Anker Soundcore Life Q20See price on Amazon
Overall Score 6.2 Represents average audio ecosystem compatibility score.
The Anker Soundcore Life Q20 have a weight of 263g, these weigh below 320g, which we consider as the highest average a headphone should weigh for comfort during long use. We prefer a lower weight better because lighter devices are more comfortable to move with.
Detachable cables are cables that have connectors on both ends. One end goes into your headphone earpieces, while the other end is inserted into an audio source. Some new headphones, and not just the expensive ones, are coming with detachable cables, Anker Soundcore Life Q20 are one of those.
Anker Soundcore Life Q20 are foldable, which makes them more portable. Foldable headphones are easier to transport and take up less storage space.
A long cable ensures more freedom of movement, but remember that every cable based on the conducting material used has a certain amount of parasitic resistance, inductance, and capacitance. How much depends on the length and construction. Anker Soundcore Life Q20 comes with a 1.2meters cable.
Over-ear headphones have larger earpads that fit around your entire ear Anker Soundcore Life Q20 have a comfortable full-size form with earcups that fully enclose your ears. This design is loved for its increased sound isolation and the fact that it won't leak sound to your neighbors.
Anker Soundcore Life Q20 have stereo speakers, devices with stereo speakers deliver sound from separate channels on both left and right sides, this creates a richer sound and a better listening experience.
Active noise cancellation uses more advanced technology to reduce unwanted ambient sounds. How it works, it listens to the sound pattern of incoming noise and then generates a mirror signal to cancel it out. In simple terms, it's like taking +1 outside (noise from your surrounding) and adding -1 inside (counter sound within the device) to make zero hence "diluting" the noise.
Anker Soundcore Life Q20 allow you to listen at lower volume levels, causing less ear fatigue as you don't have to crank up the volume to overcome background noise.
Low-frequency response measures if and how well an audio device reproduces low audible frequencies and if it makes any changes to the signal while at it. Anker Soundcore Life Q20's lowest frequency is at 16Hz, the lower the low-frequency response, the stronger and juicier the bass.
High frequency response measures if and how well an audio component reproduces high audible frequencies and if it changes to the signal on the way through. Anker Soundcore Life Q20's highest frequency is at 40,000Hz, the higher the high-frequency response, the clearer and crispier the treble.
Sound pressure is the average variation in atmospheric pressure caused by the sound, the sound level .i.e how loud something is can be perceived differently by different people so we need to have a way of getting an objective measurement of sound level expressed in numerical terms.
The sound pressure level, SPL, is the pressure level of a sound, measured in decibels, dB, Anker Soundcore Life Q20's measurement is 95dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source.
The driver unit is basically a mini speaker that produces sound in the device, its size dictates the loudness of the headphone. Anker Soundcore Life Q20 driver unit is 40mm in diameter, bigger drivers are more powerful and can produce better bass.
Impedance is the device's resistance to the electromagnetic current, when electricity flows through a conductor, it faces electrical resistance that counters the flow of current. The resistance of a conductor is measured in ohms. Anker Soundcore Life Q20's impedance is 16Ohms, the lower the impedance, the easier it is to get higher volume and requires less power.
If your headphones play wirelessly, cancel ambient noise, or enhance your listening experience with active features, their battery life will reduce over time. The device's battery life is given by the manufacturer, with longer battery life, you get to use it for longer and have to charge the device less often. Anker Soundcore Life Q20's battery life is 40 hours
It takes 2.5 hours to fully charge the Anker Soundcore Life Q20's battery. It is recommended to fully charge the battery before using the headphones for the first time or when they have been unused for extended periods.
Anker Soundcore Life Q20 have a battery level indicator, an indicator shows you when the device has a low battery. The battery indicator lights indicate the charging status of your headphones.
Battery power, or battery capacity, represents the amount of electrical energy that a battery can store. Anker Soundcore Life Q20's battery power is 720mAh, more battery power can be an indication of longer battery life.
A rechargeable battery is a type of electrical battery that can be charged, discharged into a load, and recharged many times, as opposed to a disposable or primary battery, which is supplied fully charged and discarded after use. Anker Soundcore Life Q20's battery can be recharged and used over again.
Anker Soundcore Life Q20 can be used wirelessly, wireless devices allow users more freedom of movement.
Bluetooth is a wireless technology standard that allows data transfers between devices placed in close proximity, using short-wavelength, ultra-high frequency radio waves. Anker Soundcore Life Q20 has a v5
The Anker Soundcore Life Q20 support APTX HD, an audio codec for Bluetooth devices that are developed by Qualcomm. It supports high-quality 24-bit audio (at a bit rate of 576kbps).
Anker Soundcore Life Q20 support APTX, a codec used for transmitting audio wirelessly with Bluetooth. It is developed by Qualcomm and supports 16-bit audio at a bit rate of 384kbps.
Anker Soundcore Life Q20 support AAC, a codec that is used for Bluetooth audio. It supports 24-bit audio at 250kbps. Because it uses psychoacoustic modeling, it can provide better results than other codecs at a similar bit rate.
Bluetooth is a short-range wireless technology standard that is used for exchanging data between fixed and mobile devices over short distances. The Anker Soundcore Life Q20 can connect at a 10meters distance via Bluetooth or infrared to another device.
Being an industry standard audio plug, a standard 3.5mm male connector is suitable for use with all MP3 players and computer sound cards. This means that it is commonly used in stereo headphones to your phone or connecting your phone to an external amplifier, sound bars, your car radio, etc. Anker Soundcore Life Q20 has this connector giving it a wider range of connectivity with most of the sound devices out there. All plugs have at least a tip and sleeve with the number of rings that stand as a differentiating factor.
Anker Soundcore Life Q20 have only 4 microphones, more microphones result in better sound quality and enable the device to filter out background noise.
Anker Soundcore Life Q20 use a noise-canceling type of microphone, these microphones are designed to filter out background noise from the desired sound. Especially useful in noisy environments.
Anker Soundcore Life Q20 support ambient sound mode, which uses microphones to pass through ambient noises so that they can still be heard. It’s useful when you want to listen to music but also be aware of what’s happening around you, for example when you’re having a jog but would still want to be able to hear traffic.
Anker Soundcore Life Q20 have a mute function, they have an option to mute/unmute a conversation directly from the device. The mute function means that you unilaterally turn off the microphone, but you can still hear the other party's voice.
Anker Soundcore Life Q20 support multipoint, which allows you to link to more Bluetooth devices and switch between them. For example, you can easily switch calls from one device to another without having to manually disconnect and reconnect.
There is a control panel on the Anker Soundcore Life Q20 body, so you can easily access the volume control or remote without having to interact with a cable or another device it's connected to.
Anker Soundcore Life Q20 can be used as a headset. A headset is one headphone or pair with a built-in microphone. Headsets can be used for apps that require communication i.e. Zoom, Google Meet, Skype, games with voice chat, mobile phones, etc.
The period of time that warrant free repair and adjustment services in case of a malfunction occurring under normal use that has followed instruction manuals. When covered under the manufacturer’s warranty it is possible to get a replacement in the case of a malfunction. Anker Soundcore Life Q20 have a warranty period of 1.5 years
Carrying headphones without a case, or putting them in bags without a casing can easily put them at risk of getting damaged. The Anker Soundcore Life Q20 come with their own special case or pouch, which is useful for safe transportation.