Has Active Noise Cancellation (Noise Control)
Xiaomi FlipBuds Pro
✓
JLab Go Air ✗
ANC makes use of advanced kind of tech to actively counter noise. How it works, it detects and analyzes the sound pattern of incoming noise and after generates a mirror signal to counter it. Simply put, it's like taking +1 (noise) and adding -1 (inverted noise) giving zero thus "diluting" the noise.
The Xiaomi FlipBuds Pro have Active Noise Cancellation allowing you to listen at lower levels of volume, good for your ears as you don't need to crank up the earbuds volume to outcompete background sounds.
Has Passive Noise Reduction
Xiaomi FlipBuds Pro
✓
JLab Go Air ✓
The JLab Go Air sit tightly in place, this creates a sound covering that tones down your environment sounds and also prevents the device sound from leaking out .
Both of these devices have passive noise reduction this means that they tone down ambient noise instead of actively using ANC to cancel it out.
Driver Unit Size
Xiaomi FlipBuds Pro
11mm
JLab Go Air 8mm
The JLab Go Air have a unit size of 8mm in diameter, the bigger the unit the more powerful, therefor producing better bass.
A driver unit is basically a mini speaker that produces sound in the earbuds, its size corellates with the loudness of the device.
Xiaomi FlipBuds Pro driver unit is 11mm in diameter,
making them have a larger driver unit than that of JLab Go Air by 3mm
, as many tend to believe that driver units of a bigger size automatically produce better sound quality.
However, large drivers usually have difficulty producing high frequencies so yes, larger drivers can generate louder sound, but this does not mean that they deliver better quality sound.
Lowest Frequency
Xiaomi FlipBuds Pro
✗
JLab Go Air 20Hz
JLab Go Air's lowest frequency is at 20Hz, low-frequency response measures if and how well a particular audio device produces low recognizable frequencies and if it makes any changes to the signal on its way through.
Highest Frequency
Xiaomi FlipBuds Pro
✗
JLab Go Air 20000Hz
JLab Go Air's highest frequency is at 20000Hz, high-frequency response measures if and how well a particular audio device produces high recognizable frequencies and if it changes to the signal on its way through.
Sound Pressure Level
Xiaomi FlipBuds Pro
✗
JLab Go Air 103dB/mW
The sound pressure level, is the pressure level of sound, measured in decibels, dB, JLab Go Air's measurement is 103dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source.
Has A Neodymium Magnet
Xiaomi FlipBuds Pro
✗
JLab Go Air ✓
The JLab Go Air have neodymium magnets, when used in earbuds produce a higher sensitivity and substantial sound output while using less power. They can help produce music at quite a high SPL, using high magnetic flux.
A Review By Comparison Of The Razer Hammerhead Pro Hyperspeed Vs. Jlab Go Air
A Review By Comparison Of The Jbl Wave Beam Vs. Jlab Go Air