Bang & Olufsen Beoplay PortalSee price on Amazon
Overall Score 6.6 Represents average audio ecosystem compatibility score.
JLab Audio PlaySee price on Amazon
Overall Score 4.9 Represents average audio ecosystem compatibility score.
|Bang & Olufsen Beoplay Portal
|JLab Audio Play
|has a detachable cable
|can be folded
|has a tangle free cable
|has an open-back design
|has an over-the-ear foam
|has an on-ear foam
|has stereo speakers
|has active noise cancellation (anc)
|has passive noise reduction
|sound pressure level
|driver unit size
|has a neodymium magnet
|has a battery level indicator
|has a rechargeable battery
|can be used wirelessly
|has usb type-c
|has aptx adaptive
|has aptx hd
|has bluetooth aptx
|maximum bluetooth range
|has a 3.5mm male connector
|number of microphones
|has a noise-canceling microphone
|has a mute function
|control panel placed on a device
|can be used as a headset
|travel bag is included
|has dolby atmos
|See price on Amazon
|See price on Amazon
JLab Audio Play have a weight of 150g, these weigh below 320g, which we consider as the highest average a headphone should weigh for comfort during long use.
We take in account a lower weight better because lighter devices are more comfortable to transport.
The Bang & Olufsen Beoplay Portal, at 282g are heavier than the JLab Audio Play by 132g
Detachable cables are cables that have connectors on both ends. One end goes into your headphone earpieces, while the other end is inserted into an audio source. Some new headphones, and not just the expensive ones, are coming with detachable cables, JLab Audio Play are one of those.
With a detachable cable, Bang & Olufsen Beoplay Portal too can use alternative cables and if the cable is pulled, it will pop out instead of breaking.
JLab Audio Play are foldable, which makes them more portable. Foldable headphones are easier to transport and take up less storage space.
Twisted headphone cables can be a great source of annoyance and inconvenience, JLab Audio Play's cable is designed to minimize tangling. Constant twisting of the cables can also lead to bends in the copper wires, affecting sound quality, or
rendering your headphones defective.
Bang & Olufsen Beoplay Portal too have a cable designed to help prevent tangles.
Headphones that are designed to allow air to pass through their ear cups from the rear of the speaker driver unit are known as open-back. This design provides a very natural and accurate sound, Bang & Olufsen Beoplay Portal have this kind of design which means that resonances and low-frequency that tend to build up caused by the rear enclosure are no longer a concern.
A long cable ensures more freedom of movement, but remember that every cable based on the conducting material used has a certain amount of parasitic resistance, inductance, and capacitance. How much depends on the length and construction. Bang & Olufsen Beoplay Portal comes with a 1.25meters cable.
Over-ear headphones have larger earpads that fit around your entire ear Bang & Olufsen Beoplay Portal have a comfortable full-size form with earcups that fully enclose your ears. This design is loved for its increased sound isolation and the fact that it won't leak sound to your neighbors.
On-ear headphones have smaller earpads that sit on top of your ears, this JLab Audio Play comfortably rests on top of your outer ears. As it doesn't block out everything from the outside world, it's preferred in places like office environments and recommended for outdoor activities.
Bang & Olufsen Beoplay Portal have stereo speakers, what this means is that Bang & Olufsen Beoplay Portal's speakers deliver sound from independent channels on both left and right sides, creating a richer sound and a better listening experience.
Active noise cancellation uses more advanced technology to actively counter noise. How it works, it listens to the sound pattern of incoming noise and then generates a mirror signal to cancel it out. In simple terms, it's like taking +1 outside (noise from your surrounding) and adding -1 inside (counter sound within the device) to make 0 hence "diluting" the noise.
Bang & Olufsen Beoplay Portal allow you to listen at lower volume levels, causing less ear fatigue as you don't have to crank up the volume to overcome background noise.
Passive Noise Cancellation uses well-designed ear cups to seal out environment noise. This is used for both in-ear earphones and over-ear headphones where the headphone itself will keep surrounding noise out. The Bang & Olufsen Beoplay Portal sits tightly in place, creating an acoustic seal that reduces background noise and prevents your music from leaking out.
