Has Passive Noise Reduction
JBL Endurance Peak 2
✓
JLab Go Air ✓
JBL Endurance Peak 2 sit tightly in place, this creates an acoustic seal that tones down background noise while preventing the earbuds music from leaking out .
Both JLab Go Air, and JBL Endurance Peak 2 have passive noise reduction which implies that they tone down ambient noise without using technology to cancel it out.
Driver Unit Size
JBL Endurance Peak 2
10mm
JLab Go Air 8mm
JBL Endurance Peak 2 driver unit is 10mm in diameter, the bigger the unit the more powerful, and can produce better bass.
A driver unit is basically a mini speaker that produces sound in the device, its size dictates the loudness of the device.
JLab Go Air driver unit is 8mm in diameter,
which means that they have a smaller driver unit than that of JBL Endurance Peak 2 by 2mm
, many people have a misconception that driver units of a bigger size automatically produce better sound quality.
However, large drivers usually have difficulty producing high frequencies so it's true that, larger drivers can generate louder sound, but this does not mean that they deliver better quality sound.
Lowest Frequency
JBL Endurance Peak 2
20Hz
JLab Go Air 20Hz
The JBL Endurance Peak 2's lowest frequency is at 20Hz, low-frequency response inidcates how well an audio component produces low audible frequencies and if it makes any changes to the signal on its way through.
JLab Go Air's lowest frequency is at 20Hz, this implies that
both devices produce equal bass
Highest Frequency
JBL Endurance Peak 2
20000Hz
JLab Go Air 20000Hz
The JBL Endurance Peak 2's highest frequency is at 20000Hz, high-frequency response tells how well a particular audio device generates high audible frequencies and if it changes to the signal on its way through.
JLab Go Air's highest frequency is at 20000Hz, this implies that
both devices generate equal treble
Sound Pressure Level
JBL Endurance Peak 2
93dB/mW
JLab Go Air 103dB/mW
The sound pressure level, is the pressure level of sound, measured in decibels, dB, JBL Endurance Peak 2's measurement is 93dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source.
JLab Go Air's sound pressure level measurement is 103dB/mW. The sound pressure level, a device is can be considered differently by different people, so we need to have the means to get a standard measurement of sound level expressed in numerical terms.
Has A Neodymium Magnet
JBL Endurance Peak 2
✗
JLab Go Air ✓
JLab Go Air have neodymium magnets, when used in audio devices produce a higher sensitivity and substantial sound output while using less power. They can help generate music at quite a high SPL, using high magnetic flux.
A Review By Comparison Of The Nothing Ear 2 Vs. Jbl Endurance Peak 2
A Review By Comparison Of The Fiio Fw5 Vs. Jbl Endurance Peak 2