Technics EAH A800See price on Amazon
Overall Score 5.1 Represents average audio ecosystem compatibility score.
The Technics EAH A800 have a weight of 298g, these weigh below 320g, which we consider as the highest average a headphone should weigh for comfort during long use. We consider a lower weight best because lighter devices are more comfortable to carry.
Detachable cables are cables that have connectors on both ends. One end goes into your headphone earpieces, while the other end is inserted into an audio source. Some new headphones, and not just the expensive ones, are coming with detachable cables, Technics EAH A800 are one of those.
Ingress protection ratings refer to the level of protection offered by an electrical enclosure, against solids and liquids. In the format of IPXX, 'X' represent a number The first number of the IP rating refers to protection against solids say dust, while the second refers to protection against liquid.
Scoring IPX4, the Technics EAH A800's rating is read as, the first number of X denotes that no data available to specify a protection rating, and the second number of 4 means that they can withstand low pressure spray similar to that of a shower head when tilted at 180° for 10 minutes.
Technics EAH A800 are foldable, which makes them more portable. Foldable headphones are easier to transport and take up less storage space.
By sweat resistance we mean that the wireless earbuds are protected in the presence of low-pressure water jets at any angle, this is determined by the IP Rating of the earbuds. Based on the ingress protection rating of the Technics EAH A800 they do have sweat resistance
Over-ear headphones have larger earpads that fit around your entire ear Technics EAH A800 have a comfortable full-size form with earcups that fully enclose your ears. This design is loved for its increased sound isolation and the fact that it won't leak sound to your neighbors.
Technics EAH A800 have stereo speakers, devices with stereo speakers deliver sound from independent channels on both left and right sides, this creates a richer sound and a better listening experience.
Active noise cancellation uses more advanced technology to reduce unwanted ambient sounds. How it works, it detects and analyzes the sound pattern of incoming noise and then inverts the soundwaves to cancel it out. In simple terms, it's like taking +1 outside (noise from your surrounding) and adding -1 inside (counter sound within the device) to make zero resulting in a reduced level of noise.
Technics EAH A800 allow you to listen at lower volume levels, causing less ear fatigue as you don't have to crank up the volume to overcome background noise.
Low-frequency response measures if and how well an audio device reproduces low audible frequencies and if it makes any changes to the signal on the way through. Technics EAH A800's lowest frequency is at 4Hz, the lower the low-frequency response, the stronger and juicier the bass.
High frequency response measures if and how well an audio component reproduces high audible frequencies and if it changes to the signal on the way through. Technics EAH A800's highest frequency is at 40,000Hz, the higher the high-frequency response, the clearer and crispier the treble.
Sound pressure is the average variation in atmospheric pressure caused by the sound, the sound level .i.e how loud something is can be perceived differently by different people so we need to have the means to get an objective measurement of sound level expressed in numerical terms.
The sound pressure level, SPL, is the pressure level of a sound, measured in decibels, dB, Technics EAH A800's measurement is 105dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source.
The driver unit is the component that produces sound in the device, its size dictates the loudness of the headphone. Technics EAH A800 driver unit is 40mm in diameter, bigger drivers are more powerful and can produce better bass.
Impedance is the device's resistance to the electromagnetic current, as electricity flows through a conductor, it faces electrical resistance that counters the flow of current. The resistance of a wire is measured in ohms. Technics EAH A800's impedance is 34Ohms, the lower the impedance, the easier it is to get higher volume and requires less power.
If your headphones play wirelessly, cancel ambient noise, or enhance your listening experience with active features, their battery life will reduce over time. The device's battery life is given by the manufacturer, with longer battery life, you get to use it for longer and have to charge the device less often. Technics EAH A800's battery life is 50 hours
It takes 3 hours to fully charge the Technics EAH A800's battery. It is recommended to fully charge the battery before using the headphones for the first time or when they have been unused for extended periods.
A rechargeable battery is a type of electrical battery that can be charged, discharged into a load, and recharged many times, as opposed to a disposable or primary battery, which is supplied fully charged and discarded after use. Technics EAH A800's battery can be recharged and used over again.
Technics EAH A800 can be used wirelessly, wireless devices allow users more freedom of movement.
Bluetooth is a wireless technology standard that allows data transfers between devices placed in close proximity, using short-wavelength, ultra-high frequency radio waves. Technics EAH A800 has a v5.2
Technics EAH A800 support LDAC, a codec developed by Sony which allows streaming high-resolution audio over Bluetooth connections at up to 990 kbps at 32 bit/96 kHz. It is capable of a very high bitrate of 990kbps, which provides high-resolution audio.
Bluetooth is a short-range wireless technology standard that is used for exchanging data between fixed and mobile devices over short distances. The Technics EAH A800 can connect at a 10meters distance via Bluetooth or infrared to another device.
Being an industry standard audio plug, a standard 3.5mm male connector is suitable for use with all MP3 players and computer sound cards. This means that it is commonly used in stereo headphones to your phone or connecting your phone to an external amplifier, sound bars, your car radio, etc. Technics EAH A800 has this connector giving it a wider range of connectivity with most of the sound devices out there. All plugs have at least a tip and sleeve with the number of rings that stand as a differentiating factor.
Technics EAH A800 have only 8 microphones, more microphones result in better sound quality and enable the device to filter out background noise.
Technics EAH A800 use a noise-canceling type of microphone, these microphones are designed to filter out background noise from the desired sound. Especially useful in noisy environments.
Technics EAH A800 have a mute function, they have an option to mute/unmute a conversation directly from the device. The mute function means that you unilaterally turn off the microphone, but you can still hear the other party's voice.
There is a control panel on the Technics EAH A800 body, so you can easily access the volume control or remote without having to interact with a cable or another device it's connected to.
Technics EAH A800 can be used as a headset. A headset is one headphone or pair with a built-in microphone. Headsets can be used for apps that require communication i.e. Zoom, Google Meet, Skype, games with voice chat, mobile phones, etc.
Carrying headphones without a case, or putting them in bags without a casing can easily put them at risk of getting damaged. The Technics EAH A800 come with their own special case or pouch, which is useful for safe transportation.