Home Headphones Kvidio Wh201A Vs. Shure Aonic 40

A Review By Comparison of the Kvidio Wh201A Vs. Shure Aonic 40

Last updated on Jun 6, 2023   7 minute read
Note: This page may contain affiliate links, we only earn from qualifying purchases!
KVIDIO WH201A

KVIDIO WH201A

See price on Amazon

Reasons why you might like the KVIDIO WH201A

Overall Score 4.7 Represents average audio ecosystem compatibility score.

  • Weight of 200 g
  • Battery Life of 65 hours
  • Can Be Used Wirelessly
VS
Shure Aonic 40

Shure Aonic 40

See price on Amazon

Reasons why you might like the Shure Aonic 40

Overall Score 4 Represents average audio ecosystem compatibility score.

  • Weight of 311 g
  • Has Active Noise Cancellation (Anc)
  • Battery Life of 25 hours
  • Can Be Used Wirelessly

A summary of the review by feature comparison

Category Features KVIDIO WH201A Shure Aonic 40
DESIGN weight 200g 311g
has a detachable cable
can be folded
has a tangle free cable
has an over-the-ear foam
has stereo speakers
SOUND QUALITY has active noise cancellation (anc)
has passive noise reduction
lowest frequency 20hz 20hz
highest frequency 20,000hz 20,000hz
driver unit size 40mm 40mm
impedance 32ohms
POWER battery life 65hours 25hours
charge time 2.5hours
has a battery level indicator
battery power 500mah
has a rechargeable battery
CONNECTIVITY can be used wirelessly
bluetooth version v5.3 v5
has usb type-c
has bluetooth aptx
has aac
maximum bluetooth range 10meters
has a 3.5mm male connector
MICROPHONE number of microphones 1only
EXTRAS multipoint count 2only
control panel placed on a device
can be used as a headset
warranty period 1.5years
travel bag is included
See price on Amazon See price on Amazon

A breakdown of the review per specifications

Design

Weight

KVIDIO WH201A 200g
Shure Aonic 40 311g

The KVIDIO WH201A have a weight of 200g, these weigh below 320g, which we consider as the highest average a headphone should weigh for comfort during long use. We prefer a lower weight best because lighter devices are more comfortable to carry.

Shure Aonic 40, at 311g are heavier than the KVIDIO WH201A by 111g

Has A Detachable Cable

KVIDIO WH201A
Shure Aonic 40

Detachable cables are cables that have connectors on both ends. One end goes into your headphone earpieces, while the other end is inserted into an audio source. Some new headphones, and not just the expensive ones, are coming with detachable cables, KVIDIO WH201A are one of those.

With a detachable cable, Shure Aonic 40 too can use alternative cables and if the cable is pulled, it will pop out instead of breaking.

Can Be Folded

KVIDIO WH201A
Shure Aonic 40

KVIDIO WH201A are foldable, which makes them more portable. Foldable headphones are easier to transport and take up less storage space.

The Shure Aonic 40 too can fold up, foldable headphones can reduce their size by 60% to 70% when folded.

Has A Tangle Free Cable

KVIDIO WH201A
Shure Aonic 40

Twisted headphone cables can be a great source of annoyance and inconvenience, Shure Aonic 40's cable is designed to minimize tangling. Constant twisting of the cables can also lead to bends in the copper wires, affecting sound quality, or rendering your headphones defective.

Has An Over-The-Ear Foam

KVIDIO WH201A
Shure Aonic 40

Over-ear headphones have larger earpads that fit around your entire ear KVIDIO WH201A have a comfortable full-size form with earcups that fully enclose your ears. This design is loved for its increased sound isolation and the fact that it won't leak sound to your neighbors.

Shure Aonic 40 with this design offer potential for maximum bass and loudness levels.

Has Stereo Speakers

KVIDIO WH201A
Shure Aonic 40

KVIDIO WH201A have stereo speakers, what this means is that KVIDIO WH201A's speakers deliver sound from independent channels on both left and right sides, this creates a richer sound and a better listening experience.

Both Shure Aonic 40 and KVIDIO WH201A have stereo speakers

KVIDIO WH201A
See price on Amazon

Sound Quality

Has Active Noise Cancellation (Anc)

KVIDIO WH201A
Shure Aonic 40

Active noise cancellation uses more advanced technology to actively counter noise. How it works, it listens to the sound pattern of incoming noise and then inverts the soundwaves to cancel it out. In simple terms, it's like taking +1 outside (noise from your surrounding) and adding -1 inside (counter sound within the device) to make 0 hence "diluting" the noise.

