JLab Go Air
See price on AmazonOverall Score 5.3 Represents average audio ecosystem compatibility score.
Ingress protection ratings refer to the rating of protection offered by an enclosure, against solids and water. In the format of IPXX, 'X' represents a number The first value means protection against solids such as dust, followed by the one that refers to protection against liquids (water).
Scoring IP44, the JLab Go Air's rating is read as, the first value of 4 denotes that they are protected against objects greater than 1.0mm such as wire, and the second value of 4 means that they can withstand low pressure spray similar to that of a shower head when tilted at 180° for 10 minutes.
The JLab Go Air have a weight of 10g . We take in account a lower weight best for the reason that lighter devices are easier to carry.
True wireless devices have no wires linking any part of the device together, JLab Go Air are true wireless for this case since they don't have wires. This is a key distinction as some wireless earbuds have wires connecting the pair of earbuds together.
JLab Go Air have sweat resistance
JLab Go Air have stereo speakers, what this means is that JLab Go Air's speakers deliver sound from independent channels on both left and right sides, creating a richer sound and a better listening experience.
JLab Go Air sit well in place, creating a sound seal that reduces background noise while preventing the device voice audio from leaking out at the same.
JLab Go Air driver unit is 8mm in diameter, the bigger the unit the more powerful, and can produce better bass. The driver unit is the component that produces sound in the device, the unit size dictates the loudness of the device.
The JLab Go Air's lowest frequency is at 20Hz, low-frequency response inidcates how well a particular audio component produces low frequencies that can be heard, and if it alters the signal while at it.
JLab Go Air's highest frequency is at 20,000Hz, high-frequency response indicates how well a particular audio device makes high audible frequencies and if it makes any changes to the signal on its way through.
The sound pressure level, is the pressure level of sound, in decibels, dB, JLab Go Air's measurement is 103dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source.
JLab Go Air's battery life is 5 hours, these last less than 5 hours of listening which is considered average for a single charge. A device's battery life is usually given by the manufacturer, and with longer battery life, you get to use it for longer and have to charge the device less often.
This is given by the manufacturer, and JLab Go Air's case is said to have a full charge of 15 hours. A charging case with a longer battery life allows you to recharge your earbuds on the go multiple times before having to recharge the case itself.
It takes 1.5 hours to fully charge the JLab Go Air's battery. It is highly adivsable to charge fully the battery before using the earbuds when they have been unused for extended periods.
The JLab Go Air have a battery level indicator, an indicator notifies you when the earbuds has a low battery. The battery indicator lights display the charging state of your earbuds and charging case.
The JLab Go Air have Bluetooth version of 5, Bluetooth is a wireless technology standard that enables data movement between devices placed in range, using short-wavelength, ultra-high frequency radio waves.
The JLab Go Air have a 10meters distance to connect via Bluetooth.
JLab Go Air have 2 microphones.
JLab Go Air microphone sensitivity is measured at -38dBV/Pa. The vastness of the analog or digital output signal from the microphone with its input stimulus is a calculation of its sensitivity. It's the 'loudness' of the voice that the microphone can recognize.
With the JLab Go Air, so you can access the volume control, pause, play, mute, etc whichever features are supported on the device.
The JLab Go Air have a warranty period of 2 Years, the period of time that warrant free repair and adjustment services in case of a malfunction occurring under normal use that has followed instruction manuals.
The JLab Go Air support voice prompts. Automatically receive information through audio messages, say if there is a problem with the connection.