JLab Go Air
See price on AmazonOverall Score 5.3 Represents average audio ecosystem compatibility score.
Ingress protection ratings is the level of protection offered by a casing, against dust and liquids. The letters 'IP' are followed by two values The first value refers to protection against solids such as dust, while the second refers to protection against liquids (water).
Having a value of IP44, the JLab Go Air's rating is read as, the first value of 4 denotes that they are protected against objects greater than 1.0mm such as wire, and of liquids that they can withstand low pressure spray similar to that of a shower head when tilted at 180° for 10 minutes.
The JLab Go Air have a weight of 10g . We take in account a lower weight best because lighter devices are more comfortable to move with.
True wireless devices have no wires linking any part of the device together, JLab Go Air are true wireless for this case since they don't have cables. This is a major distinction as some wireless earbuds have cables connecting the two earbuds together.
JLab Go Air are resistant to sweat
JLab Go Air have stereo speakers, what this means is that JLab Go Air's speakers deliver sound from separate channels on both left and right sides, this creates a richer sound and a better listening experience.
JLab Go Air stay well in place, creating a sound covering that tones down background noise and also prevents the earbuds voice audio from leaking out .
JLab Go Air driver unit is 8mm in diameter, bigger drivers are more powerful, therefor producing better bass. The driver unit is the component that makes sound in the earbuds, the unit size dictates the sound made by the device.
The JLab Go Air's lowest frequency is at 20Hz, low-frequency response inidcates how well an audio device produces low recognizable frequencies and if it makes any changes to the signal on its way through.
The JLab Go Air's highest frequency is at 20,000Hz, high-frequency response tells how well an audio component makes high human frequencies and if it makes any changes to the signal while at it.
SPL, is the pressure level of sound, in decibels, dB, JLab Go Air's measurement is 103dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source.
The JLab Go Air's battery life is 5 hours, these last less than 5 hours of listening which is considered average before recharge. A device's battery life is given by the manufacturer, and with more battery hours, you get to use it for longer and requires fewer chargings.
This is given by the manufacturer, and the JLab Go Air's case is said to have a full charge of 15 hours. A charging case with more battery hours allows you to recharge your earbuds on the go many times before having to recharge the case itself.
It takes 1.5 hours to fully charge the JLab Go Air's battery. It is recommended to fully charge the battery before using the earbuds for the first time.
JLab Go Air have a battery level indicator, an indicator shows you when the earbuds has a low battery. Its lights show the charging status of your device and charging case.
The JLab Go Air have Bluetooth version of 5, Bluetooth is a wireless technology standard that allows data movement between devices placed in close proximity, using short-wavelength, ultra-high frequency radio waves.
JLab Go Air have a 10meters distance connecting via Bluetooth.
JLab Go Air have 2 microphones.
JLab Go Air microphone sensitivity is measured at -38dBV/Pa. The vastness of the analog or digital output signal from the microphone with its input stimulus is a calculation of its sensitivity. It's the 'loudness' of the voice that the earbud microphone can pick up.
The JLab Go Air, so you can access the volume control, pause, play, mute, etc whichever functions are supported on the earbuds.
The JLab Go Air have a warranty period of 2 Years, the period of time that warrant free repair and adjustment services in case of a malfunction occurring under normal use that has followed instruction manuals.
JLab Go Air support voice prompts. With voice prompts, you receive information through audio messages, say if there is an issue with the connection.