Shure Aonic 40 allow you to listen at lower volume levels, causing less ear fatigue as you don't have to crank up the volume to overcome background noise.

Has Passive Noise Reduction

KVIDIO WH201A
Shure Aonic 40

Passive Noise Cancellation uses well-designed ear cups to seal out environment noise. This is used for both in-ear earphones and over-ear headphones where the headphone itself will keep surrounding noise out. The KVIDIO WH201A sits tightly in place, creating an acoustic seal that reduces background noise and prevents your music from leaking out.

Both of these devices have passive noise reduction which means that also the Shure Aonic 40 isolates you from ambient noise instead of actively using technology to cancel it out.

Lowest Frequency

KVIDIO WH201A 20hz
Shure Aonic 40 20hz

Low-frequency response measures if and how well an audio device reproduces low audible frequencies and if it makes any changes to the signal on the way through. KVIDIO WH201A's lowest frequency is at 20Hz, the lower the low-frequency response, the stronger and juicier the bass.

Shure Aonic 40's lowest frequency is at 20Hz, this implies that both devices produce equal bass

Highest Frequency

KVIDIO WH201A 20,000hz
Shure Aonic 40 20,000hz

High frequency response measures if and how well a particular audio device reproduces high audible frequencies and if it makes any changes to the signal while at it. KVIDIO WH201A's highest frequency is at 20,000Hz, the higher the high-frequency response, the clearer and crispier the treble.

Shure Aonic 40's highest frequency is at 20,000Hz, this implies that both devices produce equal treble

Driver Unit Size

KVIDIO WH201A 40mm
Shure Aonic 40 40mm

The driver unit is the component that produces sound in the device, its size dictates the loudness of the headphone. KVIDIO WH201A driver unit is 40mm in diameter, bigger drivers are more powerful and can produce better bass.

Shure Aonic 40 driver unit is 40mm in diameter, making both Shure Aonic 40, and KVIDIO WH201A similar in how loud their sound gets , as many tend to believe that driver units of a bigger size automatically produce better sound quality.

However, large drivers usually have difficulty reproducing high frequencies so yeah, larger drivers can generate louder sound, but this does not mean that they deliver better sound.

Impedance

KVIDIO WH201A 32ohms
Shure Aonic 40

Impedance is the device's resistance to the electromagnetic current, when electricity flows through a wire, it faces electrical resistance that counters the flow of current. The resistance of a wire is measured in ohms. KVIDIO WH201A's impedance is 32Ohms, the lower the impedance, the easier it is to get higher volume and requires less power.

Power

Battery Life

KVIDIO WH201A 65hours
Shure Aonic 40 25hours

If your headphones play wirelessly, cancel ambient noise, or enhance your listening experience with active features, their battery life will reduce over time. The device's battery life is given by the manufacturer, with longer battery life, you get to use it for longer and have to charge the device less often. KVIDIO WH201A's battery life is 65 hours

Shure Aonic 40's battery life is 25 hours. Each time you recharge your headphones, they get a little less listening time. The effect is barely noticeable at first. But over a few years, you may find that your device, no longer plays for long like it used to.

Charge Time

KVIDIO WH201A 2.5hours
Shure Aonic 40

It takes 2.5 hours to fully charge the KVIDIO WH201A's battery. It is recommended to fully charge the battery before using the headphones for the first time or when they have been unused for extended periods.

Has A Battery Level Indicator

KVIDIO WH201A
Shure Aonic 40

KVIDIO WH201A have a battery level indicator, an indicator shows you when the device has a low battery. The battery indicator lights show the charging status of your headphones.

Battery Power

KVIDIO WH201A 500mah
Shure Aonic 40

Battery power, or battery capacity, represents the amount of electrical energy that a battery can store. KVIDIO WH201A's battery power is 500mAh, more battery power can be an indication of longer battery life.

Has A Rechargeable Battery

KVIDIO WH201A
Shure Aonic 40

A rechargeable battery is a type of electrical battery that can be charged, discharged into a load, and recharged many times, as opposed to a disposable or primary battery, which is supplied fully charged and discarded after use. KVIDIO WH201A's battery can be recharged and used over again.