Low-frequency response measures if and how well a particular audio device reproduces low audible frequencies and if it makes any changes to the signal while at it. JLab Audio Play's lowest frequency is at 20Hz, the lower the low-frequency response, the stronger and juicier the bass.
Bang & Olufsen Beoplay Portal's lowest frequency is at 20Hz, this implies that both devices produce equal bass
High frequency response measures if and how well an audio device reproduces high audible frequencies and if it makes any changes to the signal on the way through. JLab Audio Play's highest frequency is at 20,000Hz, the higher the high-frequency response, the clearer and crispier the treble.
Bang & Olufsen Beoplay Portal's highest frequency is at 22,000Hz, this implies that Bang & Olufsen Beoplay Portal got a clearer and crispier treble than the JLab Audio Play
Sound pressure is the average variation in atmospheric pressure caused by the sound, the sound level .i.e how loud something is can be perceived differently by different people so we need to have a way of getting an objective measurement of sound level expressed in numerical terms.
The sound pressure level, SPL, is the pressure level of a sound, measured in decibels, dB, JLab Audio Play's measurement is 110dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source.
Bang & Olufsen Beoplay Portal's sound pressure level measurement is 95dB/mW.
The driver unit is basically a mini speaker that produces sound in the device, its size dictates the loudness of the headphone. JLab Audio Play driver unit is 40mm in diameter, bigger drivers are more powerful and can produce better bass.
Bang & Olufsen Beoplay Portal driver unit is 40mm in diameter, making both Bang & Olufsen Beoplay Portal, and JLab Audio Play similar in how loud their sound gets , many people have a misconception that driver units of a bigger size automatically produce better sound quality.
However, large drivers usually have difficulty reproducing high frequencies so it's true that, larger drivers can generate louder sound, but this does not mean that they produce better sound.
Defined as the device's resistance to the electromagnetic current, when electricity flows through a conductor, it experiences electrical resistance that counters the flow of current. The resistance of a conductor is measured in ohms. JLab Audio Play's impedance is 32Ohms, the lower the impedance, the easier it is to get higher volume and requires less power.
Bang & Olufsen Beoplay Portal's impedance is 24Ohms. The impedance of earbuds is the electrical resistance of the driver unit present on the inside.
Neodymium magnets if used in audio devices produce a higher sensitivity and substantial sound output using less power to do so. They can help produce music at quite a high sound pressure level, SPL, with the use of high magnetic flux. The JLab Audio Play have this type of magnet.
Bang & Olufsen Beoplay Portal have it too, devices with neodymium magnets are lighter and more powerful than those which use ferrite magnets. It is also known that they have more bass and clear high notes.
If your headphones play wirelessly, cancel ambient noise, or enhance your listening experience with active features, their battery life will reduce over time. The device's battery life is given by the manufacturer, with longer battery life, you get to use it for longer and have to charge the device less often. JLab Audio Play's battery life is 22 hours
Bang & Olufsen Beoplay Portal's battery life is 24 hours. Each time you recharge your headphones, they get a little less listening time. The effect is barely noticeable at first. But over a few years, you may find that your device, no longer plays for long like it used to.
It takes 3 hours to fully charge the JLab Audio Play's battery. It is recommended to fully charge the battery before using the headphones for the first time or when they have been unused for extended periods.
Bang & Olufsen Beoplay Portal takes 3 hours to fully charge the battery
JLab Audio Play have a battery level indicator, an indicator shows you when the device has a low battery. The battery indicator lights indicate the charging status of your headphones.
Battery power, or battery capacity, represents the amount of electrical energy that a battery can store.
JLab Audio Play's battery power is 400mAh, more battery power can be an indication of longer battery life.
Bang & Olufsen Beoplay Portal's battery power is 1,200mAh.
A rechargeable battery is a type of electrical battery that can be charged, discharged into a load, and recharged many times, as opposed to a disposable or primary battery, which is supplied fully charged and discarded after use.
JLab Audio Play's battery can be recharged and used over again.
