IP ratings refer to the rank of protection given by an enclosure, against dust and liquids. In the format of IPXX, 'X' represents a number The first value represents protection against solids such as dust, followed by the one that refers to protection against liquids (sweat).

Having a value of IP54, the JBL Wave Beam's rating is read as, the first value of 5 denotes that ingress of dust is not totally prevented but dust does not enter in harmful quantities to interfere with the correct operation or impair safety, and of liquids that they can withstand low pressure spray similar to that of a shower head when tilted at 180° for 10 minutes. The JBL Wave Beam have a weight of 8.8g . We prefer a lower weight best for the reason that lighter devices are more comfortable to carry.

True wireless devices have no wires connecting any part of the device together, JBL Wave Beam are true wireless for this case since they don't have wires. This is a major difference since wireless earbuds have wires linking the pair of earbuds . JBL Wave Beam have sweat resistance JBL Wave Beam have stereo speakers, what this means is that JBL Wave Beam's speakers deliver sound from independent channels on both left and right sides, this creates a richer sound and a better listening experience. ANC makes use of more advanced technology to actively counter noise.

ANC works when, it listens to the sound pattern of incoming noise and then inverts the soundwaves to counter it. In simple terms, it's like taking +1 (sound from your surrounding) and adding -1 (inverted noise) to make 0 hence "diluting" the noise.

JBL Wave Beam have Active Noise Cancellation enabling you to listen at lower volume levels, causing less ear fatigue as you don't have to crank up the device volume to overcome background noise.

The JBL Wave Beam sit well in place, creating an acoustic covering that reduces background sounds and also prevents the device sound from leaking out . The JBL Wave Beam driver unit is 8mm in diameter, bigger drivers are more powerful, and can produce better bass. A driver unit is basically a mini speaker that makes sound in the device, the unit size dictates the loudness of the device. JBL Wave Beam's lowest frequency is at 20Hz, low-frequency response inidcates how well an audio component generates low frequencies that can be heard, and if it makes any changes to the signal on its way through.

The JBL Wave Beam's highest frequency is at 20,000Hz, high-frequency response measures if and how well an audio device makes high audible frequencies and if it changes to the signal on its way through. The sound pressure level, is the pressure level of sound, measured in decibels, dB, JBL Wave Beam's measurement is 100dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source.

The JBL Wave Beam's battery life is 8 hours, these last longer than 5 hours of listening which is considered average before recharge. A device's battery life is usually given by the manufacturer, and with longer battery life, you get to use it for longer and have to charge the device less often. This is given by the manufacturer, and JBL Wave Beam's case has a charge of 24 hours.

A charging case with more battery hours enables you to recharge your earbuds on the go many times before recharging the case itself. It takes 2 hours to fully charge the JBL Wave Beam's battery. It is highly adivsable to fully charge the battery before using the earbuds when they have been unused for extended periods.

The JBL Wave Beam have a battery level indicator, an indicator alerts you when the device has a low battery. Its lights show the charging state of your device and case. JBL Wave Beam use USB TYPE-C, a standard connector for transmitting both data and power in a single cable.

The JBL Wave Beam have Bluetooth version of 5.2, Bluetooth is a wireless technology standard that enables data transfers between devices placed in range, using short-wavelength, ultra-high frequency radio waves. The JBL Wave Beam have a 10meters distance to connect via Bluetooth. JBL Wave Beam have 2 microphones.

The JBL Wave Beam use a noise-canceling type of microphone, these microphones are designed to reduce background sounds from the earbuds' sound. JBL Wave Beam support ambient sound mode, which uses microphones to pass through ambient noises so that they can still be heard even while wearing them When misplaced in a room, or can't easily find them in your bag, JBL Wave Beam have a find earbuds feature. The JBL Wave Beam support fast charging.

Most often, technologies like MediaTek’s Pump Express, are used to lower the amount of time it takes to fully charge the earbuds. The JBL Wave Beam have a mute function, they support the feature to mute/unmute a conversation directly from the device. The JBL Wave Beam, so you can easily access the volume control, pause, play, mute, etc whichever features are supported on the device.

The JBL Wave Beam support voice prompts. With voice prompts, you receive information through audio messages, like if there is a problem with the connection. JBL Wave Beam come with their own special pouch.

Carrying earphones openly, or putting them in your bag without a cover can easily put them at risk of getting damaged.