Jabra Elite Active 75t
See price on AmazonOverall Score 8.3 Represents average audio ecosystem compatibility score.
JLab Go Air
See price on AmazonOverall Score 5.3 Represents average audio ecosystem compatibility score.
Category | Features | Jabra Elite Active 75t | JLab Go Air |
---|---|---|---|
DESIGN | ingress protection (ip) rating | IP57 | IP44 |
weight | 10.1g | 10g | |
has no wires or cables | ✓ | ✓ | |
sweat resistance | ✓ | ✓ | |
has stereo speakers | ✓ | ✓ | |
SOUND QUALITY | has active noise cancellation (noise control) | ✓ | ✗ |
has passive noise reduction | ✓ | ✓ | |
driver unit size | 6mm | 8mm | |
lowest frequency | 20Hz | 20Hz | |
highest frequency | 20,000Hz | 20,000Hz | |
sound pressure level | ✗ | 103dB/mW | |
POWER | battery life | 7.5hours | 5hours |
battery life of charging case | 28hours | 15hours | |
charge time | 2.3hours | 1.5hours | |
has wireless charging | ✓ | ✗ | |
has a battery level indicator | ✓ | ✓ | |
CONNECTIVITY | has usb type-c | ✓ | ✗ |
bluetooth version | v5 | v5 | |
maximum bluetooth range | 10meters | 10meters | |
has aac | ✓ | ✗ | |
MICROPHONE | number of microphones | 4only | 2only |
has a noise-canceling microphone | ✓ | ✗ | |
mic sensitivity | ✗ | -38dBV/Pa | |
highest mic frequency | 10,000Hz | ✗ | |
lowest mic frequency | 100Hz | ✗ | |
EXTRAS | has ambient sound mode | ✓ | ✗ |
has in/on-ear detection | ✓ | ✗ | |
has find earbuds feature | ✓ | ✗ | |
supports fast charging | ✓ | ✗ | |
multipoint count | 2only | ✗ | |
has a mute function | ✓ | ✗ | |
control panel placed on a device | ✓ | ✓ | |
warranty period | 2Years | 2Years | |
has voice prompts | ✓ | ✓ | |
travel bag is included | ✓ | ✗ | |
See price on Amazon | See price on Amazon |
IP ratings refer to the rank of protection given by an enclosure, against dust and liquids. The letters 'IP' are followed by two values The first value of the IP rating refers to protection against solids say dust, while the second refers to protection against liquids (sweat).
Scoring IP44, the JLab Go Air's rating is read as, the first number of 4 denotes that they are protected against objects greater than 1.0mm such as wire, and the second value of 4 means that they can withstand low pressure spray similar to that of a shower head when tilted at 180° for 10 minutes.
Compared to the JLab Go Air, Jabra Elite Active 75t have a rating of IP57 meaning that
JLab Go Air has a lower dust resistance than Jabra Elite Active 75t
and that of liquids is that,
JLab Go Air has a lower liquid rating than Jabra Elite Active 75t
JLab Go Air have a weight of 10g . We prefer a lower weight best because lighter devices are easier to transport.
The Jabra Elite Active 75t, at 10.1g
weigh more than the JLab Go Air with a difference of 0.1g
For a device to be true wireless it should have no wires connecting any part of the device together, JLab Go Air are true wireless for this matter since they have no wires. This is an important difference since wireless earbuds have cables connecting the two earbuds together.
Jabra Elite Active 75t also is true wireless since it has no cables connecting the two earbuds .
JLab Go Air are resistant to sweat
Jabra Elite Active 75t's resistance to sweat makes both devices ideal for use while doing sports such as long-distance running, marathons, training in workout bodysuits, etc
JLab Go Air have stereo speakers, devices with stereo speakers deliver sound from independent channels on both left and right sides, creating a richer sound and a better listening experience.
Both Jabra Elite Active 75t and JLab Go Air have stereo speakers
Active noise cancellation uses more advanced technology to actively counter noise. How it works, it detects and analyzes the sound pattern outside and inside the earbud and then generates a mirror signal to counter it. Simply put, it's like having +1 (sound from your surrounding) then producing -1 (counter sound by the device) to make zero thus "diluting" the noise.
Jabra Elite Active 75t have Active Noise Cancellation allowing you to listen at lower volume levels, causing less ear fatigue as you don't need to crank up the earbuds volume to overcome background noise.
JLab Go Air sit well in place, this creates a sound seal that reduces your environment sounds well as preventing the device sound from leaking out .
Both Jabra Elite Active 75t, and JLab Go Air have passive noise reduction this means that they reduce ambient noise without using ANC to cancel it out.
The JLab Go Air have a unit size of 8mm in diameter, bigger drivers are more powerful, and can produce better bass.
The driver unit is the component that produces sound in the device, the unit size corellates with the sound made by the earbuds.
Jabra Elite Active 75t driver unit is 6mm in diameter,
which implies that they have a smaller driver unit than that of JLab Go Air by 2mm
, a common assumption that driver units of a bigger size automatically produce better sound quality.
However, large drivers find it difficult to produce high frequencies so it's true that, larger drivers are capable of generating louder sound, but this does not mean that they produce better quality sound.
The JLab Go Air's lowest frequency is at 20Hz, low-frequency response inidcates how well a particular audio device produces low recognizable frequencies and if it makes any changes to the signal on its way through.