The Bang & Olufsen Beoplay Portal too have a rechargeable battery.
Bluetooth is a wireless technology standard that allows data transfers between devices placed in close proximity, using short-wavelength, ultra-high frequency radio waves. JLab Audio Play has a v5
Bang & Olufsen Beoplay Portal has a Bluetooth version of v5.1. Newer versions provide faster data transfers.
Bang & Olufsen Beoplay Portal support USB TYPE-C, an industry-standard connector for transmitting both data and power on a single cable. The USB-C plug is now part and parcel of most current laptops, phones, and tablets, it features reversible plug orientation and cable direction.
Bang & Olufsen Beoplay Portal support APTX Adaptive, an audio codec for Bluetooth devices that are developed by Qualcomm. It has a variable bit rate (between 279kbps and 420kbps), which means it can adjust the bit rate for different scenarios, such as listening to HD audio or reducing interference from other devices.
The Bang & Olufsen Beoplay Portal support APTX HD, an audio codec for Bluetooth devices that are developed by Qualcomm. It supports high-quality 24-bit audio (at a bit rate of 576kbps).
JLab Audio Play support APTX, a codec used for transmitting audio wirelessly with Bluetooth. It is developed by Qualcomm and supports 16-bit audio at a bit rate of 384kbps.
Bang & Olufsen Beoplay Portal support APTX
Bluetooth is a short-range wireless technology standard that is used for exchanging data between fixed and mobile devices over short distances. The JLab Audio Play can connect at a 10meters distance via Bluetooth or infrared to another device.
The Bang & Olufsen Beoplay Portal can connect at a 12meters distance via Bluetooth
Being an industry standard audio plug, a standard 3.5mm male connector is suitable for use with all MP3 players and computer sound cards. This means that it is commonly used in stereo headphones to your phone or connecting your phone to an external amplifier, sound bars, your car radio, etc. Bang & Olufsen Beoplay Portal has this connector giving it a wider range of connectivity with most of the sound devices out there. All plugs have at least a tip and sleeve with the number of rings that stand as a differentiating factor.
JLab Audio Play have only 1 microphones, more microphones result in better sound quality and enable the device to filter out background noise.
The Bang & Olufsen Beoplay Portal microphones are only 4.
Bang & Olufsen Beoplay Portal use a noise-canceling type of microphone, these microphones are designed to filter out background noise from the desired sound. Especially useful in noisy environments.
JLab Audio Play have a mute function, they have an option to mute/unmute a conversation directly from the device. The mute function means that you unilaterally turn off the microphone, but you can still hear the other party's voice.
The Bang & Olufsen Beoplay Portal too have a mute function.
Bang & Olufsen Beoplay Portal support multipoint, which allows you to link to more Bluetooth devices and switch between them. For example, you can easily switch calls from one device to another without having to manually disconnect and reconnect.
There is a control panel on the JLab Audio Play body, so you can easily access the volume control or remote without having to interact with a cable or another device it's connected to.
The Bang & Olufsen Beoplay Portal too have a control panel on them.
JLab Audio Play can be used as a headset.
A headset is one headphone or pair with a built-in microphone. Headsets can be used for apps that require communication i.e. Zoom, Google Meet, Skype, games with voice chat, mobile phones, etc.
Bang & Olufsen Beoplay Portal can be used as a headset. since they have a built-in microphone
The period of time that warrant free repair and adjustment services in case of a malfunction occurring under normal use that has followed instruction manuals. When covered under the manufacturer’s warranty it is possible to get a replacement in the case of a malfunction. JLab Audio Play have a warranty period of 2 years
The Bang & Olufsen Beoplay Portal have a warranty period of 3years.
Carrying headphones without a case, or putting them in bags without a casing can easily put them at risk of getting damaged. The JLab Audio Play come with their own special case or pouch, which is useful for safe transportation.
Dolby Atmos is a surround sound technology that allows sounds to be interpreted as three-dimensional objects. Bang & Olufsen Beoplay Portal have Dolby Atmos, which allows them to have immersive, 360-degree sound.