Sony WH 1000XM3 have a weight of 255g, these weigh below 320g, which we consider as the highest average a headphone should weigh for comfort during long use. We prefer a lower weight best because lighter devices are more comfortable to transport. The JBL Tour ONE M2, at 268g
weigh more than the Sony WH 1000XM3 with a difference 13g
Detachable cables are cables that have connectors on both ends.
One end goes into your headphone cups, while the other end is inserted into an audio source. Some new headphones, and not just the expensive ones, are coming with detachable cables, Sony WH 1000XM3 are one of those. With a detachable cable, JBL Tour ONE M2 too can use alternative cables and if the cable is pulled, it will pop out instead of breaking.
Sony WH 1000XM3 are foldable, which makes them more portable. Foldable headphones are easier to transport and take up less storage space. The JBL Tour ONE M2 too can fold up, foldable headphones can reduce their size by 60% to 70% when folded.
A long cable ensures more freedom of movement, but remember that every cable based on the conducting material used has a certain amount of parasitic resistance, inductance, and capacitance. How much depends on the length and construction. Sony WH 1000XM3 comes with a 1.2meters cable.
JBL Tour ONE M2 comes with a 1.2meters cable. Almost any cable should be fine in sound quality If you're looking at lengths up to 2 - 3 meters. Over-ear headphones have larger earpads that fit around your entire ear Sony WH 1000XM3 have a comfortable full-size form with earcups that fully enclose your ears.
This design is loved for its increased sound isolation and the fact that it won't leak sound to your neighbors. JBL Tour ONE M2 with this design offer potential for maximum bass and loudness levels. Sony WH 1000XM3 have stereo speakers, devices with stereo speakers deliver sound from independent channels on both left and right sides, this creates a richer sound and a better listening experience.
The JBL Tour ONE M2 also have stereo speakers
Active noise cancellation uses more advanced technology to actively counter noise. How it works, it listens to the sound pattern outside and inside the earbud and then inverts the soundwaves to cancel it out. In simple terms, it's like taking +1 outside (noise from your surrounding) and adding -1 inside (counter sound within the device) to make zero hence "diluting" the noise.
Sony WH 1000XM3 allow you to listen at lower volume levels, causing less ear fatigue as you don't have to crank up the volume to overcome background noise. JBL Tour ONE M2 too have active noise cancellation making both devices ideal for plane rides and morning commutes. Each may work with different noise cancellation modes, pick the setting, mode, or noise cancellation type that suits your commute or that enhances your relaxation time.
Passive Noise Cancellation uses well-designed ear cups to seal out unwanted noise. This is used for both in-ear earphones and over-ear headphones where the headphone itself will keep surrounding noise out. The Sony WH 1000XM3 sits tightly in place, creating an acoustic seal that reduces background noise and prevents your music from leaking out.
Both of these devices have passive noise reduction which means that also the JBL Tour ONE M2 isolates you from ambient noise instead of actively using technology to cancel it out. Low-frequency response measures if and how well a particular audio device reproduces low audible frequencies and if it makes any changes to the signal while at it. Sony WH 1000XM3's lowest frequency is at 4Hz, the lower the low-frequency response, the stronger and juicier the bass.
JBL Tour ONE M2's lowest frequency is at 10Hz, this means that
JBL Tour ONE M2 got a juicier bass than the Sony WH 1000XM3
High frequency response measures if and how well an audio component reproduces high audible frequencies and if it makes any changes to the signal on the way through. Sony WH 1000XM3's highest frequency is at 40,000Hz, the higher the high-frequency response, the clearer and crispier the treble. JBL Tour ONE M2's highest frequency is at 40,000Hz, this implies that
both devices produce equal treble
Sound pressure is the average variation in atmospheric pressure caused by the sound, the sound level .i.e how loud something is can be perceived differently by different people so we need to have the means to get an objective measurement of sound level expressed in numerical terms.
