Size Of Speakers
Sennheiser Ambeo Soundbar Plus
7 x 2 and 2 x 4inches
LG SP11RA Soundbar ✗
Displayed as the number of speakers x size(inches), Sennheiser Ambeo Soundbar Plus has 7 x 2 and 2 x 4 measured in inches. The sound quality of any given speaker generally depends upon its size which is in turn determined by its driver unit.
Number Of Channels Of Sound Output
Sennheiser Ambeo Soundbar Plus
7.1.4only
LG SP11RA Soundbar 7.1.4only
When it comes to surround sound channels, you’re going to run across numbers in such formats as X.X two-digit, or X.X.X three-digit the first number denotes the sum of main speakers, the second number defines the sum of subwoofers, and the third number if available represents the total of “height” speakers.
NOTE: "Height" speakers are usually placed on the ceiling of the room containing the soundbar, but they may as well be upward-facing speakers within the soundbar.
Sennheiser Ambeo Soundbar Plus having a sound output value of 7.1.4 implies that it has 7 main speakers, 1 subwoofer and 4 "height" speaker
Well as the LG SP11RA Soundbar having 7.1.4 indicates that it has 7 main speakers, 1 subwoofer and 4 "height" speaker
Audio Output Power
Sennheiser Ambeo Soundbar Plus
400W
LG SP11RA Soundbar 11x50W
Sennheiser Ambeo Soundbar Plus has an audio output power of 400W, this is based on the total of speakers and their power in watts. It is the power the Sennheiser Ambeo Soundbar Plus speakers can be loaded with "comfortably".
To get a better understanding of how loud any speaker can get, there are other features to factor in such as sensitivity, sound pressure, etc.
LG SP11RA Soundbar has an audio output power of 11x50W, it
has a lower audio output power than the Sennheiser Ambeo Soundbar Plus with a difference W
A higher audio output power results in louder, clearer sounds however this is not the sole factor to decide the soundbar's loudness.
Has Aac
Sennheiser Ambeo Soundbar Plus
✓
LG SP11RA Soundbar ✓
Sennheiser Ambeo Soundbar Plus supports AAC, a codec that is used for Bluetooth audio. It transfers 24-bit audio at 250kbps. Coz it uses psychoacoustic modeling, it provides better results than other codecs at a similar bit rate.
Being the highest quality codec that any Bluetooth-supporting Apple product supports, the Sennheiser Ambeo Soundbar Plus will work fine with your MacBook. If you intend on using these with Android you need to pay even closer attention to codec support for if they only have AAC they won't provide the best audio quality possible, ensure that they also support aptX HD, LDAC, or LHDC as well
The LG SP11RA Soundbar supports AAC as well. Designed to be the successor of the MP3 format, AAC generally achieves higher sound quality than MP3 encoders at the same bit rate.
Lowest Frequency
Sennheiser Ambeo Soundbar Plus
38Hz
LG SP11RA Soundbar ✗
Low-frequency response measures if and how well an audio component reproduces low audible frequencies and if it makes any changes to the signal while at it. Sennheiser Ambeo Soundbar Plus's lowest frequency is at 38Hz.
Highest Frequency
Sennheiser Ambeo Soundbar Plus
20,000Hz
LG SP11RA Soundbar ✗
High-frequency response measures if and how well a particular audio device reproduces high audible frequencies and if it changes to the signal on the way through. Sennheiser Ambeo Soundbar Plus's highest frequency is at 20,000Hz.
Jbl Bar 300 Vs. Sennheiser Ambeo Soundbar Plus Review
Samsung Hw Q800B Vs. Sennheiser Ambeo Soundbar Plus Review