Jbl Wave Beam Review

Ingress protection ratings is the level of protection offered by an enclosure, against dust and liquids. In the format of IPXX, 'X' represents a number The first value represents protection against solids say dust, followed by the one that refers to protection against liquids (sweat).

Having a value of IP54, the JBL Wave Beam's rating for solids indicates that ingress of dust is not totally prevented but dust does not enter in harmful quantities to interfere with the correct operation or impair safety, and the second value of 4 means that they can withstand low pressure spray similar to that of a shower head when tilted at 180° for 10 minutes. The JBL Wave Beam have a weight of 8.8g . We take in account a lower weight better for the reason that lighter devices are easier to transport.

True wireless devices have no wires linking any part of the device together, JBL Wave Beam are true wireless for this case since they don't have cables. This is a major difference since wireless earbuds have wires connecting the two earbuds together. JBL Wave Beam are resistant to sweat JBL Wave Beam have stereo speakers, devices with stereo speakers deliver sound from independent channels on both left and right sides, creating a richer sound and a better listening experience.

Active noise cancellation uses more advanced technology to actively cancel noise. ANC works when, it detects and analyzes the sound pattern of incoming noise and after inverts the soundwaves to cancel it out. In simple terms, it's like having +1 (sound from your surrounding) then adding -1 (counter sound by the device) giving 0 which results in a reduced level of noise.

JBL Wave Beam have ANC enabling you to listen at lower levels of volume, good for your ears since you don't need to crank up the earbuds volume to overcome background sounds. JBL Wave Beam stay well in place, this creates a sound covering that reduces background sounds and also prevents the earbuds sound from leaking out at the same. The JBL Wave Beam have a unit size of 8mm in diameter, the bigger the unit the more powerful, therefor producing better bass.

The driver unit is the component that makes sound in the earbuds, its size determines the loudness of the device. The JBL Wave Beam's lowest frequency is at 20Hz, low-frequency response inidcates how well an audio component generates low recognizable frequencies and if it alters the signal while at it. JBL Wave Beam's highest frequency is at 20,000Hz, high-frequency response indicates how well a particular audio component makes high human frequencies and if it makes any adjustments to the signal on its way through.

SPL, is the pressure level of sound, in decibels, dB, JBL Wave Beam's measurement is 100dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source. JBL Wave Beam's battery life is 8 hours, these last longer than 5 hours of listening which is considered average before recharge.

A device's battery life is commonly given by the manufacturer, and with more battery hours, you get to use it for longer and requires fewer chargings. This is given by the vendor, and the JBL Wave Beam's case has a charge of 24 hours. A charging case with more battery hours enables you to recharge your earbuds on the go multiple times before recharging the case itself.

It requires 2 hours to fully charge the JBL Wave Beam's battery. It is highly adivsable to fully charge the battery before using the earbuds for the first time. JBL Wave Beam have a battery level indicator, an indicator alerts you when the device has a low battery.

The battery indicator lights show the charging status of your earbuds and charging case. The JBL Wave Beam support USB TYPE-C, an industry-standard connector for transmitting both data and power in a single cable. JBL Wave Beam have Bluetooth version of 5.2, Bluetooth is a wireless technology standard that enables data transfers between devices placed in range, using short-wavelength, ultra-high frequency radio waves.

The JBL Wave Beam have a 10meters distance to connect via Bluetooth. The JBL Wave Beam have 2 microphones. The JBL Wave Beam use a noise-canceling microphone, these microphones are designed to reduce background sounds from the earbuds' sound.

JBL Wave Beam support ambient sound mode, which uses microphones to channel ambient sound so that they can still be heard even while wearing them When lost in a room, or can't easily find them in your bag, JBL Wave Beam support the find earbuds feature. JBL Wave Beam support fast charging. Usually, technologies like Qualcomm’s Quick Charge, are used to lower the time it takes to charge a device.

JBL Wave Beam have a mute function, they support the feature to mute/unmute a conversation directly from the earbuds. The JBL Wave Beam, so you can access the volume control, pause, play, mute, etc whichever functions are supported on the device. The JBL Wave Beam support voice prompts.

Automatically receive information through audio messages, say if there is a problem with the connection. The JBL Wave Beam come with their own special pouch. Carrying earbuds without a case, or putting them inside your pockets without a cover may easily put them at risk of getting damaged.