The sound pressure level, SPL, is the pressure level of a sound, measured in decibels, dB, Sony WH 1000XM3's measurement is 104.5dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source. JBL Tour ONE M2's sound pressure level measurement is 95dB/mW.
The driver unit is basically a mini speaker that produces sound in the device, its size dictates the loudness of the headphone. Sony WH 1000XM3 driver unit is 40mm in diameter, bigger drivers are more powerful and can produce better bass. JBL Tour ONE M2 driver unit is 40mm in diameter,
making both devices similar in how loud their sound gets
, as many tend to believe that driver units of a bigger size automatically produce better sound quality.
However, large drivers usually have difficulty reproducing high frequencies so yeah, larger drivers are capable of generating louder sound, but this does not mean that they deliver better sound. Defined as the device's resistance to the electromagnetic current, when electricity flows through a wire, it faces electrical resistance that counters the flow of current. The resistance of a wire is measured in ohms.
Sony WH 1000XM3's impedance is 16Ohms, the lower the impedance, the easier it is to get higher volume and requires less power. JBL Tour ONE M2's impedance is 32Ohms. The impedance of earbuds is the electrical resistance of the driver unit present on the inside.
Neodymium magnets when used in audio devices produce a higher sensitivity and substantial sound output while using less power. They can help produce music at quite a high sound pressure level, SPL, with the use of high magnetic flux. The Sony WH 1000XM3 have this type of magnet.
If your headphones play wirelessly, cancel ambient noise, or enhance your listening experience with active features, their battery life will reduce over time. The device's battery life is given by the manufacturer, with longer battery life, you get to use it for longer and have to charge the device less often. Sony WH 1000XM3's battery life is 30 hours
JBL Tour ONE M2's battery life is 50 hours.
Each time you recharge your headphones, they get a little less listening time. The effect is barely noticeable at first. But over a few years, you may find that your device, no longer plays for long like it used to.
It takes 3 hours to fully charge the Sony WH 1000XM3's battery. It is recommended to fully charge the battery before using the headphones for the first time or when they have been unused for extended periods. JBL Tour ONE M2 takes 2 hours to fully charge the battery
Sony WH 1000XM3 have a battery level indicator, an indicator shows you when the device has a low battery.
The battery indicator lights indicate the charging status of your headphones. JBL Tour ONE M2 too have a battery level indicator, charging indicators allow you to determine the charging state of your headphones, whether fully charged, or the battery is running low. Battery power, or battery capacity, represents the amount of electrical energy that a battery can store.
Sony WH 1000XM3's battery power is 1,000mAh, more battery power can be an indication of longer battery life. JBL Tour ONE M2's battery power is 750mAh. A rechargeable battery is a type of electrical battery that can be charged, discharged into a load, and recharged many times, as opposed to a disposable or primary battery, which is supplied fully charged and discarded after use.
Sony WH 1000XM3's battery can be recharged and used over again. The JBL Tour ONE M2 too have a rechargeable battery. Sony WH 1000XM3 can be used wirelessly, wireless devices allow you more freedom of movement.
The JBL Tour ONE M2 also can be used wirelessly
Bluetooth is a wireless technology standard that allows data transfers between devices placed in close proximity, using short-wavelength, ultra-high frequency radio waves. Sony WH 1000XM3 has a v4.2
JBL Tour ONE M2 has a Bluetooth version of v5.3. Newer versions provide faster data transfers.
Sony WH 1000XM3 support USB TYPE-C, an industry-standard connector for transmitting both data and power on a single cable. The USB-C plug is now part and parcel of most current laptops, phones, and tablets, it features reversible plug orientation and cable direction. JBL Tour ONE M2 too have USB TYPE-C
Sony WH 1000XM3 support LDAC, a codec developed by Sony
which allows streaming high-resolution audio over Bluetooth connections at up to 990 kbps at 32 bit/96 kHz.
