Has Active Noise Cancellation (Noise Control)
Beats Fit Pro
✓
JLab Go Air ✗
ANC uses more advanced technology to actively counter noise. ANC works when, it studies the sound pattern outside and inside the earbud and then generates a mirror signal to counter it. Simply put, it's like having +1 (noise) and adding -1 (counter sound by the device) giving 0 resulting in a reduced level of noise.
The Beats Fit Pro have ANC allowing you to listen at lower levels of volume, causing less ear fatigue since you don't need to crank up the device volume to overcome background sounds.
Has Passive Noise Reduction
Beats Fit Pro
✓
JLab Go Air ✓
JLab Go Air sit well in place, creating a sound covering that reduces your environment noise and also prevents the device voice audio from leaking out at the same.
Both Beats Fit Pro, and JLab Go Air have passive noise reduction which implies that both limit ambient noise without using ANC to cancel it out.
Driver Unit Size
Beats Fit Pro
9.5mm
JLab Go Air 8mm
JLab Go Air have a unit size of 8mm in diameter, bigger drivers are more powerful, and can produce better bass.
A driver unit is the component that produces sound in the device, the unit size dictates the loudness of the earbuds.
Beats Fit Pro driver unit is 9.5mm in diameter,
making them have a larger driver unit than that of JLab Go Air by 1.5mm
, many people have a misconception that driver units of a bigger size automatically produce better sound quality.
However, large drivers find it difficult to produce high frequencies so yeah, larger drivers are capable of generating louder sound, but this does not imply that they deliver better quality sound.
Lowest Frequency
Beats Fit Pro
20Hz
JLab Go Air 20Hz
JLab Go Air's lowest frequency is at 20Hz, low-frequency response inidcates how well an audio device produces low recognizable frequencies and if it makes any changes to the signal while at it.
Beats Fit Pro's lowest frequency is at 20Hz, this means that
both devices can produce equal bass
Highest Frequency
Beats Fit Pro
20000Hz
JLab Go Air 20000Hz
The JLab Go Air's highest frequency is at 20000Hz, high-frequency response shows how well a particular audio component makes high human frequencies and if it makes any adjustments to the signal while at it.
Beats Fit Pro's highest frequency is at 20000Hz, this means that
both devices generate equal treble
Sound Pressure Level
Beats Fit Pro
101.3dB/mW
JLab Go Air 103dB/mW
SPL, is the pressure level of sound, measured in decibels, dB, JLab Go Air's measurement is 103dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source.
Beats Fit Pro's sound pressure level measurement is 101.3dB/mW. How loud a device is can be taken differently by different people, so we need to have a way of getting an objective measurement of sound level expressed in numerical terms.
Has A Neodymium Magnet
Beats Fit Pro
✓
JLab Go Air ✓
JLab Go Air have neodymium magnets, when used in earbuds produce a higher sensitivity and substantial sound output while using less power. They can help produce music at quite a high sound pressure level, using high magnetic flux.
Beats Fit Pro too have it, devices with neodymium magnets are lighter and more powerful than those which use ferrite magnets. It is also known that they have more bass and clearer high notes.
A Review By Comparison Of The Audio Technica Ath Cks50Tw Vs. Jlab Go Air
A Review By Comparison Of The Jbl Wave Beam Vs. Jlab Go Air