Jabra Elite Active 75t's lowest frequency is at 20Hz, this implies that
both devices can make sound with equal bass
JLab Go Air's highest frequency is at 20,000Hz, high-frequency response tells how well a particular audio device generates high human frequencies and if it changes to the signal while at it.
Jabra Elite Active 75t's highest frequency is at 20,000Hz, this means that
both devices produce equal treble
The sound pressure level, is the level of pressure of sound, measured in decibels, dB, JLab Go Air's measurement is 103dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source.
The JLab Go Air's battery life is 5 hours, these last less than 5 hours of listening which is considered average for a single charge. A device's battery life is usually given by the manufacturer, and with more battery hours, you get to use it for longer and have to charge the device less often.
Jabra Elite Active 75t's battery life is
more than that of JLab Go Air by 2.5 hours
. Each time you recharge your device, they get a little less listening time. The effect is not noticeable at first, but over a few years, your wireless earbuds will no longer play for long like they used to.
This is given by the manufacturer, and the JLab Go Air's case has a full charge of 15 hours. A charging case with more battery hours allows you to recharge your earbuds on the go several times before recharging the case itself.
Jabra Elite Active 75t's charging case has a battery life of 28 hours,
more than that of JLab Go Air by 13 hours
It takes 1.5 hours to fully charge the JLab Go Air's battery. It is highly adivsable to charge fully the battery before using the earbuds for the first time.
Jabra Elite Active 75t takes 2.3 hours to fully charge the battery,
more than that of JLab Go Air by 0.8 hours
The Jabra Elite Active 75t, the device supports wireless charging. To charge the earbuds, you simply put down on a supported charging pad.
The JLab Go Air have a battery level indicator, an indicator shows you when the device has a low battery. The battery indicator lights show the charging status of your device and charging case.
Jabra Elite Active 75t too have a battery level indicator, charging indicators enable you tell the charging state of your earbuds, whether fully charged, or having a low battery.
Jabra Elite Active 75t use USB TYPE-C, a standard connector for transmitting both data and power through a single cable.
The JLab Go Air have Bluetooth version of 5, Bluetooth is a wireless technology standard that allows data movement between devices placed in close proximity, using short-wavelength, ultra-high frequency radio waves.
Jabra Elite Active 75t has a Bluetooth version of 5,
equal to that of the JLab Go Air
. Newer versions provide faster data transfers.
The JLab Go Air have a 10meters distance to connect via Bluetooth.
Jabra Elite Active 75t have a maximum range of 10meters,
equal to that of the JLab Go Air
Jabra Elite Active 75t support AAC, a codec used for Bluetooth audio. It supports 24-bit audio at 250kbps. Because it uses psychoacoustic modeling, it provides better results than other codecs at a similar bit rate.
Being the highest quality codec that any Bluetooth-supporting Apple product supports, the Jabra Elite Active 75t will work well with your iPad. If you intend on using these with Android , ensure that they also support aptX HD, LDAC, or LHDC as well.
JLab Go Air have 2 microphones.
While the Jabra Elite Active 75t microphones are 4,
more than that of JLab Go Air by 2
. More microphones result in better sound quality and enable the device to filter out noise.
Jabra Elite Active 75t use a noise-canceling microphone, these microphones are intended to filter out background sounds from the earbuds' sound.
The JLab Go Air microphone sensitivity is measured at -38dBV/Pa. The amount of the analog or digital output signal from the microphone with its input stimulus is a calculation of its sensitivity. It's the 'loudness' of the voice that the earbud microphone can recognize.
The Jabra Elite Active 75t's highest mic frequency is 10,000Hz, high frequencies are best for recording treble. The highest mic frequency of a microphone is defined as its upper limiting frequency.
The Jabra Elite Active 75t's lowest mic frequency is 100Hz, low frequencies are better for recording bass. The lowest mic frequency of a microphone is defined as its lower limiting frequency.
The Jabra Elite Active 75t support ambient sound mode, which uses microphones to pass through ambient sound to still be heard even while wearing them
The Jabra Elite Active 75t have in/on-ear detection, the sensors in the earbuds can detect when they are removed from your ears .
If misplaced in a room, or can't be found in your bag, Jabra Elite Active 75t have a find earbuds feature.
Jabra Elite Active 75t support fast charging. Most often, technologies like Qualcomm’s Quick Charge, are used to lower the amount of time it takes to charge a device.
The Jabra Elite Active 75t support multipoint of 2 connections, the multipoint feature allows you connect to more than one Bluetooth device and switch between them. Say, you can seemlessly switch calls from one device to another without manually disconnect and reconnect.
The Jabra Elite Active 75t have a mute function, they support the option to mute/unmute a conversation directly from the earbuds.
With the JLab Go Air, so you can access the volume control, pause, play, mute, etc whichever features are supported on the device.
Jabra Elite Active 75t too have a control panel on them.
The JLab Go Air have a warranty period of 2 Years, the period of time that warrant free repair and adjustment services in case of a malfunction occurring under normal use following instruction manuals.
If covered under the manufacturer’s warranty it is possible to get a replacement a malfunction occurs. Jabra Elite Active 75t have a warranty period of 2Years,
equal to that of the JLab Go Air
.
JLab Go Air support voice prompts. Automatically receive information via audio messages, like if there is an issue with the connection.
The Jabra Elite Active 75t too have voice prompts .i.e the earbuds will notify you when the battery is running low, and it's time to recharge the earbuds.
Jabra Elite Active 75t come with their own special case. Carrying earbuds without a case, or putting them inside your pockets without a cover can easily put them at risk of getting damaged.