The Shure Aonic 40 too have a rechargeable battery.

KVIDIO WH201A
See price on Amazon

Connectivity

Can Be Used Wirelessly

KVIDIO WH201A
Shure Aonic 40

KVIDIO WH201A can be used wirelessly, wireless devices allow users more freedom of movement.

The Shure Aonic 40 also can be used wirelessly

Bluetooth Version

KVIDIO WH201A v5.3
Shure Aonic 40 v5

Bluetooth is a wireless technology standard that allows data transfers between devices placed in close proximity, using short-wavelength, ultra-high frequency radio waves. KVIDIO WH201A has a v5.3

Shure Aonic 40 has a Bluetooth version of v5. Newer versions provide faster data transfers.

Has Usb Type-C

KVIDIO WH201A
Shure Aonic 40

KVIDIO WH201A support USB TYPE-C, an industry-standard connector for transmitting both data and power on a single cable. The USB-C plug is now part and parcel of most current laptops, phones, and tablets, it features reversible plug orientation and cable direction.

Has Bluetooth Aptx

KVIDIO WH201A
Shure Aonic 40

Shure Aonic 40 support APTX, a codec used for transmitting audio wirelessly with Bluetooth. It is developed by Qualcomm and supports 16-bit audio at a bit rate of 384kbps.

Has Aac

KVIDIO WH201A
Shure Aonic 40

Shure Aonic 40 support AAC, a codec that is used for Bluetooth audio. It supports 24-bit audio at 250kbps. Because it uses psychoacoustic modeling, it can provide better results than other codecs at a similar bit rate.

Maximum Bluetooth Range

KVIDIO WH201A 10meters
Shure Aonic 40

Bluetooth is a short-range wireless technology standard that is used for exchanging data between fixed and mobile devices over short distances. The KVIDIO WH201A can connect at a 10meters distance via Bluetooth or infrared to another device.

Has A 3.5Mm Male Connector

KVIDIO WH201A
Shure Aonic 40

Being an industry standard audio plug, a standard 3.5mm male connector is suitable for use with all MP3 players and computer sound cards. This means that it is commonly used in stereo headphones to your phone or connecting your phone to an external amplifier, sound bars, your car radio, etc. KVIDIO WH201A has this connector giving it a wider range of connectivity with most of the sound devices out there. All plugs have at least a tip and sleeve with the number of rings that stand as a differentiating factor.

Shure Aonic 40 too have this kind of connector

Microphone

Number Of Microphones

KVIDIO WH201A 1only
Shure Aonic 40

KVIDIO WH201A have only 1 microphones, more microphones result in better sound quality and enable the device to filter out background noise.

KVIDIO WH201A
See price on Amazon

Extras

Multipoint Count

KVIDIO WH201A 2only
Shure Aonic 40

KVIDIO WH201A support multipoint, which allows you to link to more Bluetooth devices and switch between them. For example, you can easily switch calls from one device to another without having to manually disconnect and reconnect.

Control Panel Placed On A Device

KVIDIO WH201A
Shure Aonic 40

There is a control panel on the KVIDIO WH201A body, so you can easily access the volume control or remote without having to interact with a cable or another device it's connected to.

The Shure Aonic 40 too have a control panel on them.

Can Be Used As A Headset

KVIDIO WH201A
Shure Aonic 40

KVIDIO WH201A can be used as a headset. A headset is one headphone or pair with a built-in microphone. Headsets can be used for apps that require communication i.e. Zoom, Google Meet, Skype, games with voice chat, mobile phones, etc.

Shure Aonic 40 can be used as a headset. since they have a built-in microphone

Warranty Period

KVIDIO WH201A 1.5years
Shure Aonic 40

The period of time that warrant free repair and adjustment services in case of a malfunction occurring under normal use that has followed instruction manuals. When covered under the manufacturer’s warranty it is possible to get a replacement in the case of a malfunction. KVIDIO WH201A have a warranty period of 1.5 years

Travel Bag Is Included

KVIDIO WH201A
Shure Aonic 40

Carrying headphones without a case, or putting them in bags without a casing can easily put them at risk of getting damaged. The Shure Aonic 40 come with their own special case or pouch, which is useful for safe transportation.

Related Reviews