It is capable of a very high bitrate of 990kbps, which provides high-resolution audio. JBL Tour ONE M2 support it as well, LDAC, can automatically adjust to a lower bitrate of 330kbps or 660kbps to increase stability. The Sony WH 1000XM3 support APTX HD, an audio codec for Bluetooth devices that are developed by Qualcomm.
It supports high-quality 24-bit audio (at a bit rate of 576kbps).
Sony WH 1000XM3 support APTX, a codec used for transmitting audio wirelessly with Bluetooth. It is developed by Qualcomm and supports 16-bit audio at a bit rate of 384kbps. JBL Tour ONE M2 support APTX
Sony WH 1000XM3 support AAC, a codec that is used for Bluetooth audio.
It supports 24-bit audio at 250kbps. Because it uses psychoacoustic modeling, it can provide better results than other codecs at a similar bit rate. The JBL Tour ONE M2 support AAC as well.
Designed to be the successor of the MP3 format, AAC generally achieves higher sound quality than MP3 encoders at the same bit rate. Bluetooth is a short-range wireless technology standard that is used for exchanging data between fixed and mobile devices over short distances. The Sony WH 1000XM3 can connect at a 10meters distance via Bluetooth or infrared to another device.
The JBL Tour ONE M2 can connect at a 10meters distance via Bluetooth
Being an industry standard audio plug, a standard 3.5mm male connector is suitable for use with all MP3 players and computer sound cards. This means that it is commonly used in stereo headphones to your phone or connecting your phone to an external amplifier, sound bars, your car radio, etc. Sony WH 1000XM3 has this connector giving it a wider range of connectivity with most of the sound devices out there.
All plugs have at least a tip and sleeve with the number of rings that stand as a differentiating factor. JBL Tour ONE M2 too have this kind of connector
Sony WH 1000XM3 support fast Bluetooth pairing using NFC so it can communicate with other devices over Bluetooth. You can fastly pair devices without entering a code by simply holding one device next to the device with which it is to be paired.
Sony WH 1000XM3 have only 5 microphones, more microphones result in better sound quality and enable the device to filter out background noise. The JBL Tour ONE M2 microphones are only 6. Sony WH 1000XM3 use a noise-canceling type of microphone, these microphones are designed to filter out background noise from the desired sound.
Especially useful in noisy environments. The JBL Tour ONE M2 too use a noise-canceling type of microphone. Sony WH 1000XM3 support ambient sound mode, which uses microphones to pass through ambient noises so that they can still be heard.
It’s useful when you want to listen to music but also be aware of what’s happening around you, for example when you’re having a jog but would still want to be able to hear traffic. The JBL Tour ONE M2 support ambient sound mode as well allowing you to hear the ambient sound even while wearing them. Sony WH 1000XM3 support in/on-ear detection, the sensors in the device can detect when they are removed from your ears so that the music is paused, saving battery life and improving your listening experience while at it.
The JBL Tour ONE M2 support in/on-ear detection, pause your music, or audiobook when you remove earbuds from your ears
There is a control panel on the Sony WH 1000XM3 body, so you can easily access the volume control or remote without having to interact with a cable or another device it's connected to. The JBL Tour ONE M2 too have a control panel on them. Sony WH 1000XM3 can be used as a headset.
A headset is one headphone or pair with a built-in microphone. Headsets can be used for apps that require communication i.e. Zoom, Google Meet, Skype, games with voice chat, mobile phones, etc.
JBL Tour ONE M2 can be used as a headset. since they have a built-in microphone
The period of time that warrant free repair and adjustment services in case of a malfunction occurring under normal use that has followed instruction manuals. When covered under the manufacturer’s warranty it is possible to get a replacement in the case of a malfunction.
Sony WH 1000XM3 have a warranty period of 1 years
Carrying headphones without a case, or putting them in bags without a casing can easily put them at risk of getting damaged. The Sony WH 1000XM3 come with their own special case or pouch, which is useful for safe transportation. JBL Tour ONE M2 too have a travel bag or case included.
