life is 50 hours
Sony WH 1000XM4's battery life is 30 hours. Each time you recharge your headphones, they get a little less listening time. The effect is barely noticeable at first. But over a few years, you may find that your device, no longer plays for long like it used to.
It takes 2 hours to fully charge the JBL Tour ONE M2's battery. It is recommended to fully charge the battery before using the headphones for the first time or when they have been unused for extended periods.
Sony WH 1000XM4 takes 3 hours to fully charge the battery
JBL Tour ONE M2 have a battery level indicator, an indicator shows you when the device has a low battery. The battery indicator lights show the charging status of your headphones.
Sony WH 1000XM4 too have a battery level indicator, charging indicators allow you to determine the charging state of your headphones, whether fully charged, or the battery is running low.
Battery power, or battery capacity, represents the amount of electrical energy that a battery can store. Sony WH 1000XM4's battery power is 1100mAh, more battery power can be an indication of longer battery life.
A rechargeable battery is a type of electrical battery that can be charged, discharged into a load, and recharged many times, as opposed to a disposable or primary battery, which is supplied fully charged and discarded after use.
JBL Tour ONE M2's battery can be recharged and used over again.
The Sony WH 1000XM4 too have a rechargeable battery.
JBL Tour ONE M2 can be used wirelessly, wireless devices allow users more freedom of movement.
The Sony WH 1000XM4 also can be used wirelessly
Bluetooth is a wireless technology standard that allows data transfers between devices placed in close proximity, using short-wavelength, ultra-high frequency radio waves. JBL Tour ONE M2 has a v5.3
Sony WH 1000XM4 has a Bluetooth version of v5. Newer versions provide faster data transfers.
JBL Tour ONE M2 support USB TYPE-C, an industry-standard connector for transmitting both data and power on a single cable. The USB-C plug is now part and parcel of most current laptops, phones, and tablets, it features reversible plug orientation and cable direction.
Sony WH 1000XM4 too have USB TYPE-C
JBL Tour ONE M2 support LDAC, a codec developed by Sony
which allows streaming high-resolution audio over Bluetooth connections at up to 990 kbps at 32 bit/96 kHz.
It is capable of a very high bitrate of 990kbps, which provides high-resolution audio.
Sony WH 1000XM4 support it as well, LDAC, can automatically adjust to a lower bitrate of 330kbps or 660kbps to increase stability.
JBL Tour ONE M2 support APTX, a codec used for transmitting audio wirelessly with Bluetooth. It is developed by Qualcomm and supports 16-bit audio at a bit rate of 384kbps.
JBL Tour ONE M2 support AAC, a codec that is used for Bluetooth audio. It supports 24-bit audio at 250kbps. Because it uses psychoacoustic modeling, it can provide better results than other codecs at a similar bit rate.
The Sony WH 1000XM4 support AAC as well. Designed to be the successor of the MP3 format, AAC generally achieves higher sound quality than MP3 encoders at the same bit rate.
Bluetooth is a short-range wireless technology standard that is used for exchanging data between fixed and mobile devices over short distances. The JBL Tour ONE M2 can connect at a 10meters distance via Bluetooth or infrared to another device.
The Sony WH 1000XM4 can connect at a 10meters distance via Bluetooth
Being an industry standard audio plug, a standard 3.5mm male connector is suitable for use with all MP3 players and computer sound cards. This means that it is commonly used in stereo headphones to your phone or connecting your phone to an external amplifier, sound bars, your car radio, etc. Sony WH 1000XM4 has this connector giving it a wider range of connectivity with most of the sound devices out there. All plugs have at least a tip and sleeve with the number of rings that stand as a differentiating factor.
Sony WH 1000XM4 support fast Bluetooth pairing using NFC so it can communicate with other devices over Bluetooth. You can fastly pair devices without entering a code by simply holding one device next to the device with which it is to be paired.
JBL Tour ONE M2 have only 4 microphones, more microphones result in better sound quality and enable the device to filter out background noise.
The Sony WH 1000XM4 microphones are only 5.
JBL Tour ONE M2 use a noise-canceling type of microphone, these microphones are designed to filter out background noise from the desired sound. Especially useful in noisy environments.
The Sony WH 1000XM4 too use a noise-canceling type of microphone.
JBL Tour ONE M2 support ambient sound mode, which uses microphones to pass through ambient noises so that they can still be heard. It’s useful when you want to listen to music but also be aware of what’s happening around you, for example when you’re having a jog but would still want to be able to hear traffic.
The Sony WH 1000XM4 support ambient sound mode as well allowing you to hear the ambient sound even while wearing them.
JBL Tour ONE M2 support in/on-ear detection, the sensors in the device can detect when they are removed from your ears so that the music is paused, saving battery life and improving your listening experience while at it.
The Sony WH 1000XM4 support in/on-ear detection, pause your music, or audiobook when you remove earbuds from your ears
JBL Tour ONE M2 have a mute function, they have an option to mute/unmute a conversation directly from the device. The mute function means that you unilaterally turn off the microphone, but you can still hear the other party's voice.
Sony WH 1000XM4 support multipoint, which allows you to link to more Bluetooth devices and switch between them. For example, you can easily switch calls from one device to another without having to manually disconnect and reconnect.
There is a control panel on the JBL Tour ONE M2 body, so you can easily access the volume control or remote without having to interact with a cable or another device it's connected to.
The Sony WH 1000XM4 too have a control panel on them.
JBL Tour ONE M2 can be used as a headset.
A headset is one headphone or pair with a built-in microphone. Headsets can be used for apps that require communication i.e. Zoom, Google Meet, Skype, games with voice chat, mobile phones, etc.
Sony WH 1000XM4 can be used as a headset. since they have a built-in microphone
The period of time that warrant free repair and adjustment services in case of a malfunction occurring under normal use that has followed instruction manuals. When covered under the manufacturer’s warranty it is possible to get a replacement in the case of a malfunction. Sony WH 1000XM4 have a warranty period of 1 years
Carrying headphones without a case, or putting them in bags without a casing can easily put them at risk of getting damaged. The JBL Tour ONE M2 come with their own special case or pouch, which is useful for safe transportation.
Sony WH 1000XM4 too have a travel bag or case included.